Add HAS_HEATED_BED conditional (#10494)
This commit is contained in:
Scott Lahteine
GitHub
parent
6b50a50676
commit
b19d8182c1
12 changed files with 304 additions and 264 deletions
|
|
@ -62,7 +62,7 @@ Temperature thermalManager;
|
|||
* Macros to include the heater id in temp errors. The compiler's dead-code
|
||||
* elimination should (hopefully) optimize out the unused strings.
|
||||
*/
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
#define TEMP_ERR_PSTR(MSG, E) \
|
||||
(E) == -1 ? PSTR(MSG ## _BED) : \
|
||||
(HOTENDS > 1 && (E) == 1) ? PSTR(MSG_E2 " " MSG) : \
|
||||
|
|
@ -81,21 +81,51 @@ Temperature thermalManager;
|
|||
|
||||
// public:
|
||||
|
||||
float Temperature::current_temperature[HOTENDS] = { 0.0 },
|
||||
Temperature::current_temperature_chamber = 0.0,
|
||||
Temperature::current_temperature_bed = 0.0;
|
||||
|
||||
float Temperature::current_temperature[HOTENDS] = { 0.0 };
|
||||
int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
|
||||
Temperature::target_temperature[HOTENDS] = { 0 },
|
||||
Temperature::current_temperature_chamber_raw = 0,
|
||||
Temperature::current_temperature_bed_raw = 0;
|
||||
Temperature::target_temperature[HOTENDS] = { 0 };
|
||||
|
||||
#if ENABLED(AUTO_POWER_E_FANS)
|
||||
int16_t Temperature::autofan_speed[HOTENDS] = { 0 };
|
||||
#endif
|
||||
|
||||
#if HAS_HEATER_BED
|
||||
int16_t Temperature::target_temperature_bed = 0;
|
||||
#if HAS_HEATED_BED
|
||||
float Temperature::current_temperature_bed = 0.0;
|
||||
int16_t Temperature::current_temperature_bed_raw = 0,
|
||||
Temperature::target_temperature_bed = 0;
|
||||
uint8_t Temperature::soft_pwm_amount_bed;
|
||||
#ifdef BED_MINTEMP
|
||||
int16_t Temperature::bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
|
||||
#endif
|
||||
#ifdef BED_MAXTEMP
|
||||
int16_t Temperature::bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
|
||||
#endif
|
||||
#if WATCH_THE_BED
|
||||
uint16_t Temperature::watch_target_bed_temp = 0;
|
||||
millis_t Temperature::watch_bed_next_ms = 0;
|
||||
#endif
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
float Temperature::bedKp, Temperature::bedKi, Temperature::bedKd, // Initialized by settings.load()
|
||||
Temperature::temp_iState_bed = { 0 },
|
||||
Temperature::temp_dState_bed = { 0 },
|
||||
Temperature::pTerm_bed,
|
||||
Temperature::iTerm_bed,
|
||||
Temperature::dTerm_bed,
|
||||
Temperature::pid_error_bed;
|
||||
#else
|
||||
millis_t Temperature::next_bed_check_ms;
|
||||
#endif
|
||||
uint16_t Temperature::raw_temp_bed_value = 0;
|
||||
#if HEATER_IDLE_HANDLER
|
||||
millis_t Temperature::bed_idle_timeout_ms = 0;
|
||||
bool Temperature::bed_idle_timeout_exceeded = false;
|
||||
#endif
|
||||
#endif // HAS_HEATED_BED
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
float Temperature::current_temperature_chamber = 0.0;
|
||||
int16_t Temperature::current_temperature_chamber_raw = 0;
|
||||
uint16_t Temperature::raw_temp_chamber_value = 0;
|
||||
#endif
|
||||
|
||||
// Initialized by settings.load()
|
||||
|
|
@ -113,11 +143,6 @@ int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
|
|||
#endif
|
||||
#endif
|
||||
|
||||
// Initialized by settings.load()
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
float Temperature::bedKp, Temperature::bedKi, Temperature::bedKd;
|
||||
#endif
|
||||
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
volatile int Temperature::babystepsTodo[XYZ] = { 0 };
|
||||
#endif
|
||||
|
|
@ -127,18 +152,11 @@ int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
|
|||
millis_t Temperature::watch_heater_next_ms[HOTENDS] = { 0 };
|
||||
#endif
|
||||
|
||||
#if WATCH_THE_BED
|
