From 99c0f6f16de6940e25a6cd2ecf23b69af596f89a Mon Sep 17 00:00:00 2001
From: paulusjacobus <pauljacobdegroot@gmail.com>
Date: Tue, 8 Mar 2016 19:24:23 +1100
Subject: [PATCH] Updated Marlin Configuration (mediawiki)

---
 Marlin-Configuration.mediawiki | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Marlin-Configuration.mediawiki b/Marlin-Configuration.mediawiki
index 62171a9..fa950c8 100644
--- a/Marlin-Configuration.mediawiki
+++ b/Marlin-Configuration.mediawiki
@@ -326,6 +326,8 @@ Choose one of these three alternative kinematics if needed. [[Delta kinematics|D
     // MANUAL_Z_HOME_POS 402
   '''#endif'''
 
+Note: you might need to configure a servo to deploy the z-probe (see servos)
+
 == Movement Settings ==
 
   HOMING_FEEDRATE { 50*60, 50*60, 4*60, 0 }
@@ -437,6 +439,7 @@ Choose one of these three alternative kinematics if needed. [[Delta kinematics|D
   // NUM_SERVOS 3
   // SERVO_ENDSTOPS { -1, -1, 0 }
   // SERVO_ENDSTOP_ANGLES { 0,0, 0,0, 70,0 }
+Note: Auto bed leveling config - if you use a servo that deploys an Allen (shape) key z-probe with a micro switch connected parallel (or in series) with z min end stop then you you need to enable the servo configuration. Another option is to use an inductive sensor (no servo used)
 
 == Filament Width Sensor ==