diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml
index 9624733838..41b3047485 100644
--- a/.github/workflows/test-builds.yml
+++ b/.github/workflows/test-builds.yml
@@ -83,6 +83,7 @@ jobs:
         - STM32F103RET6_creality
         - LERDGEX
         - mks_robin_nano35
+        - mks_robin_nano35_stm32
         - NUCLEO_F767ZI
 
         # Put lengthy tests last
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 0b6234bbcc..719e11b899 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -2095,9 +2095,10 @@
 //
 // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
 // A clone of the RepRapDiscount full graphics display but with
-// different pins/wiring (see pins_ANET_10.h).
+// different pins/wiring (see pins_ANET_10.h). Enable one of these.
 //
 //#define ANET_FULL_GRAPHICS_LCD
+//#define ANET_FULL_GRAPHICS_LCD_ALT_WIRING
 
 //
 // AZSMZ 12864 LCD with SD
@@ -2342,6 +2343,10 @@
   //#define XPT2046_Y_CALIBRATION -8981
   //#define XPT2046_X_OFFSET        -43
   //#define XPT2046_Y_OFFSET        257
+
+  #if ENABLED(TFT_COLOR_UI)
+    //#define SINGLE_TOUCH_NAVIGATION
+  #endif
 #endif
 
 //
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index b39e9e1722..cd8a055ffb 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -808,7 +808,9 @@
 
   #define RESTORE_LEVELING_AFTER_G35    // Enable to restore leveling setup after operation
   //#define REPORT_TRAMMING_MM          // Report Z deviation (mm) for each point relative to the first
-  //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming
+
+  //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI)
+  //#define ASSISTED_TRAMMING_WIZARD    // Make the menu item open a Tramming Wizard sub-menu
 
   /**
    * Screw thread:
diff --git a/Marlin/src/HAL/DUE/watchdog.cpp b/Marlin/src/HAL/DUE/watchdog.cpp
index 0f46971830..e144db8291 100644
--- a/Marlin/src/HAL/DUE/watchdog.cpp
+++ b/Marlin/src/HAL/DUE/watchdog.cpp
@@ -36,7 +36,7 @@ void watchdogSetup() {
   #if ENABLED(USE_WATCHDOG)
 
     // 4 seconds timeout
-    uint32_t timeout = 4000;
+    uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
 
     // Calculate timeout value in WDT counter ticks: This assumes
     // the slow clock is running at 32.768 kHz watchdog
diff --git a/Marlin/src/HAL/ESP32/watchdog.cpp b/Marlin/src/HAL/ESP32/watchdog.cpp
index f6fcfa3182..5ec03c4607 100644
--- a/Marlin/src/HAL/ESP32/watchdog.cpp
+++ b/Marlin/src/HAL/ESP32/watchdog.cpp
@@ -25,6 +25,8 @@
 
 #if ENABLED(USE_WATCHDOG)
 
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 #include "watchdog.h"
 
 void watchdogSetup() {
diff --git a/Marlin/src/HAL/LINUX/watchdog.cpp b/Marlin/src/HAL/LINUX/watchdog.cpp
index c15b0e311c..84202e48b6 100644
--- a/Marlin/src/HAL/LINUX/watchdog.cpp
+++ b/Marlin/src/HAL/LINUX/watchdog.cpp
@@ -27,6 +27,8 @@
 
 #include "watchdog.h"
 
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 void watchdog_init() {}
 void HAL_watchdog_refresh() {}
 
diff --git a/Marlin/src/HAL/LINUX/watchdog.h b/Marlin/src/HAL/LINUX/watchdog.h
index 472624cc78..49a0d9c631 100644
--- a/Marlin/src/HAL/LINUX/watchdog.h
+++ b/Marlin/src/HAL/LINUX/watchdog.h
@@ -21,7 +21,5 @@
  */
 #pragma once
 
-#define WDT_TIMEOUT   4000000 // 4 second timeout
-
 void watchdog_init();
 void HAL_watchdog_refresh();
diff --git a/Marlin/src/HAL/LPC1768/HAL_SPI.cpp b/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
index b800721c5a..16ac789fc0 100644
--- a/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
+++ b/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
@@ -127,11 +127,9 @@
     for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
   }
 
-  void spiSend(uint32_t chan, byte b) {
-  }
+  void spiSend(uint32_t chan, byte b) {}
 
-  void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
-  }
+  void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {}
 
   // Read single byte from SPI
   uint8_t spiRec() { return doio(0xFF); }
@@ -143,9 +141,7 @@
     for (uint16_t i = 0; i < nbyte; i++) buf[i] = doio(0xFF);
   }
 
-  uint8_t spiTransfer(uint8_t b) {
-    return doio(b);
-  }
+  uint8_t spiTransfer(uint8_t b) { return doio(b); }
 
   // Write from buffer to SPI
   void spiSendBlock(uint8_t token, const uint8_t* buf) {
@@ -201,6 +197,15 @@ SPIClass::SPIClass(uint8_t device) {
   GPDMA_Init();
 }
 
+SPIClass::SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel) {
+  #if BOARD_NR_SPI >= 1
+    if (mosi == BOARD_SPI1_MOSI_PIN) SPIClass(1);
+  #endif
+  #if BOARD_NR_SPI >= 2
+    if (mosi == BOARD_SPI2_MOSI_PIN) SPIClass(2);
+  #endif
+}
+
 void SPIClass::begin() {
   // Init the SPI pins in the first begin call
   if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
@@ -331,25 +336,15 @@ void SPIClass::read(uint8_t *buf, uint32_t len) {
   for (uint16_t i = 0; i < len; i++) buf[i] = transfer(0xFF);
 }
 
-void SPIClass::setClock(uint32_t clock) {
-  _currentSetting->clock = clock;
-}
+void SPIClass::setClock(uint32_t clock) { _currentSetting->clock = clock; }
 
