Update QQS_Pro Stock/TMC/UART
This commit is contained in:
Foxies
parent
1d48941580
commit
f741c8df92
3 changed files with 321 additions and 145 deletions
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQ-S"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -67,11 +69,18 @@
|
|||
// config/examples/SCARA and customize for your machine.
|
||||
//
|
||||
|
||||
// @section info
|
||||
#define QQS
|
||||
//#define QQS_TMC
|
||||
//#define QQS_UART //Remove module ESP12
|
||||
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
#define AUTO_BED_LEVELING_UBL
|
||||
//#define LIN_ADVANCE
|
||||
|
||||
// @section info
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
//#define STRING_CONFIG_H_AUTHOR "(AndersSahlman, QQ-S)" // Who made the changes.
|
||||
#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
* *** VENDORS PLEASE READ ***
|
||||
|
|
@ -103,14 +112,18 @@
|
|||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT 0
|
||||
#ifdef QQS_UART
|
||||
#define SERIAL_PORT 3
|
||||
|
||||
/**
|
||||
* Select a secondary serial port on the board to use for communication with the host.
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
//#define SERIAL_PORT_2 -1
|
||||
|
||||
#define SERIAL_PORT_2 -1 //Remove module ESP12
|
||||
#else
|
||||
#define SERIAL_PORT 3
|
||||
#define SERIAL_PORT_2 1
|
||||
#endif
|
||||
/**
|
||||
* This setting determines the communication speed of the printer.
|
||||
*
|
||||
|
|
@ -127,11 +140,20 @@
|
|||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_FLSUN_HISPEED
|
||||
//#define MOTHERBOARD BOARD_MKS_ROBIN_MINI
|
||||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#ifdef QQS
|
||||
#define CUSTOM_MACHINE_NAME "FLSUN QQ-S"
|
||||
#endif
|
||||
#ifdef QQS_TMC
|
||||
#define CUSTOM_MACHINE_NAME "FLSUN QQ-S TMC"
|
||||
#endif
|
||||
#ifdef QQS_UART
|
||||
#define CUSTOM_MACHINE_NAME "FLSUN QQ-S UART"
|
||||
#endif
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
|
|
@ -424,7 +446,7 @@
|
|||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_6 0
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
|
|
@ -441,7 +463,7 @@
|
|||
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
|
||||
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190
|
||||
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
|
|
@ -468,7 +490,7 @@
|
|||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 120
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
|
|
@ -517,7 +539,7 @@
|
|||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
|
||||
*/
|
||||
//#define PIDTEMPBED
|
||||
#define PIDTEMPBED
|
||||
|
||||
//#define BED_LIMIT_SWITCHING
|
||||
|
||||
|
|
@ -567,7 +589,7 @@
|
|||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
#define EXTRUDE_MAXLENGTH 950
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -606,6 +628,62 @@
|
|||
//#define COREZY
|
||||
//#define MARKFORGED_XY // MarkForged. See https://reprap.org/forum/read.php?152,504042
|
||||
|
||||
//===========================================================================
|
||||
//============================== Delta Settings =============================
|
||||
//===========================================================================
|
||||
// Enable DELTA kinematics and most of the default configuration for Deltas
|
||||
#define DELTA
|
||||
|
||||
#if ENABLED(DELTA)
|
||||
|
||||
// Make delta curves from many straight lines (linear interpolation).
|
||||
// This is a trade-off between visible corners (not enough segments)
|
||||
// and processor overload (too many expensive sqrt calls).
|
||||
#define DELTA_SEGMENTS_PER_SECOND 200
|
||||
|
||||
// After homing move down to a height where XY movement is unconstrained
|
||||
#define DELTA_HOME_TO_SAFE_ZONE
|
||||
|
||||
// Delta calibration menu
|
||||
// uncomment to add three points calibration menu option.
