3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Updated G Code in Marlin (markdown)

paulusjacobus 2016-03-08 19:43:54 +11:00
parent 060f0b40d3
commit f5b65444dd
1 changed files with 11 additions and 11 deletions
Download patch file Download diff file Expand all files Collapse all files

16
G-Code-in-Marlin.md

@ -111,16 +111,16 @@ extrude-only move will be classified as retract depending on the direction
###Z Probe ###Z Probe
[[G28]] - Home one or more axes. Note G28 clears the bed leveling compensation matrix so use G28 followed by G29 [[G28]] - Home one or more axes. Note G28 clears the bed leveling compensation matrix so use G28 followed by G29
[[G29]] - Probe the bed Z height at multiple points and enable bed leveling compensation (ABL). [[G29]] - Probe the bed Z height at multiple points and enable bed leveling compensation (ABL)
[[G30]] - Probe the bed Z height at the current XY position. [[G30]] - Probe the bed Z height at the current XY position
[[G31]] - Dock Z Probe sled. [[G31]] - Dock Z Probe sled
[[G32]] - Undock Z Probe sled. [[G32]] - Undock Z Probe sled
[[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe for bed leveling (ret standard deviation). [[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe for bed leveling (ret standard deviation)
[[M401]] - Lower auto bed leveling Z-probe with a servo, ensure you are safe above the bed to clear the Allen key. [[M401]] - Lower auto bed leveling Z-probe with a servo, ensure you are safe above the bed to clear the Allen key
[[M402]] - Raise Z-probe. Note: drives the servo [[M402]] - Raise Z-probe. Note: drives the servo
[[M420]] - Enable or disable Mesh Bed Leveling. [[M420]] - Enable or disable Mesh Bed Leveling
[[M421]] - Set a single Mesh Bed Leveling Z coordinate: X<pos> Y<pos> Z<pos> [[M421]] - Set a single Mesh Bed Leveling Z coordinate: X<pos> Y<pos> Z<pos>
[[M851]] - Set/fine tune the z probe offset. M851 Z-6.90, store with M500 in EEPROM (if enabled). [[M851]] - Set/fine tune the z probe offset. M851 Z-6.90, store with M500 in EEPROM (if enabled)
###Filament Diameter ###Filament Diameter
[[M404]] - Set (or display) Nominal Filament Diameter in mm: [N<diameter>] (e.g., 3mm or 1.75mm) [[M404]] - Set (or display) Nominal Filament Diameter in mm: [N<diameter>] (e.g., 3mm or 1.75mm)