-void SPIClass::setModule(uint8_t device) {
-  _currentSetting = &_settings[device - 1];// SPI channels are called 1 2 and 3 but the array is zero indexed
-}
+void SPIClass::setModule(uint8_t device) { _currentSetting = &_settings[device - 1]; } // SPI channels are called 1, 2, and 3 but the array is zero-indexed
 
-void SPIClass::setBitOrder(uint8_t bitOrder) {
-  _currentSetting->bitOrder = bitOrder;
-}
+void SPIClass::setBitOrder(uint8_t bitOrder) { _currentSetting->bitOrder = bitOrder; }
 
-void SPIClass::setDataMode(uint8_t dataMode) {
-  _currentSetting->dataMode = dataMode;
-}
+void SPIClass::setDataMode(uint8_t dataMode) { _currentSetting->dataMode = dataMode; }
 
-void SPIClass::setDataSize(uint32_t ds) {
-  _currentSetting->dataSize = ds;
-}
+void SPIClass::setDataSize(uint32_t dataSize) { _currentSetting->dataSize = dataSize; }
 
 /**
  * Set up/tear down
diff --git a/Marlin/src/HAL/STM32F1/SoftwareSerial.h b/Marlin/src/HAL/LPC1768/MarlinSPI.h
similarity index 52%
rename from Marlin/src/HAL/STM32F1/SoftwareSerial.h
rename to Marlin/src/HAL/LPC1768/MarlinSPI.h
index 1c8058665a..fab245f904 100644
--- a/Marlin/src/HAL/STM32F1/SoftwareSerial.h
+++ b/Marlin/src/HAL/LPC1768/MarlinSPI.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -18,27 +21,25 @@
  */
 #pragma once
 
-#include <stdint.h>
+#include <SPI.h>
 
-#ifndef HAVE_SW_SERIAL
-   #define SW_SERIAL_PLACEHOLDER 1
-#endif
+/**
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
+ *
+ */
 
-class SoftwareSerial {
-public:
-  SoftwareSerial(int8_t RX_pin, int8_t TX_pin);
-
-  void begin(const uint32_t baudrate);
-
-  bool available();
-
-  uint8_t read();
-  uint16_t write(uint8_t byte);
-  void flush();
-
-  void listen();
-  void stopListening();
-
-protected:
-  bool listening;
-};
+using MarlinSPI = SPIClass;
diff --git a/Marlin/src/HAL/LPC1768/include/SPI.h b/Marlin/src/HAL/LPC1768/include/SPI.h
index ffcd87fe96..ecd91f6a3b 100644
--- a/Marlin/src/HAL/LPC1768/include/SPI.h
+++ b/Marlin/src/HAL/LPC1768/include/SPI.h
@@ -126,6 +126,11 @@ public:
    */
   SPIClass(uint8_t spiPortNumber);
 
+  /**
+   * Init using pins
+   */
+  SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)-1);
+
   /**
    * Select and configure the current selected SPI device to use
    */
diff --git a/Marlin/src/HAL/LPC1768/tft/xpt2046.cpp b/Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
index 5f96630043..e51256a708 100644
--- a/Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
+++ b/Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/HAL/LPC1768/tft/xpt2046.h b/Marlin/src/HAL/LPC1768/tft/xpt2046.h
index 019f75efce..29db0b3fc4 100644
--- a/Marlin/src/HAL/LPC1768/tft/xpt2046.h
+++ b/Marlin/src/HAL/LPC1768/tft/xpt2046.h
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/HAL/LPC1768/watchdog.cpp b/Marlin/src/HAL/LPC1768/watchdog.cpp
index 3cd22d6651..f23ccf5b51 100644
--- a/Marlin/src/HAL/LPC1768/watchdog.cpp
+++ b/Marlin/src/HAL/LPC1768/watchdog.cpp
@@ -28,6 +28,8 @@
 #include <lpc17xx_wdt.h>
 #include "watchdog.h"
 
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 void watchdog_init() {
   #if ENABLED(WATCHDOG_RESET_MANUAL)
     // We enable the watchdog timer, but only for the interrupt.
@@ -52,7 +54,7 @@ void watchdog_init() {
   #else
     WDT_Init(WDT_CLKSRC_IRC, WDT_MODE_RESET);
   #endif
-  WDT_Start(WDT_TIMEOUT);
+  WDT_Start(WDT_TIMEOUT_US);
 }
 
 void HAL_watchdog_refresh() {
diff --git a/Marlin/src/HAL/LPC1768/watchdog.h b/Marlin/src/HAL/LPC1768/watchdog.h
index cc170881f3..c843f0ed55 100644
--- a/Marlin/src/HAL/LPC1768/watchdog.h
+++ b/Marlin/src/HAL/LPC1768/watchdog.h
@@ -21,8 +21,6 @@
  */
 #pragma once
 
-#define WDT_TIMEOUT   4000000 // 4 second timeout
-
 void watchdog_init();
 void HAL_watchdog_refresh();
 
diff --git a/Marlin/src/HAL/SAMD51/watchdog.cpp b/Marlin/src/HAL/SAMD51/watchdog.cpp
index ebc8dffe13..9de451836a 100644
--- a/Marlin/src/HAL/SAMD51/watchdog.cpp
+++ b/Marlin/src/HAL/SAMD51/watchdog.cpp
@@ -24,28 +24,30 @@
 
 #if ENABLED(USE_WATCHDOG)
 
-  #include "watchdog.h"
+#include "watchdog.h"
 
-  void watchdog_init() {
-    // The low-power oscillator used by the WDT runs at 32,768 Hz with
-    // a 1:32 prescale, thus 1024 Hz, though probably not super precise.
+#define WDT_TIMEOUT_REG TERN(WATCHDOG_DURATION_8S, WDT_CONFIG_PER_CYC8192, WDT_CONFIG_PER_CYC4096) // 4 or 8 second timeout
 
-    // Setup WDT clocks
-    MCLK->APBAMASK.bit.OSC32KCTRL_ = true;
-    MCLK->APBAMASK.bit.WDT_ = true;
-    OSC32KCTRL->OSCULP32K.bit.EN1K = true;      // Enable out 1K (this is what WDT uses)
+void watchdog_init() {
+  // The low-power oscillator used by the WDT runs at 32,768 Hz with
+  // a 1:32 prescale, thus 1024 Hz, though probably not super precise.
 
