3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Update pins_FLSUN_HISPEED.h

Browse source 
Correction some typo
This commit is contained in:
Foxies 2020-10-31 17:16:29 +01:00
parent 7b596b5771
commit f5325625ff
1 changed files with 13 additions and 14 deletions
Download patch file Download diff file Expand all files Collapse all files

27
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
View file

@ -148,18 +148,19 @@
/** /**
* src: MKS Robin_Mini V2 * src: MKS Robin_Mini V2
* __ESP(M1)__ -J1- * __ESP(M1)__ -J1-
* GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) // * GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) //
* | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating * | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating
* IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) * IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating) * IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating)
* IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run * IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run
* | nc | | nc | (01)=>WIFI_CTRL(PA5) * | nc | | nc | (01)=>WIFI_CTRL(PA5)
* RX| 21 | | nc | * RX| 21 | | nc |
* TX| 22 | | 01 |RST * TX| 22 | | 01 |RST
* ￣￣ AE￣￣ * ￣￣ AE￣￣
*/ */
#define WIFI_IO0_PIN PA8 // PC13 MKS ESP WIFI IO0 PIN //Module ESP-WIFI
#define WIFI_IO0_PIN PA8 // MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN #define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN #define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN
#endif #endif
@ -168,15 +169,13 @@
// EXTRUDER // EXTRUDER
// //
#if AXIS_DRIVER_TYPE(E0,TMC2208)||AXIS_DRIVER_TYPE(E0,TMC2209) #if AXIS_DRIVER_TYPE(E0,TMC2208)||AXIS_DRIVER_TYPE(E0,TMC2209)
#define E0_SLAVE_ADDRESS 0
#define E0_SERIAL_TX_PIN PA8 // IO0 #define E0_SERIAL_TX_PIN PA8 // IO0
#define E0_SERIAL_RX_PIN PA8 // IO0 #define E0_SERIAL_RX_PIN PA8 // IO0
#define TMC_BAUD_RATE 19200 #define TMC_BAUD_RATE 19200
#else #else
// Motor current PWM pins // Motor current PWM pins
#define MOTOR_CURRENT_PWM_E_PIN PB0 // VREF1 CONTROL E #define MOTOR_CURRENT_PWM_E_PIN PB0 // VREF1 CONTROL E
#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp #define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp
#ifndef DEFAULT_PWM_MOTOR_CURRENT #ifndef DEFAULT_PWM_MOTOR_CURRENT
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
#endif #endif
@ -339,8 +338,8 @@
#endif #endif
#define TFT_MARLINUI_COLOR 0xFFFF // White #define TFT_MARLINUI_COLOR 0xFFFF // White
#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow #define TFT_BTARROWS_COLOR 0xDEE6 // Yellow
#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan #define TFT_BTOKMENU_COLOR 0x145F // Cyan
#endif #endif
#if NEED_TOUCH_PINS #if NEED_TOUCH_PINS