|
||||
// See http://minow.blogspot.com/index.html#4918805519571907051
|
||||
#define DELTA_CALIBRATION_MENU
|
||||
|
||||
// uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
|
||||
#define DELTA_AUTO_CALIBRATION
|
||||
|
||||
// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
|
||||
|
||||
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
||||
// set the default number of probe points : n*n (1 -> 7)
|
||||
#define DELTA_CALIBRATION_DEFAULT_POINTS 9
|
||||
#endif
|
||||
|
||||
#if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
|
||||
// Set the steprate for papertest probing
|
||||
#define PROBE_MANUALLY_STEP 0.05 // (mm)
|
||||
#endif
|
||||
|
||||
// Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
|
||||
#define DELTA_PRINTABLE_RADIUS 130.0 // (mm)
|
||||
|
||||
// Center-to-center distance of the holes in the diagonal push rods.
|
||||
#define DELTA_DIAGONAL_ROD 280.0 // (mm)
|
||||
// Distance between bed and nozzle Z home position
|
||||
#define DELTA_HEIGHT 360.00 // (mm) Get this value from G33 auto calibrate
|
||||
#define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate
|
||||
// Horizontal distance bridged by diagonal push rods when effector is centered.
|
||||
#define DELTA_RADIUS 140.8 // (mm) Get this value from G33 auto calibrate
|
||||
// Trim adjustments for individual towers
|
||||
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
|
||||
// measured in degrees anticlockwise looking from above the printer
|
||||
#define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate
|
||||
// Delta radius and diagonal rod adjustments (mm)
|
||||
//#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
//#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
|
||||
|
||||
#endif
|
||||
|
||||
//===========================================================================
|
||||
//============================== Endstop Settings ===========================
|
||||
//===========================================================================
|
||||
|
|
@ -615,12 +693,12 @@
|
|||
// Specify here all the endstop connectors that are connected to any endstop or probe.
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
|
||||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
//#define USE_XMIN_PLUG
|
||||
//#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG // a Z probe
|
||||
#define USE_XMAX_PLUG
|
||||
#define USE_YMAX_PLUG
|
||||
#define USE_ZMAX_PLUG
|
||||
|
||||
// Enable pullup for all endstops to prevent a floating state
|
||||
#define ENDSTOPPULLUPS
|
||||
|
|
@ -649,13 +727,13 @@
|
|||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
|
||||
/**
|
||||
* Stepper Drivers
|
||||
|
|
@ -673,15 +751,25 @@
|
|||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
//#define X_DRIVER_TYPE A4988
|
||||
//#define Y_DRIVER_TYPE A4988
|
||||
//#define Z_DRIVER_TYPE A4988
|
||||
#ifdef QQS
|
||||
#define DRIVER_USED A4988
|
||||
#endif
|
||||
#ifdef QQS_TMC
|
||||
#define DRIVER_USED TMC2208_STANDALONE
|
||||
#endif
|
||||
#ifdef QQS_UART
|
||||
#define DRIVER_USED TMC2208
|
||||
#endif
|
||||
|
||||
#define X_DRIVER_TYPE DRIVER_USED
|
||||
#define Y_DRIVER_TYPE DRIVER_USED
|
||||
#define Z_DRIVER_TYPE DRIVER_USED
|
||||
//#define X2_DRIVER_TYPE A4988
|
||||
//#define Y2_DRIVER_TYPE A4988
|
||||
//#define Z2_DRIVER_TYPE A4988
|
||||
//#define Z3_DRIVER_TYPE A4988
|
||||
//#define Z4_DRIVER_TYPE A4988
|
||||
//#define E0_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE DRIVER_USED
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
//#define E3_DRIVER_TYPE A4988
|
||||
|
|
@ -716,6 +804,7 @@
|
|||
//=============================================================================
|
||||
// @section motion
|
||||
|
||||
// delta speeds must be the same on xyz
|
||||
/**
|
||||
* Default Settings
|
||||
*
|
||||
|
|
@ -736,14 +825,25 @@
|
|||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
|
||||
// variables to calculate steps
|
||||
#define XYZ_FULL_STEPS_PER_ROTATION 200
|
||||
#define XYZ_MICROSTEPS 16
|
||||
//#define XYZ_MICROSTEPS 32
|
||||
#define XYZ_BELT_PITCH 2
|
||||
#define XYZ_PULLEY_TEETH 16
|
||||
|
||||
// delta speeds must be the same on xyz
|
||||
#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 393 } // default steps per unit
|
||||
//The next line below calculates the staps value and the 800 value is my E-Steps calculation (400 doubled for 32 steps, if 16 steps then its 400 for me, meaure this with Extrusion test)
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 800 } // default steps per unit
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -756,7 +856,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -783,17 +883,17 @@