-    WDT->CTRLA.bit.ENABLE = false;              // Disable watchdog for config
-    SYNC(WDT->SYNCBUSY.bit.ENABLE);
+  // Setup WDT clocks
+  MCLK->APBAMASK.bit.OSC32KCTRL_ = true;
+  MCLK->APBAMASK.bit.WDT_ = true;
+  OSC32KCTRL->OSCULP32K.bit.EN1K = true;      // Enable out 1K (this is what WDT uses)
 
-    WDT->INTENCLR.reg = WDT_INTENCLR_EW;        // Disable early warning interrupt
-    WDT->CONFIG.reg = WDT_CONFIG_PER_CYC4096;   // Set at least 4s period for chip reset
+  WDT->CTRLA.bit.ENABLE = false;              // Disable watchdog for config
+  SYNC(WDT->SYNCBUSY.bit.ENABLE);
 
-    HAL_watchdog_refresh();
+  WDT->INTENCLR.reg = WDT_INTENCLR_EW;        // Disable early warning interrupt
+  WDT->CONFIG.reg = WDT_TIMEOUT_REG;          // Set a 4s or 8s period for chip reset
 
-    WDT->CTRLA.reg = WDT_CTRLA_ENABLE;          // Start watchdog now in normal mode
-    SYNC(WDT->SYNCBUSY.bit.ENABLE);
-  }
+  HAL_watchdog_refresh();
+
+  WDT->CTRLA.reg = WDT_CTRLA_ENABLE;          // Start watchdog now in normal mode
+  SYNC(WDT->SYNCBUSY.bit.ENABLE);
+}
 
