3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Fix up some things

Browse source
This commit is contained in:
Scott Lahteine 2020-11-11 18:29:30 -06:00
parent cddf64ad5e
commit 8f8df0204f
2 changed files with 32 additions and 31 deletions
Download patch file Download diff file Expand all files Collapse all files

56
Marlin/src/gcode/calibrate/G34_M422.cpp
View file

@ -50,27 +50,35 @@
/**
* G34: Z-Stepper automatic alignment
* Manual stepper lock controls:
* L Unlock all
* Z<1-4> Select Z stepper to act on
* S<state> Boolean value for lock state to set
*
* Example G34Z1S1;G34Z2S1;G34Z3S0 to unlock only the 3rd Z stepper
* Reset by G28
* Manual stepper lock controls (reset by G28):
* L Unlock all steppers
* Z<1-4> Z stepper to lock / unlock
* S<state> 0=UNLOCKED 1=LOCKED. If omitted, assume LOCKED.
*
* Examples:
* G34 Z1 ; Lock Z1
* G34 L Z2 ; Unlock all, then lock Z2
* G34 Z2 S0 ; Unlock Z2
*
* With Z_STEPPER_AUTO_ALIGN:
* I<iterations>
* T<accuracy>
* A<amplification> Provide an Amplification value
* I<iterations> Number of tests. If omitted, Z_STEPPER_ALIGN_ITERATIONS.
* T<accuracy> Target Accuracy factor. If omitted, Z_STEPPER_ALIGN_ACC.
* A<amplification> Provide an Amplification value. If omitted, Z_STEPPER_ALIGN_AMP.
* R Flag to recalculate points based on current probe offsets
*/
void GcodeSuite::G34() {
DEBUG_SECTION(log_G34, "G34", DEBUGGING(LEVELING));
if (DEBUGGING(LEVELING)) log_machine_info();
if (parser.seenval('Z')) {
stepper.set_separate_multi_axis(true);
const bool state = parser.boolval('S');
planner.synchronize(); // Prevent damage
const bool seenL = parser.seen('L');
if (seenL) stepper.set_all_z_lock(false);
const bool seenZ = parser.seenval('Z');
if (seenZ) {
const bool state = parser.boolval('S', true);
switch (parser.intval('Z')) {
case 1: stepper.set_z1_lock(state); break;
case 2: stepper.set_z2_lock(state); break;
@ -81,12 +89,10 @@ void GcodeSuite::G34() {
#endif
#endif
}
return;
}
if (parser.seen('L')) {
stepper.set_all_z_lock(false);
stepper.set_separate_multi_axis(false);
if (seenL || seenZ) {
stepper.set_separate_multi_axis(seenZ);
return;
}
@ -112,24 +118,16 @@ void GcodeSuite::G34() {
break;
}
const float z_auto_align_amplification =
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
Z_STEPPER_ALIGN_AMP;
#else
parser.floatval('A', Z_STEPPER_ALIGN_AMP);
if (!WITHIN(ABS(z_auto_align_amplification), 0.5f, 2.0f)) {
SERIAL_ECHOLNPGM("?(A)mplification out of bounds (0.5-2.0).");
break;
}
#endif
const float z_auto_align_amplification = TERN(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS, Z_STEPPER_ALIGN_AMP, parser.floatval('A', Z_STEPPER_ALIGN_AMP));
if (!WITHIN(ABS(z_auto_align_amplification), 0.5f, 2.0f)) {
SERIAL_ECHOLNPGM("?(A)mplification out of bounds (0.5-2.0).");
break;
}
if (parser.seen('R')) z_stepper_align.reset_to_default();
const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE;
// Wait for planner moves to finish!
planner.synchronize();
// Disable the leveling matrix before auto-aligning
#if HAS_LEVELING
TERN_(RESTORE_LEVELING_AFTER_G34, const bool leveling_was_active = planner.leveling_active);

7
Marlin/src/inc/SanityCheck.h
View file

@ -2785,8 +2785,11 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "Z_STEPPER_AUTO_ALIGN requires NUM_Z_STEPPER_DRIVERS greater than 1."
#elif !HAS_BED_PROBE
#error "Z_STEPPER_AUTO_ALIGN requires a Z-bed probe."
#elif ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) && NUM_Z_STEPPER_DRIVERS < 3
#error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires NUM_Z_STEPPER_DRIVERS to be 3 or 4."
#elif ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
static_assert(WITHIN(Z_STEPPER_ALIGN_AMP, 0.5, 2.0), "Z_STEPPER_ALIGN_AMP must be between 0.5 and 2.0.");
#if NUM_Z_STEPPER_DRIVERS < 3
#error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires NUM_Z_STEPPER_DRIVERS to be 3 or 4."
#endif
#endif
#endif