||||
uint16_t Temperature::watch_target_bed_temp = 0;
|
||||
millis_t Temperature::watch_bed_next_ms = 0;
|
||||
#endif
|
||||
|
||||
#if ENABLED(PREVENT_COLD_EXTRUSION)
|
||||
bool Temperature::allow_cold_extrude = false;
|
||||
int16_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP;
|
||||
#endif
|
||||
|
||||
// private:
|
||||
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
uint16_t Temperature::redundant_temperature_raw = 0;
|
||||
float Temperature::redundant_temperature = 0.0;
|
||||
|
|
@ -164,20 +182,7 @@ volatile bool Temperature::temp_meas_ready = false;
|
|||
bool Temperature::pid_reset[HOTENDS];
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
float Temperature::temp_iState_bed = { 0 },
|
||||
Temperature::temp_dState_bed = { 0 },
|
||||
Temperature::pTerm_bed,
|
||||
Temperature::iTerm_bed,
|
||||
Temperature::dTerm_bed,
|
||||
Temperature::pid_error_bed;
|
||||
#else
|
||||
millis_t Temperature::next_bed_check_ms;
|
||||
#endif
|
||||
|
||||
uint16_t Temperature::raw_temp_value[MAX_EXTRUDERS] = { 0 },
|
||||
Temperature::raw_temp_chamber_value = 0,
|
||||
Temperature::raw_temp_bed_value = 0;
|
||||
uint16_t Temperature::raw_temp_value[MAX_EXTRUDERS] = { 0 };
|
||||
|
||||
// Init min and max temp with extreme values to prevent false errors during startup
|
||||
int16_t Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP, HEATER_4_RAW_LO_TEMP),
|
||||
|
|
@ -193,14 +198,6 @@ int16_t Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TE
|
|||
millis_t Temperature::preheat_end_time[HOTENDS] = { 0 };
|
||||
#endif
|
||||
|
||||
#ifdef BED_MINTEMP
|
||||
int16_t Temperature::bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
|
||||
#endif
|
||||
|
||||
#ifdef BED_MAXTEMP
|
||||
int16_t Temperature::bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
|
||||
#endif
|
||||
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
int8_t Temperature::meas_shift_index; // Index of a delayed sample in buffer
|
||||
#endif
|
||||
|
|
@ -209,8 +206,7 @@ int16_t Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TE
|
|||
millis_t Temperature::next_auto_fan_check_ms = 0;
|
||||
#endif
|
||||
|
||||
uint8_t Temperature::soft_pwm_amount[HOTENDS],
|
||||
Temperature::soft_pwm_amount_bed;
|
||||
uint8_t Temperature::soft_pwm_amount[HOTENDS];
|
||||
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
uint8_t Temperature::soft_pwm_amount_fan[FAN_COUNT],
|
||||
|
|
@ -228,10 +224,6 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
|
|||
#if HEATER_IDLE_HANDLER
|
||||
millis_t Temperature::heater_idle_timeout_ms[HOTENDS] = { 0 };
|
||||
bool Temperature::heater_idle_timeout_exceeded[HOTENDS] = { false };
|
||||
#if HAS_TEMP_BED
|
||||
millis_t Temperature::bed_idle_timeout_ms = 0;
|
||||
bool Temperature::bed_idle_timeout_exceeded = false;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(ADC_KEYPAD)
|
||||
|
|
@ -541,8 +533,13 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
|
|||
|
||||
Temperature::Temperature() { }
|
||||
|
||||
int Temperature::getHeaterPower(int heater) {
|
||||
return heater < 0 ? soft_pwm_amount_bed : soft_pwm_amount[heater];
|
||||
int Temperature::getHeaterPower(const int heater) {
|
||||
return (
|
||||
#if HAS_HEATED_BED
|
||||
heater < 0 ? soft_pwm_amount_bed :
|
||||
#endif
|
||||
soft_pwm_amount[heater]
|
||||
);
|
||||
}
|
||||
|
||||
#if HAS_AUTO_FAN
|
||||
|
|
@ -841,29 +838,29 @@ void Temperature::manage_heater() {
|
|||
}
|
||||
#endif // FILAMENT_WIDTH_SENSOR
|
||||
|
||||
#if WATCH_THE_BED
|
||||
// Make sure temperature is increasing
|
||||
if (watch_bed_next_ms && ELAPSED(ms, watch_bed_next_ms)) { // Time to check the bed?