 #endif // USE_WATCHDOG
 
diff --git a/Marlin/src/HAL/STM32/HAL.h b/Marlin/src/HAL/STM32/HAL.h
index 3cd138ba61..c92c8890ea 100644
--- a/Marlin/src/HAL/STM32/HAL.h
+++ b/Marlin/src/HAL/STM32/HAL.h
@@ -185,3 +185,20 @@ typedef void (*systickCallback_t)(void);
 void systick_attach_callback(systickCallback_t cb);
 void HAL_SYSTICK_Callback();
 extern volatile uint32_t systick_uptime_millis;
+
+#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+
+/**
+ * set_pwm_frequency
+ *  Set the frequency of the timer corresponding to the provided pin
+ *  All Timer PWM pins run at the same frequency
+ */
+void set_pwm_frequency(const pin_t pin, int f_desired);
+
+/**
+ * set_pwm_duty
+ *  Set the PWM duty cycle of the provided pin to the provided value
+ *  Optionally allows inverting the duty cycle [default = false]
+ *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
+ */
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
diff --git a/Marlin/src/HAL/STM32/MarlinSPI.cpp b/Marlin/src/HAL/STM32/MarlinSPI.cpp
new file mode 100644
index 0000000000..fd05b1aeb4
--- /dev/null
+++ b/Marlin/src/HAL/STM32/MarlinSPI.cpp
@@ -0,0 +1,161 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "MarlinSPI.h"
+
+static void spi_init(spi_t *obj, uint32_t speed, spi_mode_e mode, uint8_t msb, uint32_t dataSize) {
+  spi_init(obj, speed, mode, msb);
+  // spi_init set 8bit always
+  // TODO: copy the code from spi_init and handle data size, to avoid double init always!!
+  if (dataSize != SPI_DATASIZE_8BIT) {
+    obj->handle.Init.DataSize = dataSize;
+    HAL_SPI_Init(&obj->handle);
+    __HAL_SPI_ENABLE(&obj->handle);
+  }
+}
+
+void MarlinSPI::setClockDivider(uint8_t _div) {
+  _speed = spi_getClkFreq(&_spi);// / _div;
+  _clockDivider = _div;
+}
+
+void MarlinSPI::begin(void) {
+  //TODO: only call spi_init if any parameter changed!!
+  spi_init(&_spi, _speed, _dataMode, _bitOrder, _dataSize);
+}
+
+void MarlinSPI::setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc) {
+  _dmaHandle.Init.Direction = direction;
+  _dmaHandle.Init.PeriphInc = DMA_PINC_DISABLE;
+  _dmaHandle.Init.Mode = DMA_NORMAL;
+  _dmaHandle.Init.Priority = DMA_PRIORITY_LOW;
+  _dmaHandle.Init.MemInc = minc ? DMA_MINC_ENABLE : DMA_MINC_DISABLE;
+
+  if (_dataSize == DATA_SIZE_8BIT) {
+    _dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    _dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+  }
+  else {
+    _dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+    _dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+  }
+  #ifdef STM32F4xx
+    _dmaHandle.Init.Channel = DMA_CHANNEL_3;
+    _dmaHandle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+  #endif
+
+  // start DMA hardware
+  // TODO: check if hardware is already enabled
+  #ifdef SPI1_BASE
+    if (_spiHandle.Instance == SPI1) {
+      #ifdef STM32F1xx
+        __HAL_RCC_DMA1_CLK_ENABLE();
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Channel3 : DMA1_Channel2;
+      #elif defined(STM32F4xx)
+        __HAL_RCC_DMA2_CLK_ENABLE();
+        _dmaHandle.Instance = DMA2_Stream3;
+      #endif
+    }
+  #endif
+  #ifdef SPI2_BASE
+    if (_spiHandle.Instance == SPI2) {
+      #ifdef STM32F1xx
+        __HAL_RCC_DMA1_CLK_ENABLE();
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Channel5 : DMA1_Channel4;
+      #elif defined(STM32F4xx)
+        //TODO: f4 dma config
+      #endif
+    }
+  #endif
+  #ifdef SPI3_BASE
+    if (_spiHandle.Instance == SPI3) {
+      #ifdef STM32F1xx
+        __HAL_RCC_DMA2_CLK_ENABLE();
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA2_Channel2 : DMA2_Channel1;
+      #elif defined(STM32F4xx)
+        //TODO: f4 dma config
+      #endif
+    }
+  #endif
+
+  HAL_DMA_Init(&_dmaHandle);
+}
+
+byte MarlinSPI::transfer(uint8_t _data) {
+  uint8_t rxData = 0xFF;
+  HAL_SPI_TransmitReceive(&_spi.handle, &_data, &rxData, 1, HAL_MAX_DELAY);
+  return rxData;
+}
+
+uint8_t MarlinSPI::dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length) {
+  const uint8_t ff = 0xFF;
+
+  //if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) //only enable if disabled
+  __HAL_SPI_ENABLE(&_spi.handle);
+
+  if (receiveBuf) {
+    setupDma(_spi.handle, _dmaRx, DMA_PERIPH_TO_MEMORY, true);
+    HAL_DMA_Start(&_dmaRx, (uint32_t)&(_spi.handle.Instance->DR), (uint32_t)receiveBuf, length);
+    SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_RXDMAEN); /* Enable Rx DMA Request */
+  }
+
+  // check for 2 lines transfer
+  bool mincTransmit = true;
+  if (transmitBuf == nullptr && _spi.handle.Init.Direction == SPI_DIRECTION_2LINES && _spi.handle.Init.Mode == SPI_MODE_MASTER) {
+    transmitBuf = &ff;
+    mincTransmit = false;
+  }
+
+  if (transmitBuf) {
+    setupDma(_spi.handle, _dmaTx, DMA_MEMORY_TO_PERIPH, mincTransmit);
+    HAL_DMA_Start(&_dmaTx, (uint32_t)transmitBuf, (uint32_t)&(_spi.handle.Instance->DR), length);
+    SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_TXDMAEN);   /* Enable Tx DMA Request */
+  }
+
+  if (transmitBuf) {
+    HAL_DMA_PollForTransfer(&_dmaTx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
+    HAL_DMA_Abort(&_dmaTx);
+    HAL_DMA_DeInit(&_dmaTx);
+  }
+
+  // while ((_spi.handle.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
+
+  if (receiveBuf) {
+    HAL_DMA_PollForTransfer(&_dmaRx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
+    HAL_DMA_Abort(&_dmaRx);
+    HAL_DMA_DeInit(&_dmaRx);
+  }
+
+  return 1;
+}
+
+uint8_t MarlinSPI::dmaSend(const void * transmitBuf, uint16_t length, bool minc) {
+  setupDma(_spi.handle, _dmaTx, DMA_MEMORY_TO_PERIPH, minc);
+  HAL_DMA_Start(&_dmaTx, (uint32_t)transmitBuf, (uint32_t)&(_spi.handle.Instance->DR), length);
+  __HAL_SPI_ENABLE(&_spi.handle);
+  SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_TXDMAEN);   /* Enable Tx DMA Request */
+  HAL_DMA_PollForTransfer(&_dmaTx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
+  HAL_DMA_Abort(&_dmaTx);
+  // DeInit objects
+  HAL_DMA_DeInit(&_dmaTx);
+  return 1;
+}
diff --git a/Marlin/src/HAL/STM32/MarlinSPI.h b/Marlin/src/HAL/STM32/MarlinSPI.h
new file mode 100644
index 0000000000..fbd3585ff4
--- /dev/null
+++ b/Marlin/src/HAL/STM32/MarlinSPI.h
@@ -0,0 +1,107 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "HAL.h"
+#include <SPI.h>
+
+extern "C" {
+  #include <utility/spi_com.h>
+}
+
+/**
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
+ *
+ */
+
+#define DATA_SIZE_8BIT SPI_DATASIZE_8BIT
+#define DATA_SIZE_16BIT SPI_DATASIZE_16BIT
+
+class MarlinSPI {
+public:
+  MarlinSPI() : MarlinSPI(NC, NC, NC, NC) {}
+
+  MarlinSPI(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)NC) : _mosiPin(mosi), _misoPin(miso), _sckPin(sclk), _ssPin(ssel) {
+    _spi.pin_miso = digitalPinToPinName(_misoPin);
+    _spi.pin_mosi = digitalPinToPinName(_mosiPin);
+    _spi.pin_sclk = digitalPinToPinName(_sckPin);
+    _spi.pin_ssel = digitalPinToPinName(_ssPin);
+    _dataSize = DATA_SIZE_8BIT;
+    _bitOrder = MSBFIRST;
+    _dataMode = SPI_MODE_0;
+    _spi.handle.State = HAL_SPI_STATE_RESET;
+    setClockDivider(SPI_SPEED_CLOCK_DIV2_MHZ);
+  }
+
+  void begin(void);
+  void end(void) {}
+
+  byte transfer(uint8_t _data);
+  uint8_t dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length);
+  uint8_t dmaSend(const void * transmitBuf, uint16_t length, bool minc = true);
+
+  /* These methods are deprecated and kept for compatibility.
+   * Use SPISettings with SPI.beginTransaction() to configure SPI parameters.
+   */
+  void setBitOrder(BitOrder _order) { _bitOrder = _order; }
+
+  void setDataMode(uint8_t _mode) {
+    switch (_mode) {
+      case SPI_MODE0: _dataMode = SPI_MODE_0; break;
+      case SPI_MODE1: _dataMode = SPI_MODE_1; break;
+      case SPI_MODE2: _dataMode = SPI_MODE_2; break;
+      case SPI_MODE3: _dataMode = SPI_MODE_3; break;
+    }
+  }
+
+  void setClockDivider(uint8_t _div);
+
+private:
+  void setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc = false);
+
+  spi_t _spi;
+  DMA_HandleTypeDef _dmaTx;
+  DMA_HandleTypeDef _dmaRx;
+  BitOrder _bitOrder;
+  spi_mode_e _dataMode;
+  uint8_t _clockDivider;
+  uint32_t _speed;
+  uint32_t _dataSize;
+  pin_t _mosiPin;
+  pin_t _misoPin;
+  pin_t _sckPin;
+  pin_t _ssPin;
+};
diff --git a/Marlin/src/HAL/STM32/eeprom_flash.cpp b/Marlin/src/HAL/STM32/eeprom_flash.cpp
index c83376d265..702e42e561 100644
--- a/Marlin/src/HAL/STM32/eeprom_flash.cpp
+++ b/Marlin/src/HAL/STM32/eeprom_flash.cpp
@@ -113,7 +113,7 @@ bool PersistentStore::access_start() {
       // This must be the first time since power on that we have accessed the storage, or someone
       // loaded and called write_data and never called access_finish.
       // Lets go looking for the slot that holds our configuration.
-      if (eeprom_data_written) DEBUG_ECHOLN("Dangling EEPROM write_data");
+      if (eeprom_data_written) DEBUG_ECHOLNPGM("Dangling EEPROM write_data");
       uint32_t address = FLASH_ADDRESS_START;
       while (address <= FLASH_ADDRESS_END) {
         uint32_t address_value = (*(__IO uint32_t*)address);
diff --git a/Marlin/src/HAL/STM32/fast_pwm.cpp b/Marlin/src/HAL/STM32/fast_pwm.cpp
new file mode 100644
index 0000000000..99101c6e81
--- /dev/null
+++ b/Marlin/src/HAL/STM32/fast_pwm.cpp
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if NEEDS_HARDWARE_PWM
+
+#include "HAL.h"
+#include "timers.h"
+
+void set_pwm_frequency(const pin_t pin, int f_desired) {
+  if (!PWM_PIN(pin)) return;            // Don't proceed if no hardware timer
+
+  PinName pin_name = digitalPinToPinName(pin);
+  TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM); // Get HAL timer instance
+
+  LOOP_S_L_N(i, 0, NUM_HARDWARE_TIMERS) // Protect used timers
+    if (timer_instance[i] && timer_instance[i]->getHandle()->Instance == Instance)
+      return;
+
+  pwm_start(pin_name, f_desired, 0, RESOLUTION_8B_COMPARE_FORMAT);
+}
+
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
+  PinName pin_name = digitalPinToPinName(pin);
+  TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM);
+  uint16_t adj_val = Instance->ARR * v / v_size;
+  if (invert) adj_val = Instance->ARR - adj_val;
+
+  switch (get_pwm_channel(pin_name)) {
+    case TIM_CHANNEL_1: LL_TIM_OC_SetCompareCH1(Instance, adj_val); break;
+    case TIM_CHANNEL_2: LL_TIM_OC_SetCompareCH2(Instance, adj_val); break;
+    case TIM_CHANNEL_3: LL_TIM_OC_SetCompareCH3(Instance, adj_val); break;
+    case TIM_CHANNEL_4: LL_TIM_OC_SetCompareCH4(Instance, adj_val); break;
+  }
+}
+
+#endif // NEEDS_HARDWARE_PWM
diff --git a/Marlin/src/HAL/STM32/inc/SanityCheck.h b/Marlin/src/HAL/STM32/inc/SanityCheck.h
index 30d0750d90..c51fecc7bd 100644
--- a/Marlin/src/HAL/STM32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h
@@ -28,9 +28,6 @@
 //  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
 //#endif
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
-  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32."
-#endif
 
