diff --git a/Marlin-Configuration.mediawiki b/Marlin-Configuration.mediawiki
index 0636a89..9596f5c 100644
--- a/Marlin-Configuration.mediawiki
+++ b/Marlin-Configuration.mediawiki
@@ -74,32 +74,32 @@ Use POWER_SUPPLY to select the type of power supply, as below. Enable PS_DEFAULT
TEMP_SENSOR_3 0
TEMP_SENSOR_BED 0
Define all your attached temperature sensors here. The following temperature sensor values are available:
-* -2 Thermocouple with MAX6675 (only for sensor 0)
-* -1 Thermocouple with AD595
-* 0 ''no thermistor''
-* 1 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
-* 2 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
-* 3 Mendel-parts thermistor (4.7k pullup)
-* 4 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
-* 5 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
-* 6 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
-* 7 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
-* 71 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
-* 8 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
-* 9 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
-* 10 100k RS thermistor 198-961 (4.7k pullup)
-* 11 100k beta 3950 1% thermistor (4.7k pullup)
-* 12 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
-* 13 100k Hisens 3950 - 1% up to 300°C for hotend "Simple ONE " & "All In ONE"
-* 20 the PT100 circuit found in the Ultimainboard V2.x
-* 60 100k Maker's Tool Works Kapton Bed Thermistor beta=3950. 1k ohm pullup tables - This not normal, you would have to have changed out your 4.7k for 1k (but gives greater accuracy and more stable PID).
-* 51 100k thermistor - EPCOS (1k pullup)
-* 52 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
-* 55 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+* -2 Thermocouple with MAX6675 (only for sensor 0)
+* -1 Thermocouple with AD595
+* 0 ''no thermistor''
+* 1 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+* 2 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+* 3 Mendel-parts thermistor (4.7k pullup)
+* 4 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
+* 5 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+* 6 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+* 7 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+* 71 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
+* 8 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+* 9 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+* 10 100k RS thermistor 198-961 (4.7k pullup)
+* 11 100k beta 3950 1% thermistor (4.7k pullup)
+* 12 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+* 13 100k Hisens 3950 - 1% up to 300°C for hotend "Simple ONE " & "All In ONE"
+* 20 the PT100 circuit found in the Ultimainboard V2.x
+* 60 100k Maker's Tool Works Kapton Bed Thermistor beta=3950. 1k ohm pullup tables - This not normal, you would have to have changed out your 4.7k for 1k (but gives greater accuracy and more stable PID).
+* 51 100k thermistor - EPCOS (1k pullup)
+* 52 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+* 55 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
* 1047 Pt1000 with 4k7 pullup
* 1010 Pt1000 with 1k pullup (non standard)
-* 147 Pt100 with 4k7 pullup
-* 110 Pt100 with 1k pullup (non standard)
+* 147 Pt100 with 4k7 pullup
+* 110 Pt100 with 1k pullup (non standard)
* 998 and 999 Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
// DUMMY_THERMISTOR_998_VALUE 25