|
|||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
//#define CLASSIC_JERK
|
||||
#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.3
|
||||
#define DEFAULT_XJERK 10.0 //8 //10.0
|
||||
#define DEFAULT_YJERK DEFAULT_XJERK
|
||||
#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
|
||||
|
||||
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
||||
|
||||
//#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
|
||||
#if ENABLED(LIMITED_JERK_EDITING)
|
||||
#define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
|
||||
#define MAX_JERK_EDIT_VALUES { 20, 20, 20, 10 } // ...or, set your own edit limits
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -877,7 +977,7 @@
|
|||
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
||||
* (e.g., an inductive probe or a nozzle-based probe-switch.)
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Use the nozzle as the probe, as with a conductive
|
||||
|
|
@ -947,9 +1047,38 @@
|
|||
*/
|
||||
//#define SENSORLESS_PROBING
|
||||
|
||||
//
|
||||
// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
|
||||
//
|
||||
/**
|
||||
* Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||
* Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
|
||||
*/
|
||||
//#define Z_PROBE_ALLEN_KEY
|
||||
|
||||
#if ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
// 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
|
||||
// if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 }
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 }
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 }
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 }
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED
|
||||
|
||||
#endif // Z_PROBE_ALLEN_KEY
|
||||
|
||||
/**
|
||||
* Nozzle-to-Probe offsets { X, Y, Z }
|
||||
|
|
@ -981,7 +1110,7 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.2 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
|
|
@ -1022,10 +1151,10 @@
|
|||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
|
|
@ -1034,7 +1163,7 @@
|
|||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
|
||||
// Enable the M48 repeatability test to test probe accuracy
|
||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
|
||||
// Before deploy/stow pause for user confirmation
|
||||
//#define PAUSE_BEFORE_DEPLOY_STOW
|
||||
|
|
@ -1053,7 +1182,7 @@
|
|||
#if ENABLED(PROBING_HEATERS_OFF)
|
||||
//#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
|
||||
#endif
|
||||
//#define PROBING_FANS_OFF // Turn fans off when probing
|
||||
#define PROBING_FANS_OFF // Turn fans off when probing
|
||||
//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
|
||||
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
|
||||
|
||||
|
|
@ -1081,14 +1210,19 @@
|
|||
// @section machine
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#ifdef QQS
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR false
|
||||
#else
|
||||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
|
||||
#define INVERT_Z_DIR true
|
||||
#endif
|
||||
// @section extruder
|
||||
|
||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
#define INVERT_E0_DIR false
|
||||
#define INVERT_E0_DIR true
|
||||
#define INVERT_E1_DIR false
|
||||
#define INVERT_E2_DIR false
|
||||
#define INVERT_E3_DIR false
|
||||
|
|
@ -1099,7 +1233,7 @@
|
|||
|
||||
// @section homing
|
||||
|
||||
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
|
||||
#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
|
||||
|
||||
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
|
||||
|
||||
|
|
@ -1110,23 +1244,23 @@
|
|||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define Z_HOME_DIR -1
|
||||
#define X_HOME_DIR 1 // deltas always home to max
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR 1
|
||||
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2)
|
||||
#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2)
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS)
|
||||
#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS)
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define X_MAX_POS DELTA_PRINTABLE_RADIUS
|
||||
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
|
||||
#define Z_MAX_POS MANUAL_Z_HOME_POS
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
|
|
@ -1230,14 +1364,14 @@
|
|||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
//#define AUTO_BED_LEVELING_UBL //TMC
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
* Normally G28 leaves leveling disabled on completion. Enable
|
||||
* this option to have G28 restore the prior leveling state.