 #if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
   #undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
diff --git a/Marlin/src/HAL/STM32/tft/tft_fsmc.h b/Marlin/src/HAL/STM32/tft/tft_fsmc.h
index cbec7613ef..e2e0128c5e 100644
--- a/Marlin/src/HAL/STM32/tft/tft_fsmc.h
+++ b/Marlin/src/HAL/STM32/tft/tft_fsmc.h
@@ -21,30 +21,28 @@
  */
 #pragma once
 
+#include "../../../inc/MarlinConfig.h"
+
 #ifdef STM32F1xx
   #include "stm32f1xx_hal.h"
+  #define __IS_DMA_ENABLED(__HANDLE__)  ((__HANDLE__)->Instance->CCR & DMA_CCR_EN)
 #elif defined(STM32F4xx)
   #include "stm32f4xx_hal.h"
+  #define __IS_DMA_ENABLED(__HANDLE__)  ((__HANDLE__)->Instance->CR & DMA_SxCR_EN)
 #else
-  #error FSMC TFT is currently only supported on STM32F1 and STM32F4 hardware.
+  #error "FSMC TFT is currently only supported on STM32F1 and STM32F4 hardware."
 #endif
 
 #ifndef LCD_READ_ID
-  #define LCD_READ_ID 0x04   // Read display identification information (0xD3 on ILI9341)
+  #define LCD_READ_ID  0x04   // Read display identification information (0xD3 on ILI9341)
 #endif
 #ifndef LCD_READ_ID4
   #define LCD_READ_ID4 0xD3   // Read display identification information (0xD3 on ILI9341)
 #endif
 
-#define DATASIZE_8BIT    SPI_DATASIZE_8BIT
-#define DATASIZE_16BIT   SPI_DATASIZE_16BIT
-#define TFT_IO_DRIVER TFT_FSMC
-
-#ifdef STM32F1xx
-  #define __IS_DMA_ENABLED(__HANDLE__)      ((__HANDLE__)->Instance->CCR & DMA_CCR_EN)
-#elif defined(STM32F4xx)
-  #define __IS_DMA_ENABLED(__HANDLE__)      ((__HANDLE__)->Instance->CR & DMA_SxCR_EN)
-#endif
+#define DATASIZE_8BIT  SPI_DATASIZE_8BIT
+#define DATASIZE_16BIT SPI_DATASIZE_16BIT
+#define TFT_IO_DRIVER  TFT_FSMC
 
 typedef struct {
   __IO uint16_t REG;
diff --git a/Marlin/src/HAL/STM32/tft/xpt2046.cpp b/Marlin/src/HAL/STM32/tft/xpt2046.cpp
index 8c8d28f66a..f95bb8ca4d 100644
--- a/Marlin/src/HAL/STM32/tft/xpt2046.cpp
+++ b/Marlin/src/HAL/STM32/tft/xpt2046.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/HAL/STM32/tft/xpt2046.h b/Marlin/src/HAL/STM32/tft/xpt2046.h
index 7a6d8439c5..3acf3898a3 100644
--- a/Marlin/src/HAL/STM32/tft/xpt2046.h
+++ b/Marlin/src/HAL/STM32/tft/xpt2046.h
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/HAL/STM32/timers.cpp b/Marlin/src/HAL/STM32/timers.cpp
index 442aa74d1c..90f8c3dc94 100644
--- a/Marlin/src/HAL/STM32/timers.cpp
+++ b/Marlin/src/HAL/STM32/timers.cpp
@@ -27,7 +27,6 @@
 // Local defines
 // ------------------------
 