|
||||
if (degBed() < watch_target_bed_temp) // Failed to increase enough?
|
||||
_temp_error(-1, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, -1));
|
||||
else // Start again if the target is still far off
|
||||
start_watching_bed();
|
||||
}
|
||||
#endif // WATCH_THE_BED
|
||||
#if HAS_HEATED_BED
|
||||
|
||||
#if DISABLED(PIDTEMPBED)
|
||||
if (PENDING(ms, next_bed_check_ms)
|
||||
#if WATCH_THE_BED
|
||||
// Make sure temperature is increasing
|
||||
if (watch_bed_next_ms && ELAPSED(ms, watch_bed_next_ms)) { // Time to check the bed?
|
||||
if (degBed() < watch_target_bed_temp) // Failed to increase enough?
|
||||
_temp_error(-1, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, -1));
|
||||
else // Start again if the target is still far off
|
||||
start_watching_bed();
|
||||
}
|
||||
#endif // WATCH_THE_BED
|
||||
|
||||
#if DISABLED(PIDTEMPBED)
|
||||
if (PENDING(ms, next_bed_check_ms)
|
||||
#if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
|
||||
&& paused == last_pause_state
|
||||
#endif
|
||||
) return;
|
||||
next_bed_check_ms = ms + BED_CHECK_INTERVAL;
|
||||
#if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
|
||||
&& paused == last_pause_state
|
||||
last_pause_state = paused;
|
||||
#endif
|
||||
) return;
|
||||
next_bed_check_ms = ms + BED_CHECK_INTERVAL;
|
||||
#if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
|
||||
last_pause_state = paused;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
|
||||
#if HEATER_IDLE_HANDLER
|
||||
if (!bed_idle_timeout_exceeded && bed_idle_timeout_ms && ELAPSED(ms, bed_idle_timeout_ms))
|
||||
|
|
@ -904,7 +901,7 @@ void Temperature::manage_heater() {
|
|||
}
|
||||
#endif
|
||||
}
|
||||
#endif // HAS_TEMP_BED
|
||||
#endif // HAS_HEATED_BED
|
||||
}
|
||||
|
||||
#define PGM_RD_W(x) (short)pgm_read_word(&x)
|
||||
|
|
@ -952,7 +949,7 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
|
|||
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * (TEMP_SENSOR_AD595_GAIN)) + TEMP_SENSOR_AD595_OFFSET;
|
||||
}
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For bed temperature measurement.
