From c4877d601fa85d15a2a52a320094ae90d3c0eff0 Mon Sep 17 00:00:00 2001 From: Foxies Date: Mon, 19 Oct 2020 01:49:31 +0200 Subject: [PATCH] Update Configuration.h --- Marlin/Configuration.h | 392 ++++++++++++----------------------------- 1 file changed, 116 insertions(+), 276 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 2f4b2f040e..1f6b0db946 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -21,8 +21,6 @@ */ #pragma once -#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQS-Pro" - /** * Configuration.h * @@ -70,8 +68,9 @@ // // @section info + // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Foxies-CSTL, QQS-Pro)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -86,8 +85,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -//#define SHOW_BOOTSCREEN - +#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -105,14 +103,13 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 3 +#define SERIAL_PORT 0 /** * Select a secondary serial port on the board to use for communication with the host. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT_2 1 -#define NUM_SERIAL 2 +//#define SERIAL_PORT_2 -1 /** * This setting determines the communication speed of the printer. @@ -130,11 +127,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FLSUN_HISPEED + #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "FLSUN QQS-Pro" +//#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -426,7 +423,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 @@ -476,7 +473,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 120 +#define BED_MAXTEMP 150 //=========================================================================== //============================= PID Settings ================================ @@ -490,28 +487,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 28.16, 28.16 } - #define DEFAULT_Ki_LIST { 3.38, 3.38 } - #define DEFAULT_Kd_LIST { 58.69, 58.69 } + #define DEFAULT_Kp_LIST { 22.20, 22.20 } + #define DEFAULT_Ki_LIST { 1.08, 1.08 } + #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - //#define DEFAULT_Kp 28.16 - //#define DEFAULT_Ki 3.38 - //#define DEFAULT_Kd 58.69 - // (measured after M106 S180 with M303 E0 S230 C8) Memo: M301 P23.24 I1.87 D72.35 (sonde11) - // FLSUN QQ-S, PET 235 C with 70% part cooling - //M301 P21.67 I1.25 D93.81 PLA - //M301 P21.6708 I1.2515 D93.8127 PET - #define DEFAULT_Kp 21.6708 - #define DEFAULT_Ki 1.2515 - #define DEFAULT_Kd 93.8127 + #define DEFAULT_Kp 22.20 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114.00 #endif #endif // PIDTEMP @@ -532,7 +522,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -#define PIDTEMPBED +//#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -550,21 +540,11 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - // FLSUN QQ-S stock 1.6mm aluminium heater with 4mm lattice glass - //#define DEFAULT_bedKp 325.10 - //#define DEFAULT_bedKi 63.35 - //#define DEFAULT_bedKd 417.10 + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - //M303 E-1 C8 S80 =>MEMO M304 P97.282 I18.961 D332.738 - #define DEFAULT_bedKp 73.94 - #define DEFAULT_bedKi 14.41 - #define DEFAULT_bedKd 252.92 - #endif // PIDTEMPBED #if EITHER(PIDTEMP, PIDTEMPBED) @@ -592,7 +572,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 950 +#define EXTRUDE_MAXLENGTH 200 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -631,67 +611,6 @@ //#define COREZY //#define MARKFORGED_XY // MarkForged. See https://reprap.org/forum/read.php?152,504042 -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - #define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 5 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 130.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 280.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 360.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 140.8 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - #define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - //=========================================================================== //============================== Endstop Settings =========================== //=========================================================================== @@ -701,12 +620,12 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -737,11 +656,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -759,15 +678,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE TMC2208_STANDALONE -#define Y_DRIVER_TYPE TMC2208_STANDALONE -#define Z_DRIVER_TYPE TMC2208_STANDALONE +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -802,7 +721,6 @@ //============================================================================= // @section motion -// delta speeds must be the same on xyz /** * Default Settings * @@ -823,22 +741,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 397 } // default steps per unit +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 250, 250, 250, 200 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -851,7 +761,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -866,9 +776,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 250 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -878,17 +788,17 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define CLASSIC_JERK +//#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 20, 10 } // ...or, set your own edit limits + #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits #endif #endif @@ -915,7 +825,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -#define S_CURVE_ACCELERATION +//#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -972,7 +882,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -#define FIX_MOUNTED_PROBE +//#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1042,44 +952,9 @@ */ //#define SENSORLESS_PROBING -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - // Kossel Mini - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 30 - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - // Move the nozzle down further to push the probe into retracted position. - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - //#define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - // Raise things back up slightly so we don't bump into anything - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED)/2 - //#define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - //#define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// /** * Nozzle-to-Probe offsets { X, Y, Z } @@ -1111,20 +986,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 20 +#define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_SPEED (84*60) +#define XY_PROBE_SPEED (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) /** * Multiple