3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Updated G Code in Marlin (markdown)

paulusjacobus 2016-03-08 19:34:46 +11:00
parent 99c0f6f16d
commit ad0b150866
1 changed files with 6 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

11
G-Code-in-Marlin.md

@ -110,16 +110,17 @@ of M200 setting
extrude-only move will be classified as retract depending on the direction
###Z Probe
[[G28]] - Home one or more axes.
[[G29]] - Probe the bed Z height at multiple points and enable bed leveling compensation.
[[G28]] - Home one or more axes. Note: G28 clears the bed leveling compensation matrix. Use G28 followed by G29
[[G29]] - Probe the bed Z height at multiple points and enable bed leveling compensation (ABL).
[[G30]] - Probe the bed Z height at the current XY position.
[[G31]] - Dock Z Probe sled.
[[G32]] - Undock Z Probe sled.
[[M48]] - Measure Z Probe repeatability.
[[M401]] - Lower Z-probe.
[[M402]] - Raise Z-probe.
[[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe (i.e. servo/switch Allen key or inductive probe). Returns the standard deviation in microns.
[[M401]] - Lower Z-probe. Note: ABL with a servo. With an Allen key z-probe switch, ensure you are safe above the bed to clear the Allen key.
[[M402]] - Raise Z-probe. Note: drives the servo
[[M420]] - Enable or disable Mesh Bed Leveling.
[[M421]] - Set a single Mesh Bed Leveling Z coordinate: X<pos> Y<pos> Z<pos>
[[M851]] - Set/fine tune the z probe offset. M851 Z-6.90, store with M500 in EEPROM (if enabled).
###Filament Diameter
[[M404]] - Set (or display) Nominal Filament Diameter in mm: [N<diameter>] (e.g., 3mm or 1.75mm)