|
||||
float Temperature::analog2tempBed(const int raw) {
|
||||
|
|
@ -986,7 +983,7 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
|
|||
|
||||
#endif
|
||||
}
|
||||
#endif // HAS_TEMP_BED
|
||||
#endif // HAS_HEATED_BED
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
|
|
@ -1036,7 +1033,7 @@ void Temperature::updateTemperaturesFromRawValues() {
|
|||
#endif
|
||||
HOTEND_LOOP()
|
||||
current_temperature[e] = Temperature::analog2temp(current_temperature_raw[e], e);
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
current_temperature_bed = Temperature::analog2tempBed(current_temperature_bed_raw);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
|
|
@ -1127,7 +1124,7 @@ void Temperature::init() {
|
|||
#if HAS_HEATER_4
|
||||
SET_OUTPUT(HEATER_3_PIN);
|
||||
#endif
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
SET_OUTPUT(HEATER_BED_PIN);
|
||||
#endif
|
||||
|
||||
|
|
@ -1192,7 +1189,7 @@ void Temperature::init() {
|
|||
#if HAS_TEMP_4
|
||||
ANALOG_SELECT(TEMP_4_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
ANALOG_SELECT(TEMP_BED_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
|
|
@ -1327,7 +1324,7 @@ void Temperature::init() {
|
|||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
#ifdef BED_MINTEMP
|
||||
while (analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
|
||||
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
|
||||
|
|
@ -1346,7 +1343,7 @@ void Temperature::init() {
|
|||
#endif
|
||||
}
|
||||
#endif // BED_MAXTEMP
|
||||
#endif // HAS_TEMP_BED
|
||||
#endif // HAS_HEATED_BED
|
||||
|
||||
#if ENABLED(PROBING_HEATERS_OFF)
|
||||
paused = false;
|
||||
|
|
@ -1463,7 +1460,7 @@ void Temperature::init() {
|
|||
#if HEATER_IDLE_HANDLER
|
||||
// If the heater idle timeout expires, restart
|
||||
if ((heater_id >= 0 && heater_idle_timeout_exceeded[heater_id])
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
|| (heater_id < 0 && bed_idle_timeout_exceeded)
|
||||
#endif
|
||||
) {
|
||||
|
|
@ -1509,7 +1506,10 @@ void Temperature::disable_all_heaters() {
|
|||
#endif
|
||||
|
||||
HOTEND_LOOP() setTargetHotend(0, e);
|
||||
setTargetBed(0);
|
||||
|
||||
#if HAS_HEATED_BED
|
||||
setTargetBed(0);
|
||||
#endif
|
||||
|
||||
// Unpause and reset everything
|
||||
#if ENABLED(PROBING_HEATERS_OFF)
|
||||
|
|
@ -1541,10 +1541,10 @@ void Temperature::disable_all_heaters() {
|
|||
#endif // HOTENDS > 1
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
target_temperature_bed = 0;
|
||||
soft_pwm_amount_bed = 0;
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
WRITE_HEATER_BED(LOW);
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -1557,13 +1557,13 @@ void Temperature::disable_all_heaters() {
|
|||
paused = p;
|
||||
if (p) {
|
||||
HOTEND_LOOP() start_heater_idle_timer(e, 0); // timeout immediately
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
start_bed_idle_timer(0); // timeout immediately
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
HOTEND_LOOP() reset_heater_idle_timer(e);
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
reset_bed_idle_timer();
|
||||
#endif
|
||||
}
|
||||
|
|
@ -1673,8 +1673,13 @@ void Temperature::set_current_temp_raw() {
|
|||
#endif
|
||||
#endif
|
||||
#endif
|
||||
current_temperature_bed_raw = raw_temp_bed_value;
|
||||
current_temperature_chamber_raw = raw_temp_chamber_value;
|
||||
|
||||
#if HAS_HEATED_BED
|
||||
current_temperature_bed_raw = raw_temp_bed_value;
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
current_temperature_chamber_raw = raw_temp_chamber_value;
|
||||
#endif
|
||||
temp_meas_ready = true;
|
||||
}
|
||||
|
||||
|
|
@ -1821,7 +1826,7 @@ void Temperature::isr() {
|
|||
#endif // HOTENDS > 3
|
||||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
ISR_STATICS(BED);
|
||||
#endif
|
||||
|
||||
|
|
@ -1862,7 +1867,7 @@ void Temperature::isr() {
|
|||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
soft_pwm_count_BED = (soft_pwm_count_BED & pwm_mask) + soft_pwm_amount_bed;
|
||||
WRITE_HEATER_BED(soft_pwm_count_BED > pwm_mask ? HIGH : LOW);
|
||||
#endif
|
||||
|
|
@ -1897,7 +1902,7 @@ void Temperature::isr() {
|
|||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
if (soft_pwm_count_BED <= pwm_count_tmp) WRITE_HEATER_BED(LOW);
|
||||
#endif
|
||||
|
||||
|
|
@ -1978,7 +1983,7 @@ void Temperature::isr() {
|
|||
#endif // HOTENDS > 3
|
||||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
_SLOW_PWM_ROUTINE(BED, soft_pwm_amount_bed); // BED
|
||||
#endif
|
||||
|
||||
|
|
@ -1997,7 +2002,7 @@ void Temperature::isr() {
|
|||
#endif // HOTENDS > 3
|
||||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
PWM_OFF_ROUTINE(BED); // BED
|
||||
#endif
|
||||
|
||||
|
|
@ -2057,7 +2062,7 @@ void Temperature::isr() {
|
|||
#endif // HOTENDS > 3
|
||||
#endif // HOTENDS > 2
|
||||
#endif // HOTENDS > 1
|
||||
#if HAS_HEATER_BED
|
||||
#if HAS_HEATED_BED
|
||||
if (state_timer_heater_BED > 0) state_timer_heater_BED--;
|
||||
#endif
|
||||
} // ((pwm_count >> SOFT_PWM_SCALE) & 0x3F) == 0
|
||||
|
|
@ -2113,7 +2118,7 @@ void Temperature::isr() {
|
|||
break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
case PrepareTemp_BED:
|
||||
START_ADC(TEMP_BED_PIN);
|
||||
break;
|
||||
|
|
@ -2216,8 +2221,14 @@ void Temperature::isr() {
|
|||
#endif
|
||||
|
||||
ZERO(raw_temp_value);
|
||||
raw_temp_bed_value = 0;
|
||||
raw_temp_chamber_value = 0;
|
||||
|
||||
#if HAS_HEATED_BED
|
||||
raw_temp_bed_value = 0;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
raw_temp_chamber_value = 0;
|
||||
#endif
|
||||
|
||||
#define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) > (HEATER_##N##_RAW_HI_TEMP) ? -1 : 1)
|
||||
|
||||
|
|
@ -2263,7 +2274,7 @@ void Temperature::isr() {
|
|||
#endif
|
||||
}
|
||||
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
#if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP
|
||||
#define GEBED <=
|
||||
#else
|
||||
|
|
@ -2331,15 +2342,15 @@ void Temperature::isr() {
|
|||
#endif
|
||||
const int8_t e=-3
|
||||
) {
|
||||
#if !(HAS_TEMP_BED && HAS_TEMP_HOTEND && HAS_TEMP_CHAMBER) && HOTENDS <= 1
|
||||
#if !(HAS_HEATED_BED && HAS_TEMP_HOTEND && HAS_TEMP_CHAMBER) && HOTENDS <= 1
|
||||
UNUSED(e);
|
||||
#endif
|
||||
|
||||
SERIAL_PROTOCOLCHAR(' ');
|
||||
SERIAL_PROTOCOLCHAR(
|
||||
#if HAS_TEMP_CHAMBER && HAS_TEMP_BED && HAS_TEMP_HOTEND
|
||||
#if HAS_TEMP_CHAMBER && HAS_HEATED_BED && HAS_TEMP_HOTEND
|
||||
e == -2 ? 'C' : e == -1 ? 'B' : 'T'
|
||||
#elif HAS_TEMP_BED && HAS_TEMP_HOTEND
|
||||
#elif HAS_HEATED_BED && HAS_TEMP_HOTEND
|
||||
e == -1 ? 'B' : 'T'
|
||||
#elif HAS_TEMP_HOTEND
|
||||
'T'
|
||||
|
|
@ -2370,7 +2381,7 @@ void Temperature::isr() {
|
|||
#endif
|
||||
);
|
||||
#endif
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
print_heater_state(degBed(), degTargetBed()
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
, rawBedTemp()
|
||||
|
|
@ -2396,7 +2407,7 @@ void Temperature::isr() {
|
|||
#endif
|
||||
SERIAL_PROTOCOLPGM(" @:");
|
||||
SERIAL_PROTOCOL(getHeaterPower(target_extruder));
|
||||
#if HAS_TEMP_BED
|
||||
#if HAS_HEATED_BED
|
||||
SERIAL_PROTOCOLPGM(" B@:");
|
||||
SERIAL_PROTOCOL(getHeaterPower(-1));
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue