diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 5eb56dcfd5..c1aaeb4b14 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index dad62f7002..ff27fb9a2c 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index 05c9befe62..f2644b7ff0 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index f610717e49..9be30ed4ab 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index 03decf76fa..a7742ab970 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index f610717e49..9be30ed4ab 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 4f1084c5d6..3274529e69 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h index 25e631d22b..8111207664 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -1379,13 +1379,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 903ea8d099..e160214ba8 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h index e6ff3e506f..18589d399f 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index 4a0ae9b124..7129862d11 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -1376,13 +1376,20 @@ //#define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index d5685033ad..2aca91b104 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h index 49dffb3763..e5bd595c94 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h @@ -1377,13 +1377,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index c1d49a5b98..a24e545760 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 791f8cefb9..845b16e512 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index a447bfa491..7c755597f7 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -1343,13 +1343,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index a15ee44398..1e75c2200d 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index e8e25031a5..677c8bf06f 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -1387,13 +1387,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index 06517f43ee..89f7f6fefd 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h index a9383c7ded..1c5cc06ad0 100644 --- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h @@ -1378,13 +1378,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 910c4b740b..1ba8825da2 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1378,13 +1378,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index a2c7a02429..91ff478da0 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1378,13 +1378,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index a2c7a02429..91ff478da0 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -1378,13 +1378,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index a2c7a02429..91ff478da0 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -1378,13 +1378,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 0ed880e239..297c3b658a 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -1383,13 +1383,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index e2bc53b0c1..c5df70e4a9 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -1378,13 +1378,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index 5c1f232d93..e94c72b1e1 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 51704a8c72..f4409c9ee2 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 1c035e7c98..5ce2615873 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -1376,13 +1376,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index 6a394e9bb3..33c3ebb02e 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -1366,13 +1366,20 @@ #define EXTENDED_CAPABILITIES_REPORT /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. + * Disable all Volumetric extrusion options */ -//#define VOLUMETRIC_DEFAULT_ON +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif /** * Enable this option for a leaner build of Marlin that removes all