diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index ee6223ab39..2ff73a28ab 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -3210,15 +3210,35 @@
 
   #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
   #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+  //#define USER_GCODE_PIN_2 -1         // PIN assigned to trigger USER_GCODE_2 execution
+  #ifdef USER_GCODE_PIN_2
+    #define USER_GCODE_PIN_INIT_2       // Init the PIN state at reboot
+    #define USER_GCODE_PIN_STATE_2 LOW  // What state should trigger USER_GCODE_2 execution (LOW or HIGH)
+  #endif
 
   #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
   #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+  //#define USER_GCODE_PIN_3 -1         // PIN assigned to trigger USER_GCODE_3 execution
+  #ifdef USER_GCODE_PIN_3
+    #define USER_GCODE_PIN_INIT_3       // Init the PIN state at reboot
+    #define USER_GCODE_PIN_STATE_3 LOW  // What state should trigger USER_GCODE_3 execution (LOW or HIGH)
+  #endif
 
   #define USER_DESC_4 "Heat Bed/Home/Level"
   #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
+  //#define USER_GCODE_PIN_4 -1         // PIN assigned to trigger USER_GCODE_4 execution
+  #ifdef USER_GCODE_PIN_4
+    #define USER_GCODE_PIN_INIT_4       // Init the PIN state at reboot
+    #define USER_GCODE_PIN_STATE_4 LOW  // What state should trigger USER_GCODE_4 execution (LOW or HIGH)
+  #endif
 
   #define USER_DESC_5 "Home & Info"
   #define USER_GCODE_5 "G28\nM503"
+  //#define USER_GCODE_PIN_5 -1         // PIN assigned to trigger USER_GCODE_5 execution
+  #ifdef USER_GCODE_PIN_5
+    #define USER_GCODE_PIN_INIT_5       // Init the PIN state at reboot
+    #define USER_GCODE_PIN_STATE_5 LOW  // What state should trigger USER_GCODE_5 execution (LOW or HIGH)
+  #endif
 #endif
 
 /**