|
||||
*/
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
#define RESTORE_LEVELING_AFTER_G28
|
||||
|
||||
/**
|
||||
* Enable detailed logging of G28, G29, M48, etc.
|
||||
|
|
@ -1250,7 +1384,7 @@
|
|||
// Gradually reduce leveling correction until a set height is reached,
|
||||
// at which point movement will be level to the machine's XY plane.
|
||||
// The height can be set with M420 Z<height>
|
||||
#define ENABLE_LEVELING_FADE_HEIGHT
|
||||
//#define ENABLE_LEVELING_FADE_HEIGHT
|
||||
|
||||
// For Cartesian machines, instead of dividing moves on mesh boundaries,
|
||||
// split up moves into short segments like a Delta. This follows the
|
||||
|
|
@ -1276,7 +1410,8 @@
|
|||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
// Works best with 5 or more points in each dimension.
|
||||
#define GRID_MAX_POINTS_X 9
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
|
|
@ -1358,18 +1493,18 @@
|
|||
* Commands to execute at the end of G29 probing.
|
||||
* Useful to retract or move the Z probe out of the way.
|
||||
*/
|
||||
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
|
||||
//#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30"
|
||||
|
||||
// @section homing
|
||||
|
||||
// The center of the bed is at (X=0, Y=0)
|
||||
//#define BED_CENTER_AT_0_0
|
||||
#define BED_CENTER_AT_0_0
|
||||
|
||||
// Manually set the home position. Leave these undefined for automatic settings.
|
||||
// For DELTA this is the top-center of the Cartesian print volume.
|
||||
//#define MANUAL_X_HOME_POS 0
|
||||
//#define MANUAL_Y_HOME_POS 0
|
||||
//#define MANUAL_Z_HOME_POS 0
|
||||
#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
|
||||
|
||||
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
|
||||
//
|
||||
|
|
@ -1466,12 +1601,12 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#endif
|
||||
|
||||
//
|
||||
|
|
@ -1498,14 +1633,14 @@
|
|||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
#define PREHEAT_1_TEMP_HOTEND 200
|
||||
#define PREHEAT_1_TEMP_BED 60
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
#define PREHEAT_2_LABEL "PETG"
|
||||
#define PREHEAT_2_TEMP_HOTEND 235
|
||||
#define PREHEAT_2_TEMP_BED 80
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
/**
|
||||
* Nozzle Park
|
||||
|
|
@ -1518,11 +1653,11 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 20), 0, 20 }
|
||||
//#define NOZZLE_PARK_X_ONLY // X move only is required to park
|
||||
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
|
|
@ -1631,7 +1766,38 @@
|
|||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
|
||||
/**
|
||||
* Password
|
||||
*
|
||||
* Set a numerical password for the printer which can be requested:
|
||||
*
|
||||
* - When the printer boots up
|
||||
* - Upon opening the 'Print from Media' Menu
|
||||
* - When SD printing is completed or aborted
|
||||
*
|
||||
* The following G-codes can be used:
|
||||
*
|
||||
* M510 - Lock Printer. Blocks all commands except M511.
|
||||
* M511 - Unlock Printer.
|
||||
* M512 - Set, Change and Remove Password.
|
||||
*
|
||||
* If you forget the password and get locked out you'll need to re-flash
|
||||
* the firmware with the feature disabled, reset EEPROM, and (optionally)
|
||||
* re-flash the firmware again with this feature enabled.
|
||||
*/
|
||||
//#define PASSWORD_FEATURE
|
||||
#if ENABLED(PASSWORD_FEATURE)
|
||||
#define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
|
||||
#define PASSWORD_ON_STARTUP
|
||||
#define PASSWORD_UNLOCK_GCODE // Unlock with the M511 P<password> command. Disable to prevent brute-force attack.