Probing @@ -1135,8 +1010,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -#define MULTIPLE_PROBING 2 -#define EXTRA_PROBING 1 +//#define MULTIPLE_PROBING 2 +//#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1152,22 +1027,22 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 30 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 50 // Z position after probing is done +//#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -30 -#define Z_PROBE_OFFSET_RANGE_MAX 30 +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST +//#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation -#define PAUSE_BEFORE_DEPLOY_STOW +//#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe #endif @@ -1185,7 +1060,7 @@ #endif //#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } @@ -1211,14 +1086,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true +#define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR true +#define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true //extruder TITAN +#define INVERT_E0_DIR false #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1233,30 +1108,30 @@ //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. -//#define Z_HOMING_HEIGHT 4 //act (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 // @section machine // The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define X_MIN_POS 0 +#define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 /** * Software Endstops @@ -1294,7 +1169,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -#define FILAMENT_RUNOUT_SENSOR +//#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1309,7 +1184,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - #define FILAMENT_RUNOUT_DISTANCE_MM 25 + //#define FILAMENT_RUNOUT_DISTANCE_MM 25 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1360,14 +1235,14 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL +//#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable * this option to have G28 restore the prior leveling state. */ -#define RESTORE_LEVELING_AFTER_G28 //for UBL +//#define RESTORE_LEVELING_AFTER_G28 /** * Enable detailed logging of G28, G29, M48, etc. @@ -1406,8 +1281,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 7 + #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1439,8 +1313,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 3 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 11 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle @@ -1489,18 +1363,18 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -#define Z_PROBE_END_SCRIPT "G28" +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // @section homing // The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 +//#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. //#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing +//#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1518,9 +1392,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -//#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (100*60) +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1597,12 +1471,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // OPT Init EEPROM automatically on any errors. + //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1611,8 +1485,8 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1629,25 +1503,15 @@ // Preheat Constants #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 210 -#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "TPU" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 50 +#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_3_LABEL "PETG" -#define PREHEAT_3_TEMP_HOTEND 240 -#define PREHEAT_3_TEMP_BED 60 -#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_4_LABEL "ABS" -#define PREHEAT_4_TEMP_HOTEND 250 -#define PREHEAT_4_TEMP_BED 100 -#define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255 - /** * Nozzle Park * @@ -1659,11 +1523,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -#define NOZZLE_PARK_FEATURE +//#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 0, (Y_MAX_POS - 10), 100 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1709,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 WESTERN +#define DISPLAY_CHARSET_HD44780 JAPANESE /** * Info Screen Style (0:Classic, 1:Průša) @@ -1860,7 +1724,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -#define SDSUPPORT +//#define SDSUPPORT /** * SD CARD: SPI SPEED @@ -2361,7 +2225,7 @@ // 320x240, 2.8", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -#define MKS_ROBIN_TFT28 +//#define MKS_ROBIN_TFT28 // // 320x240, 3.2", FSMC Display From MKS @@ -2430,7 +2294,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -#define TFT_COLOR_UI +//#define TFT_COLOR_UI //#define TFT_LVGL_UI /** @@ -2455,41 +2319,17 @@ // // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // -#define TOUCH_SCREEN - #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus +//#define TOUCH_SCREEN +#if ENABLED(TOUCH_SCREEN) + #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus -// #define TOUCH_SCREEN_CALIBRATION + #define TOUCH_SCREEN_CALIBRATION //#define XPT2046_X_CALIBRATION 12316 //#define XPT2046_Y_CALIBRATION -8981 //#define XPT2046_X_OFFSET -43 //#define XPT2046_Y_OFFSET 257 - - // Define in pins QQS-Pro (M995) - //#define XPT2046_X_CALIBRATION 12218 - //#define XPT2046_Y_CALIBRATION -8814 - //#define XPT2046_X_OFFSET -34 - //#define XPT2046_Y_OFFSET 256 - - /* MKS Robin TFT v2.0 */ - //#define XPT2046_X_CALIBRATION 12013 - //#define XPT2046_Y_CALIBRATION -8711 - //#define XPT2046_X_OFFSET -32 - //#define XPT2046_Y_OFFSET 256 - - /* MKS Robin TFT v1.1 with ILI9328 */ - //#define XPT2046_X_CALIBRATION -11792 - //#define XPT2046_Y_CALIBRATION 8947 - //#define XPT2046_X_OFFSET 342 - //#define XPT2046_Y_OFFSET -19 - - /* MKS Robin TFT v1.1 with R61505 */ - //#define XPT2046_X_CALIBRATION 12489 - //#define XPT2046_Y_CALIBRATION 9210 - //#define XPT2046_X_OFFSET -52 - //#define XPT2046_Y_OFFSET -17 #endif // @@ -2515,14 +2355,14 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM +//#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. // However, control resolution will be halved for each increment; // at zero value, there are 128 effective control positions. // :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 1 +#define SOFT_PWM_SCALE 0 // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can // be used to mitigate the associated resolution loss. If enabled, @@ -2581,14 +2421,14 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN LED_PWM // LED driving pin + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 12 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE