From 060f0b40d3e66da1accb927fdcfad4604419ef83 Mon Sep 17 00:00:00 2001 From: paulusjacobus Date: Tue, 8 Mar 2016 19:41:01 +1100 Subject: [PATCH] clean up formatting --- G-Code-in-Marlin.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/G-Code-in-Marlin.md b/G-Code-in-Marlin.md index 7c883ac..da375f8 100644 --- a/G-Code-in-Marlin.md +++ b/G-Code-in-Marlin.md @@ -115,8 +115,8 @@ extrude-only move will be classified as retract depending on the direction [[G30]] - Probe the bed Z height at the current XY position. [[G31]] - Dock Z Probe sled. [[G32]] - Undock Z Probe sled. - [[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe (i.e. servo/switch Allen key or inductive probe). Returns the standard deviation in microns. - [[M401]] - Lower Z-probe. Note: ABL with a servo. With an Allen key z-probe switch, ensure you are safe above the bed to clear the Allen key. + [[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe for bed leveling (ret standard deviation). + [[M401]] - Lower auto bed leveling Z-probe with a servo, ensure you are safe above the bed to clear the Allen key. [[M402]] - Raise Z-probe. Note: drives the servo [[M420]] - Enable or disable Mesh Bed Leveling. [[M421]] - Set a single Mesh Bed Leveling Z coordinate: X Y Z