|
||||
#define PASSWORD_CHANGE_GCODE // Change the password with M512 P<old> N<new>.
|
||||
//#define PASSWORD_ON_SD_PRINT_MENU // This does not prevent gcodes from running
|
||||
//#define PASSWORD_AFTER_SD_PRINT_END
|
||||
//#define PASSWORD_AFTER_SD_PRINT_ABORT
|
||||
//#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Password
|
||||
|
|
@ -1680,7 +1846,7 @@
|
|||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'hu':'Hungarian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ro':'Romanian', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
#define LCD_LANGUAGE fr
|
||||
|
||||
/**
|
||||
* LCD Character Set
|
||||
|
|
@ -1719,7 +1885,8 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
//#define SDIO_SUPPORT ///define in pins definitions
|
||||
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
|
|
@ -2235,7 +2402,7 @@
|
|||
// root of your SD card, together with the compiled firmware.
|
||||
//
|
||||
//#define TFT_LVGL_UI_FSMC // Robin nano v1.2 uses FSMC
|
||||
//#define TFT_LVGL_UI_SPI // Robin nano v2.0 uses SPI
|
||||
//#define TFT_LVGL_UI_SPI // Robin nano v2.0 uses SPI_GRAPHICAL_TFT
|
||||
|
||||
//=============================================================================
|
||||
//============================ Other Controllers ============================
|
||||
|
|
@ -2285,14 +2452,14 @@
|
|||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||
//#define FAN_SOFT_PWM
|
||||
#define FAN_SOFT_PWM
|
||||
|
||||
// Incrementing this by 1 will double the software PWM frequency,
|
||||
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
// However, control resolution will be halved for each increment;
|
||||
// at zero value, there are 128 effective control positions.
|
||||
// :[0,1,2,3,4,5,6,7]
|
||||
#define SOFT_PWM_SCALE 0
|
||||
#define SOFT_PWM_SCALE 1
|
||||
|
||||
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
|
||||
// be used to mitigate the associated resolution loss. If enabled,
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQ-S"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -413,7 +415,7 @@
|
|||
// When first starting the main fan, run it at full speed for the
|
||||
// given number of milliseconds. This gets the fan spinning reliably
|
||||
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
||||
//#define FAN_KICKSTART_TIME 100
|
||||
#define FAN_KICKSTART_TIME 100
|
||||
|
||||
// Some coolers may require a non-zero "off" state.
|
||||
//#define FAN_OFF_PWM 1
|
||||
|
|
@ -653,8 +655,9 @@
|
|||
|
||||
//#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing
|
||||
|
||||
#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump
|
||||
// For delta all values must be the same
|
||||
#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
|
||||
|
||||
|
|
@ -783,7 +786,7 @@
|
|||
|
||||
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
|
||||
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
|
||||
// After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
|
||||
|
|
@ -860,7 +863,7 @@
|
|||
|
||||
// Slow down the machine if the lookahead buffer is (by default) half full.
|
||||
// Increase the slowdown divisor for larger buffer sizes.
|
||||
#define SLOWDOWN
|
||||
//#define SLOWDOWN
|
||||
#if ENABLED(SLOWDOWN)
|
||||
#define SLOWDOWN_DIVISOR 2
|
||||
#endif
|
||||
|
|
@ -991,6 +994,8 @@
|
|||
|
||||
// Microstep settings (Requires a board with pins named X_MS1, X_MS2, etc.)
|
||||
#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
|
||||
//change the line below for you steps mine is set to 32 change to 16 if you want default but make sure you change in configuration.h as well.
|
||||
//#define MICROSTEP_MODES { 32, 32, 32, 32, 16, 16 } //TMC [1,2,4,8,16]
|
||||
|
||||
/**
|
||||
* @section stepper motor current
|
||||
|
|
@ -1096,7 +1101,7 @@
|
|||
* LED Control Menu
|
||||
* Add LED Control to the LCD menu
|
||||
*/
|
||||
//#define LED_CONTROL_MENU
|
||||
//#define LED_CONTROL_MENU //RGB
|
||||
#if ENABLED(LED_CONTROL_MENU)
|
||||
#define LED_COLOR_PRESETS // Enable the Preset Color menu option
|
||||
//#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option
|
||||
|
|
@ -1121,16 +1126,16 @@
|
|||
#endif // HAS_LCD_MENU
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// On the Info Screen, display XY with one decimal place when possible
|
||||
//#define LCD_DECIMAL_SMALL_XY
|
||||
|
||||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
#define LCD_TIMEOUT_TO_STATUS 15000 //OPT
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// Show the E position (filament used) during printing
|
||||
//#define LCD_SHOW_E_TOTAL
|
||||
|
|
@ -1197,13 +1202,13 @@
|
|||
* an option on the LCD screen to continue the print from the last-known
|
||||
* point in the file.
|
||||
*/
|
||||
//#define POWER_LOSS_RECOVERY
|
||||
//*#define POWER_LOSS_RECOVERY
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
#define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
|
||||
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
|
||||
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
//#define POWER_LOSS_PIN PA2 or PA1 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
|
|
@ -1253,10 +1258,10 @@
|
|||
#endif
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
// Enable this option to scroll long filenames in the SD card menu
|
||||
//#define SCROLL_LONG_FILENAMES
|
||||
//#define SCROLL_LONG_FILENAMES //OPT
|
||||
|
||||
// Leave the heaters on after Stop Print (not recommended!)
|
||||
//#define SD_ABORT_NO_COOLDOWN
|
||||
|
|
@ -1273,7 +1278,7 @@
|
|||
* On print completion the LCD Menu will open with the file selected.
|
||||
* You can just click to start the print, or navigate elsewhere.
|
||||
*/
|
||||
//#define SD_REPRINT_LAST_SELECTED_FILE
|
||||
#define SD_REPRINT_LAST_SELECTED_FILE //OPT
|
||||
|
||||
/**
|
||||
* Auto-report SdCard status with M27 S<seconds>
|
||||
|
|
@ -1484,7 +1489,7 @@
|
|||
//#define LCD_FYSETC_TFT81050 // FYSETC with 5" (800x480)
|
||||
|
||||
// Correct the resolution if not using the stock TFT panel.
|
||||
//#define TOUCH_UI_320x240
|
||||
//#define TOUCH_UI_320x240 //TFT_UI
|
||||
//#define TOUCH_UI_480x272
|
||||
//#define TOUCH_UI_800x480
|
||||
|
||||
|
|
@ -1545,7 +1550,7 @@
|
|||
|
||||
// Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
|
||||
//#define LCD_LANGUAGE_1 en
|
||||
//#define LCD_LANGUAGE_2 fr
|
||||
//#define LCD_LANGUAGE_2 fr //TFT_UI
|
||||
//#define LCD_LANGUAGE_3 de
|
||||
//#define LCD_LANGUAGE_4 es
|
||||
//#define LCD_LANGUAGE_5 it
|
||||
|
|
@ -1606,7 +1611,7 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
|
|
@ -1617,7 +1622,7 @@
|
|||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
|
|
@ -1629,7 +1634,7 @@
|
|||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
|
|
@ -1656,9 +1661,9 @@
|
|||
//#define LIN_ADVANCE
|
||||
#if ENABLED(LIN_ADVANCE)
|
||||
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
|
||||
#define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
|
||||
#define LIN_ADVANCE_K 0 //0.22 // Unit: mm compression per 1mm/s extruder speed
|
||||
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
|
||||
//#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
|
||||
#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
|
||||
#endif
|
||||
|
||||
// @section leveling
|
||||
|
|
@ -1833,7 +1838,7 @@
|
|||
#endif
|
||||
|
||||
// Moves (or segments) with fewer steps than this will be joined with the next move
|
||||
#define MIN_STEPS_PER_SEGMENT 6
|
||||
#define MIN_STEPS_PER_SEGMENT 1
|
||||
|
||||
/**
|
||||
* Minimum delay before and after setting the stepper DIR (in ns)
|
||||
|
|
@ -1894,16 +1899,16 @@
|
|||
#if BOTH(SDSUPPORT, DIRECT_STEPPING)
|
||||
#define BLOCK_BUFFER_SIZE 8
|
||||
#elif ENABLED(SDSUPPORT)
|
||||
#define BLOCK_BUFFER_SIZE 16
|
||||
#define BLOCK_BUFFER_SIZE 16 //OPT 32
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16
|
||||
#define BLOCK_BUFFER_SIZE 16 //OPT 32
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
// The ASCII buffer for serial input
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define BUFSIZE 4 //32
|
||||
|
||||
// Transmission to Host Buffer Size
|
||||
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
|
||||
|
|
@ -1912,7 +1917,7 @@
|
|||
// For debug-echo: 128 bytes for the optimal speed.
|
||||
// Other output doesn't need to be that speedy.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define TX_BUFFER_SIZE 0 //32
|
||||
|
||||
// Host Receive Buffer Size
|
||||
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
|
||||
|
|
@ -2090,28 +2095,28 @@
|
|||
* Requires NOZZLE_PARK_FEATURE.
|
||||
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 800 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 700 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
|
@ -2128,10 +2133,10 @@
|
|||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
|
|
@ -2267,9 +2272,9 @@
|
|||
#define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
|
||||
|
||||
#if AXIS_IS_TMC(X)
|
||||
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT 650 //800// (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
|
||||
#define X_MICROSTEPS 16 // 0..256
|
||||
#define X_MICROSTEPS 16 //32 // 0..256
|
||||
#define X_RSENSE 0.11
|
||||
#define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
|
||||
#endif
|
||||
|
|
@ -2283,9 +2288,9 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Y)
|
||||
#define Y_CURRENT 800
|
||||
#define Y_CURRENT 650 //800
|
||||
#define Y_CURRENT_HOME Y_CURRENT
|
||||
#define Y_MICROSTEPS 16
|
||||
#define Y_MICROSTEPS 16 //32
|
||||
#define Y_RSENSE 0.11
|
||||
#define Y_CHAIN_POS -1
|
||||
#endif
|
||||
|
|
@ -2299,9 +2304,9 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(Z)
|
||||
#define Z_CURRENT 800
|
||||
#define Z_CURRENT 650 //800
|
||||
#define Z_CURRENT_HOME Z_CURRENT
|
||||
#define Z_MICROSTEPS 16
|
||||
#define Z_MICROSTEPS 16 //32
|
||||
#define Z_RSENSE 0.11
|
||||
#define Z_CHAIN_POS -1
|
||||
#endif
|
||||
|
|
@ -2331,8 +2336,8 @@
|
|||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_MICROSTEPS 16
|
||||
#define E0_CURRENT 650 //800
|
||||
#define E0_MICROSTEPS 16 //32
|
||||
#define E0_RSENSE 0.11
|
||||
#define E0_CHAIN_POS -1
|
||||
#endif
|
||||
|
|
@ -2477,7 +2482,7 @@
|
|||
* Define you own with
|
||||
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
|
||||
*/
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_12V
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_24V //TMC Have set this to 24V mode
|
||||
|
||||
/**
|
||||
* Monitor Trinamic drivers
|
||||
|
|
@ -2490,7 +2495,7 @@
|
|||
* M912 - Clear stepper driver overtemperature pre-warn condition flag.