-#define NUM_HARDWARE_TIMERS 2
 
 // Default timer priorities. Override by specifying alternate priorities in the board pins file.
 // The TONE timer is not present here, as it currently cannot be set programmatically. It is set
diff --git a/Marlin/src/HAL/STM32/timers.h b/Marlin/src/HAL/STM32/timers.h
index de762794ee..4649824303 100644
--- a/Marlin/src/HAL/STM32/timers.h
+++ b/Marlin/src/HAL/STM32/timers.h
@@ -43,6 +43,8 @@
 #define hal_timer_t uint32_t
 #define HAL_TIMER_TYPE_MAX UINT16_MAX
 
+#define NUM_HARDWARE_TIMERS 2
+
 #ifndef STEP_TIMER_NUM
   #define STEP_TIMER_NUM        0  // Timer Index for Stepper
 #endif
@@ -103,7 +105,7 @@ void SetTimerInterruptPriorities();
 
 // FORCE_INLINE because these are used in performance-critical situations
 FORCE_INLINE bool HAL_timer_initialized(const uint8_t timer_num) {
-  return timer_instance[timer_num] != NULL;
+  return timer_instance[timer_num] != nullptr;
 }
 FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
   return HAL_timer_initialized(timer_num) ? timer_instance[timer_num]->getCount() : 0;
diff --git a/Marlin/src/HAL/STM32/watchdog.cpp b/Marlin/src/HAL/STM32/watchdog.cpp
index cc18553149..3d83408311 100644
--- a/Marlin/src/HAL/STM32/watchdog.cpp
+++ b/Marlin/src/HAL/STM32/watchdog.cpp
@@ -25,23 +25,26 @@
 
 #if ENABLED(USE_WATCHDOG)
 
-  #include "../../inc/MarlinConfig.h"
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
 
-  #include "watchdog.h"
-  #include <IWatchdog.h>
+#include "../../inc/MarlinConfig.h"
 
-  void watchdog_init() {
-    #if DISABLED(DISABLE_WATCHDOG_INIT)
-      IWatchdog.begin(4000000); // 4 sec timeout
-    #endif
-  }
+#include "watchdog.h"
+#include <IWatchdog.h>
 
-  void HAL_watchdog_refresh() {
-    IWatchdog.reload();
-    #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
-      TOGGLE(LED_PIN);  // heartbeat indicator
-    #endif
-  }
+void watchdog_init() {
+  #if DISABLED(DISABLE_WATCHDOG_INIT)
+    IWatchdog.begin(WDT_TIMEOUT_US);
+  #endif
+}
+
+void HAL_watchdog_refresh() {
+  IWatchdog.reload();
+  #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
+    TOGGLE(LED_PIN);  // heartbeat indicator
+  #endif
+}
 
 #endif // USE_WATCHDOG
+
 #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
diff --git a/Marlin/src/HAL/STM32F1/SoftwareSerial.cpp b/Marlin/src/HAL/STM32F1/MarlinSPI.h
similarity index 51%
rename from Marlin/src/HAL/STM32F1/SoftwareSerial.cpp
rename to Marlin/src/HAL/STM32F1/MarlinSPI.h
index 993403cf72..fab245f904 100644
--- a/Marlin/src/HAL/STM32F1/SoftwareSerial.cpp
+++ b/Marlin/src/HAL/STM32F1/MarlinSPI.h
@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,45 +19,27 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-#if defined(__STM32F1__) && !defined(HAVE_SW_SERIAL)
+#pragma once
+
+#include <SPI.h>
 
 /**
- * Empty class for Software Serial implementation (Custom RX/TX pins)
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
  *
- * TODO: Optionally use https://github.com/FYSETC/SoftwareSerialM if TMC UART is wanted
  */
 
-#include "SoftwareSerial.h"
-
-// Constructor
-
-SoftwareSerial::SoftwareSerial(int8_t RX_pin, int8_t TX_pin) {}
-
-// Public
-
-void SoftwareSerial::begin(const uint32_t baudrate) {
-}
-
-bool SoftwareSerial::available() {
-  return false;
-}
-
-uint8_t SoftwareSerial::read() {
-  return 0;
-}
-
-uint16_t SoftwareSerial::write(uint8_t byte) {
-  return 0;
-}
-
-void SoftwareSerial::flush() {}
-
-void SoftwareSerial::listen() {
-  listening = true;
-}
-
-void SoftwareSerial::stopListening() {
-  listening = false;
-}
-
-#endif // __STM32F1__
+using MarlinSPI = SPIClass;
diff --git a/Marlin/src/HAL/STM32F1/SPI.cpp b/Marlin/src/HAL/STM32F1/SPI.cpp
index ef00b407a8..8995109238 100644
--- a/Marlin/src/HAL/STM32F1/SPI.cpp
+++ b/Marlin/src/HAL/STM32F1/SPI.cpp
@@ -147,6 +147,18 @@ SPIClass::SPIClass(uint32_t spi_num) {
   _currentSetting->state = SPI_STATE_IDLE;
 }
 
