From f5325625ffeb5dfcc9433f981d5c4ba1381c337e Mon Sep 17 00:00:00 2001 From: Foxies Date: Sat, 31 Oct 2020 17:16:29 +0100 Subject: [PATCH] Update pins_FLSUN_HISPEED.h Correction some typo --- Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h | 27 ++++++++++---------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h index 715a808034..46d4f3a390 100644 --- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h +++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h @@ -148,18 +148,19 @@ /** * src: MKS Robin_Mini V2 - * __ESP(M1)__ -J1- - * GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) // - * | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating - * IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) - * IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating) - * IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run - * | nc | | nc | (01)=>WIFI_CTRL(PA5) + * __ESP(M1)__ -J1- + * GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) // + * | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating + * IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) + * IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating) + * IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run + * | nc | | nc | (01)=>WIFI_CTRL(PA5) * RX| 21 | | nc | * TX| 22 | | 01 |RST * ￣￣ AE￣￣ */ - #define WIFI_IO0_PIN PA8 // PC13 MKS ESP WIFI IO0 PIN + //Module ESP-WIFI + #define WIFI_IO0_PIN PA8 // MKS ESP WIFI IO0 PIN #define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN #define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN #endif @@ -168,15 +169,13 @@ // EXTRUDER // #if AXIS_DRIVER_TYPE(E0,TMC2208)||AXIS_DRIVER_TYPE(E0,TMC2209) - #define E0_SLAVE_ADDRESS 0 - #define E0_SERIAL_TX_PIN PA8 // IO0 #define E0_SERIAL_RX_PIN PA8 // IO0 - #define TMC_BAUD_RATE 19200 + #define TMC_BAUD_RATE 19200 #else // Motor current PWM pins #define MOTOR_CURRENT_PWM_E_PIN PB0 // VREF1 CONTROL E - #define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp + #define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp #ifndef DEFAULT_PWM_MOTOR_CURRENT #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } #endif @@ -339,8 +338,8 @@ #endif #define TFT_MARLINUI_COLOR 0xFFFF // White - #define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - #define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan + #define TFT_BTARROWS_COLOR 0xDEE6 // Yellow + #define TFT_BTOKMENU_COLOR 0x145F // Cyan #endif #if NEED_TOUCH_PINS