|
||||
* M122 - Report driver parameters (Requires TMC_DEBUG)
|
||||
*/
|
||||
//#define MONITOR_DRIVER_STATUS
|
||||
#define MONITOR_DRIVER_STATUS //TMC
|
||||
|
||||
#if ENABLED(MONITOR_DRIVER_STATUS)
|
||||
#define CURRENT_STEP_DOWN 50 // [mA]
|
||||
|
|
@ -2505,13 +2510,13 @@
|
|||
* STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
|
||||
* M913 X/Y/Z/E to live tune the setting
|
||||
*/
|
||||
//#define HYBRID_THRESHOLD
|
||||
#define HYBRID_THRESHOLD //TMC
|
||||
|
||||
#define X_HYBRID_THRESHOLD 100 // [mm/s]
|
||||
#define X2_HYBRID_THRESHOLD 100
|
||||
#define Y_HYBRID_THRESHOLD 100
|
||||
#define Y2_HYBRID_THRESHOLD 100
|
||||
#define Z_HYBRID_THRESHOLD 3
|
||||
#define Z_HYBRID_THRESHOLD 100
|
||||
#define Z2_HYBRID_THRESHOLD 3
|
||||
#define Z3_HYBRID_THRESHOLD 3
|
||||
#define Z4_HYBRID_THRESHOLD 3
|
||||
|
|
@ -2587,7 +2592,7 @@
|
|||
* Enable M122 debugging command for TMC stepper drivers.
|
||||
* M122 S0/1 will enable continous reporting.
|
||||
*/
|
||||
//#define TMC_DEBUG
|
||||
#define TMC_DEBUG //TMC
|
||||
|
||||
/**
|
||||
* You can set your own advanced settings by filling in predefined functions.
|
||||
|
|
@ -3264,7 +3269,9 @@
|
|||
* Host Prompt Support enables Marlin to use the host for user prompts so
|
||||
* filament runout and other processes can be managed from the host side.
|
||||
*/
|
||||
//#define HOST_ACTION_COMMANDS
|
||||
#if EITHER(QQS, QQS_TMC) //with module ESP12
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#endif
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
//#define HOST_PROMPT_SUPPORT
|
||||
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
|
||||
|
|
@ -3427,13 +3434,15 @@
|
|||
/**
|
||||
* WiFi Support (Espressif ESP32 WiFi)
|
||||
*/
|
||||
//#if EITHER(QQS, QQS_TMC) //No test
|
||||
//#define WIFISUPPORT // Marlin embedded WiFi managenent
|
||||
//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
|
||||
//#endif
|
||||
|
||||
#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
|
||||
//#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
|
||||
//#define OTASUPPORT // Support over-the-air firmware updates
|
||||
//#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
|
||||
#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
|
||||
#define OTASUPPORT // Support over-the-air firmware updates
|
||||
#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
|
||||
|
||||
/**
|
||||
* To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
|
||||
|
|
@ -3443,7 +3452,7 @@
|
|||
* #define WIFI_SSID "WiFi SSID"
|
||||
* #define WIFI_PWD "WiFi Password"
|
||||
*/
|
||||
//#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#include "Configuration_Secure.h" // External file with WiFi SSID / Password
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
/**
|
||||
* Marlin release version identifier
|
||||
*/
|
||||
//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
|
||||
#define SHORT_BUILD_VERSION "bugfix-2.0.x"
|
||||
|
||||
/**
|
||||
* Verbose version identifier which should contain a reference to the location
|
||||
|
|
@ -41,12 +41,12 @@
|
|||
* here we define this default string as the date where the latest release
|
||||
* version was tagged.
|
||||
*/
|
||||
//#define STRING_DISTRIBUTION_DATE "2019-07-10"
|
||||
#define STRING_DISTRIBUTION_DATE "2020-08-12"
|
||||
|
||||
/**
|
||||
* Defines a generic printer name to be output to the LCD after booting Marlin.
|
||||
*/
|
||||
//#define MACHINE_NAME "3D Printer"
|
||||
#define MACHINE_NAME "QQ-S_Pro"
|
||||
|
||||
/**
|
||||
* The SOURCE_CODE_URL is the location where users will find the Marlin Source
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue