3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

settings for white printrbot with a retro-fitted Bigtreetech SKR v1.3

Browse source
This commit is contained in:
Philip Stark 2020-11-13 14:54:32 +01:00
parent ba2939b1dc
commit de9fec0652
3 changed files with 46 additions and 45 deletions
Download patch file Download diff file Expand all files Collapse all files

83
Marlin/Configuration.h
View file

@ -70,7 +70,7 @@
// @section info // @section info
// Author info of this build printed to the host during boot and M115 // Author info of this build printed to the host during boot and M115
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. #define STRING_CONFIG_H_AUTHOR "(hellerbarde, 2020-11-13-v1)" // Who made the changes.
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
/** /**
@ -85,7 +85,7 @@
*/ */
// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
#define SHOW_BOOTSCREEN // #define SHOW_BOOTSCREEN
// Show the bitmap in Marlin/_Bootscreen.h on startup. // Show the bitmap in Marlin/_Bootscreen.h on startup.
//#define SHOW_CUSTOM_BOOTSCREEN //#define SHOW_CUSTOM_BOOTSCREEN
@ -103,13 +103,13 @@
* *
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7] * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/ */
#define SERIAL_PORT 0 #define SERIAL_PORT -1
/** /**
* Select a secondary serial port on the board to use for communication with the host. * Select a secondary serial port on the board to use for communication with the host.
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7] * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/ */
//#define SERIAL_PORT_2 -1 #define SERIAL_PORT_2 0
/** /**
* This setting determines the communication speed of the printer. * This setting determines the communication speed of the printer.
@ -127,7 +127,7 @@
// Choose the name from boards.h that matches your setup // Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_RAMPS_14_EFB #define MOTHERBOARD BOARD_BTT_SKR_V1_3
#endif #endif
// Name displayed in the LCD "Ready" message and Info menu // Name displayed in the LCD "Ready" message and Info menu
@ -423,7 +423,7 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_6 0 #define TEMP_SENSOR_6 0
#define TEMP_SENSOR_7 0 #define TEMP_SENSOR_7 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_PROBE 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
@ -621,10 +621,10 @@
// Almost all printers will be using one per axis. Probes will use one or more of the // Almost all printers will be using one per axis. Probes will use one or more of the
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
#define USE_XMIN_PLUG #define USE_XMIN_PLUG
#define USE_YMIN_PLUG //#define USE_YMIN_PLUG
#define USE_ZMIN_PLUG #define USE_ZMIN_PLUG
//#define USE_XMAX_PLUG //#define USE_XMAX_PLUG
//#define USE_YMAX_PLUG #define USE_YMAX_PLUG
//#define USE_ZMAX_PLUG //#define USE_ZMAX_PLUG
// Enable pullup for all endstops to prevent a floating state // Enable pullup for all endstops to prevent a floating state
@ -656,11 +656,11 @@
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
/** /**
* Stepper Drivers * Stepper Drivers
@ -741,14 +741,14 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2...]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2000, 94 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2...]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 15, 40 }
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING) #if ENABLED(LIMITED_MAX_FR_EDITING)
@ -844,7 +844,7 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing // Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING #define USE_PROBE_FOR_Z_HOMING
/** /**
* Z_MIN_PROBE_PIN * Z_MIN_PROBE_PIN
@ -882,7 +882,7 @@
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
* (e.g., an inductive probe or a nozzle-based probe-switch.) * (e.g., an inductive probe or a nozzle-based probe-switch.)
*/ */
//#define FIX_MOUNTED_PROBE #define FIX_MOUNTED_PROBE
/** /**
* Use the nozzle as the probe, as with a conductive * Use the nozzle as the probe, as with a conductive
@ -986,11 +986,11 @@
* | [-] | * | [-] |
* O-- FRONT --+ * O-- FRONT --+
*/ */
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } #define NOZZLE_TO_PROBE_OFFSET { 21, 3, 0 }
// Most probes should stay away from the edges of the bed, but // Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 10 #define PROBING_MARGIN 5
// X and Y axis travel speed (mm/min) between probes // X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_SPEED (133*60) #define XY_PROBE_SPEED (133*60)
@ -999,7 +999,8 @@
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
// Feedrate (mm/min) for the "accurate" probe of each point // Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 1)
