3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Move FWRETRACT defaults to configuration_adv.h

Browse source
This commit is contained in:
whosawhatsis 2014-02-16 19:00:28 -08:00
parent 66e3869138
commit 99f0e44864
2 changed files with 14 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

10
Marlin/Configuration_adv.h
View file

@ -399,8 +399,14 @@ const unsigned int dropsegments=5; //everything with less than this number of st
// the moves are than replaced by the firmware controlled ones.
// #define FWRETRACT //ONLY PARTIALLY TESTED
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
#ifdef FWRETRACT
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
#define RETRACT_LENGTH 3 //default retract length (positive mm)
#define RETRACT_FEEDRATE 80*60 //default feedrate for retracting
#define RETRACT_ZLIFT 0 //default retract Z-lift
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
#define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction
#endif
//adds support for experimental filament exchange support M600; requires display
#ifdef ULTIPANEL