// #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
/** /**
* Multiple Probing * Multiple Probing
@ -1010,8 +1011,8 @@
* A total of 2 does fast/slow probes with a weighted average. * A total of 2 does fast/slow probes with a weighted average.
* A total of 3 or more adds more slow probes, taking the average. * A total of 3 or more adds more slow probes, taking the average.
*/ */
//#define MULTIPLE_PROBING 2 #define MULTIPLE_PROBING 4
//#define EXTRA_PROBING 1 #define EXTRA_PROBING 1
/** /**
* Z probes require clearance when deploying, stowing, and moving between * Z probes require clearance when deploying, stowing, and moving between
@ -1028,11 +1029,11 @@
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done //#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -1 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MIN -20
@ -1086,9 +1087,9 @@
// @section machine // @section machine
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false #define INVERT_X_DIR true
#define INVERT_Y_DIR true #define INVERT_Y_DIR true
#define INVERT_Z_DIR false #define INVERT_Z_DIR true
// @section extruder // @section extruder
@ -1104,26 +1105,26 @@
// @section homing // @section homing
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed #define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... #define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z #define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
// Direction of endstops when homing; 1=MAX, -1=MIN // Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1] // :[-1,1]
#define X_HOME_DIR -1 #define X_HOME_DIR -1
#define Y_HOME_DIR -1 #define Y_HOME_DIR 1
#define Z_HOME_DIR -1 #define Z_HOME_DIR -1
// @section machine // @section machine
// The size of the print bed // The size of the print bed
#define X_BED_SIZE 200 #define X_BED_SIZE 100
#define Y_BED_SIZE 200 #define Y_BED_SIZE 100
// Travel limits (mm) after homing, corresponding to endstop positions. // Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
@ -1235,14 +1236,14 @@
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL #define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
/** /**
* Normally G28 leaves leveling disabled on completion. Enable * Normally G28 leaves leveling disabled on completion. Enable
* this option to have G28 restore the prior leveling state. * this option to have G28 restore the prior leveling state.
*/ */
//#define RESTORE_LEVELING_AFTER_G28 #define RESTORE_LEVELING_AFTER_G28
/** /**
* Enable detailed logging of G28, G29, M48, etc. * Enable detailed logging of G28, G29, M48, etc.
@ -1385,7 +1386,7 @@
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing.
// - Prevent Z homing when the Z probe is outside bed area. // - Prevent Z homing when the Z probe is outside bed area.
// //
//#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
@ -1394,7 +1395,7 @@
// Homing speeds (mm/min) // Homing speeds (mm/min)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (50*60)
#define HOMING_FEEDRATE_Z (4*60) #define HOMING_FEEDRATE_Z (12*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS #define VALIDATE_HOMING_ENDSTOPS
@ -1471,12 +1472,12 @@
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
*/ */
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 #define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
#endif #endif
// //
@ -1503,13 +1504,13 @@
// Preheat Constants // Preheat Constants
#define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_HOTEND 210
#define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_BED 60
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_LABEL "PET"
#define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_HOTEND 250
#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_BED 80
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
/** /**

6
Marlin/Configuration_adv.h
View file

@ -653,10 +653,10 @@
//#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing
#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_MM { 2, 2, 0.6 } // (mm) Backoff from endstops after first bump
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 2, 2, 2 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing #define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
//#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define QUICK_HOME // If G28 contains XY do a diagonal move first
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X

2
platformio.ini
View file

@ -18,7 +18,7 @@
[platformio] [platformio]
src_dir = Marlin src_dir = Marlin
boards_dir = buildroot/share/PlatformIO/boards boards_dir = buildroot/share/PlatformIO/boards
default_envs = mega2560 default_envs = LPC1768
include_dir = Marlin include_dir = Marlin
# #