+SPIClass::SPIClass(int8_t mosi, int8_t miso, int8_t sclk, int8_t ssel) {
+  #if BOARD_NR_SPI >= 1
+    if (mosi == BOARD_SPI1_MOSI_PIN) SPIClass(1);
+  #endif
+  #if BOARD_NR_SPI >= 2
+    if (mosi == BOARD_SPI2_MOSI_PIN) SPIClass(2);
+  #endif
+  #if BOARD_NR_SPI >= 3
+    if (mosi == BOARD_SPI3_MOSI_PIN) SPIClass(3);
+  #endif
+}
+
 /**
  * Set up/tear down
  */
diff --git a/Marlin/src/HAL/STM32F1/SPI.h b/Marlin/src/HAL/STM32F1/SPI.h
index 0d20a46577..828644f1dd 100644
--- a/Marlin/src/HAL/STM32F1/SPI.h
+++ b/Marlin/src/HAL/STM32F1/SPI.h
@@ -163,6 +163,11 @@ public:
    */
   SPIClass(uint32_t spiPortNumber);
 
+  /**
+   * Init using pins
+   */
+  SPIClass(int8_t mosi, int8_t miso, int8_t sclk, int8_t ssel=-1);
+
   /**
    * @brief Equivalent to begin(SPI_1_125MHZ, MSBFIRST, 0).
    */
diff --git a/Marlin/src/HAL/STM32F1/build_flags.py b/Marlin/src/HAL/STM32F1/build_flags.py
index 98c871a1d8..c51fd4fa58 100755
--- a/Marlin/src/HAL/STM32F1/build_flags.py
+++ b/Marlin/src/HAL/STM32F1/build_flags.py
@@ -3,7 +3,7 @@ import sys
 
 #dynamic build flags for generic compile options
 if __name__ == "__main__":
-  args = " ".join([ "-std=gnu11",
+  args = " ".join([ "-std=gnu++14",
                     "-Os",
                     "-mcpu=cortex-m3",
                     "-mthumb",
diff --git a/Marlin/src/HAL/STM32F1/inc/SanityCheck.h b/Marlin/src/HAL/STM32F1/inc/SanityCheck.h
index 937bef8803..8d4c54ec0f 100644
--- a/Marlin/src/HAL/STM32F1/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32F1/inc/SanityCheck.h
@@ -25,11 +25,6 @@
  * Test STM32F1-specific configuration values for errors at compile-time.
  */
 
-#if !defined(HAVE_SW_SERIAL) && HAS_TMC_SW_SERIAL
-  #warning "With TMC2208/9 consider using SoftwareSerialM with HAVE_SW_SERIAL and appropriate SS_TIMER."
-  #error "Missing SoftwareSerial implementation."
-#endif
-
 #if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
   #undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
   #if USE_FALLBACK_EEPROM
diff --git a/Marlin/src/HAL/STM32F1/tft/tft_fsmc.h b/Marlin/src/HAL/STM32F1/tft/tft_fsmc.h
index 11eb1ffa84..d9ee1f4c77 100644
--- a/Marlin/src/HAL/STM32F1/tft/tft_fsmc.h
+++ b/Marlin/src/HAL/STM32F1/tft/tft_fsmc.h
@@ -22,7 +22,7 @@
 #pragma once
 
 #ifndef LCD_READ_ID
-  #define LCD_READ_ID 0x04   // Read display identification information (0xD3 on ILI9341)
+  #define LCD_READ_ID  0x04   // Read display identification information (0xD3 on ILI9341)
 #endif
 #ifndef LCD_READ_ID4
   #define LCD_READ_ID4 0xD3   // Read display identification information (0xD3 on ILI9341)
@@ -30,9 +30,9 @@
 
 #include <libmaple/dma.h>
 
-#define DATASIZE_8BIT    DMA_SIZE_8BITS
-#define DATASIZE_16BIT   DMA_SIZE_16BITS
-#define TFT_IO_DRIVER TFT_FSMC
+#define DATASIZE_8BIT  DMA_SIZE_8BITS
+#define DATASIZE_16BIT DMA_SIZE_16BITS
+#define TFT_IO_DRIVER  TFT_FSMC
 
 typedef struct {
   __IO uint16_t REG;
diff --git a/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp b/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
index 616d05fead..4f5c4df375 100644
--- a/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
+++ b/Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/HAL/STM32F1/tft/xpt2046.h b/Marlin/src/HAL/STM32F1/tft/xpt2046.h
index 019f75efce..29db0b3fc4 100644
--- a/Marlin/src/HAL/STM32F1/tft/xpt2046.h
+++ b/Marlin/src/HAL/STM32F1/tft/xpt2046.h
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/HAL/STM32F1/watchdog.cpp b/Marlin/src/HAL/STM32F1/watchdog.cpp
index ca91a6fe43..b812a4fa64 100644
--- a/Marlin/src/HAL/STM32F1/watchdog.cpp
+++ b/Marlin/src/HAL/STM32F1/watchdog.cpp
@@ -33,6 +33,11 @@
 #include <libmaple/iwdg.h>
 #include "watchdog.h"
 
+/**
+ *  The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
+ */
+#define STM32F1_WD_RELOAD TERN(WATCHDOG_DURATION_8S, 1250, 625) // 4 or 8 second timeout
+
 void HAL_watchdog_refresh() {
   #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
     TOGGLE(LED_PIN);  // heartbeat indicator
@@ -49,7 +54,7 @@ void watchdogSetup() {
  *
  * @return No return
  *
- * @details The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and 625 reload value (counts down to 0)
+ * @details The watchdog clock is 40Khz. So for a 4s or 8s interval use a /256 preescaler and 625 or 1250 reload value (counts down to 0).
  */
 void watchdog_init() {
   #if DISABLED(DISABLE_WATCHDOG_INIT)
diff --git a/Marlin/src/HAL/STM32F1/watchdog.h b/Marlin/src/HAL/STM32F1/watchdog.h
index 7185d69775..68920f8cb6 100644
--- a/Marlin/src/HAL/STM32F1/watchdog.h
+++ b/Marlin/src/HAL/STM32F1/watchdog.h
@@ -27,18 +27,9 @@
 
 #include <libmaple/iwdg.h>
 
-/**
- *  The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
- *  625 reload value (counts down to 0)
- *  use 1250 for 8 seconds
- */
-#define STM32F1_WD_RELOAD 625
-
-// Arduino STM32F1 core now has watchdog support
-
-// Initialize watchdog with a 4 second countdown time
+// Initialize watchdog with a 4 or 8 second countdown time
 void watchdog_init();
 
-// Reset watchdog. MUST be called at least every 4 seconds after the
-// first watchdog_init or STM32F1 will reset.
+// Reset watchdog. MUST be called every 4 or 8 seconds after the
+// first watchdog_init or the STM32F1 will reset.
 void HAL_watchdog_refresh();
diff --git a/Marlin/src/HAL/STM32_F4_F7/watchdog.cpp b/Marlin/src/HAL/STM32_F4_F7/watchdog.cpp
index cb12ec7aac..c0afd0cd58 100644
--- a/Marlin/src/HAL/STM32_F4_F7/watchdog.cpp
+++ b/Marlin/src/HAL/STM32_F4_F7/watchdog.cpp
@@ -25,31 +25,33 @@
 
 #if ENABLED(USE_WATCHDOG)
 
-  #include "watchdog.h"
+#include "watchdog.h"
 
-  IWDG_HandleTypeDef hiwdg;
+#define WDT_TIMEOUT_COUNT TERN(WATCHDOG_DURATION_8S, 8192, 4096) // 4 or 8 second timeout
 
-  void watchdog_init() {
-    hiwdg.Instance = IWDG;
-    hiwdg.Init.Prescaler = IWDG_PRESCALER_32; //32kHz LSI clock and 32x prescalar = 1024Hz IWDG clock
-    hiwdg.Init.Reload = 4095;           //4095 counts = 4 seconds at 1024Hz
-    if (HAL_IWDG_Init(&hiwdg) != HAL_OK) {
-      //Error_Handler();
-    }
-    else {
-      #if PIN_EXISTS(LED) && DISABLED(PINS_DEBUGGING)
-        TOGGLE(LED_PIN);  // heartbeat indicator
-      #endif
-    }
+IWDG_HandleTypeDef hiwdg;
+
+void watchdog_init() {
+  hiwdg.Instance = IWDG;
+  hiwdg.Init.Prescaler = IWDG_PRESCALER_32; // 32kHz LSI clock and 32x prescalar = 1024Hz IWDG clock
+  hiwdg.Init.Reload = WDT_TIMEOUT_COUNT - 1;
+  if (HAL_IWDG_Init(&hiwdg) != HAL_OK) {
+    //Error_Handler();
   }
-
-  void HAL_watchdog_refresh() {
-    /* Refresh IWDG: reload counter */
-    if (HAL_IWDG_Refresh(&hiwdg) != HAL_OK) {
-      /* Refresh Error */
-      //Error_Handler();
-    }
+  else {
+    #if PIN_EXISTS(LED) && DISABLED(PINS_DEBUGGING)
+      TOGGLE(LED_PIN);  // heartbeat indicator
+    #endif
   }
+}
+
+void HAL_watchdog_refresh() {
+  /* Refresh IWDG: reload counter */
+  if (HAL_IWDG_Refresh(&hiwdg) != HAL_OK) {
+    /* Refresh Error */
+    //Error_Handler();
+  }
+}
 
 #endif // USE_WATCHDOG
 #endif // STM32GENERIC && (STM32F4 || STM32F7)
diff --git a/Marlin/src/HAL/TEENSY31_32/watchdog.cpp b/Marlin/src/HAL/TEENSY31_32/watchdog.cpp
index 9f7b70d9f9..5e21236129 100644
--- a/Marlin/src/HAL/TEENSY31_32/watchdog.cpp
+++ b/Marlin/src/HAL/TEENSY31_32/watchdog.cpp
@@ -27,9 +27,11 @@
 
 #include "watchdog.h"
 
+#define WDT_TIMEOUT_MS TERN(WATCHDOG_DURATION_8S, 8000, 4000) // 4 or 8 second timeout
+
 void watchdog_init() {
   WDOG_TOVALH = 0;
-  WDOG_TOVALL = 4000;
+  WDOG_TOVALL = WDT_TIMEOUT_MS;
   WDOG_STCTRLH = WDOG_STCTRLH_WDOGEN;
 }
 
diff --git a/Marlin/src/HAL/TEENSY35_36/watchdog.cpp b/Marlin/src/HAL/TEENSY35_36/watchdog.cpp
index e735ee7923..3825e27928 100644
--- a/Marlin/src/HAL/TEENSY35_36/watchdog.cpp
+++ b/Marlin/src/HAL/TEENSY35_36/watchdog.cpp
@@ -27,9 +27,11 @@
 
 #include "watchdog.h"
 
+#define WDT_TIMEOUT_MS TERN(WATCHDOG_DURATION_8S, 8000, 4000) // 4 or 8 second timeout
+
 void watchdog_init() {
   WDOG_TOVALH = 0;
-  WDOG_TOVALL = 4000;
+  WDOG_TOVALL = WDT_TIMEOUT_MS;
   WDOG_STCTRLH = WDOG_STCTRLH_WDOGEN;
 }
 
diff --git a/Marlin/src/HAL/TEENSY40_41/watchdog.cpp b/Marlin/src/HAL/TEENSY40_41/watchdog.cpp
index 8b05ddb153..dd7c0aa92f 100644
--- a/Marlin/src/HAL/TEENSY40_41/watchdog.cpp
+++ b/Marlin/src/HAL/TEENSY40_41/watchdog.cpp
@@ -19,31 +19,27 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#ifdef __IMXRT1062__
 
 /**
  * HAL Watchdog for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A)
  */
 
-#ifdef __IMXRT1062__
-
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(USE_WATCHDOG)
 
 #include "watchdog.h"
 
-// 4 seconds timeout
-#define WDTO 4 //seconds
+#define WDT_TIMEOUT TERN(WATCHDOG_DURATION_8S, 8, 4) // 4 or 8 second timeout
 
-uint8_t timeoutval = (WDTO - 0.5f) / 0.5f;
+constexpr uint8_t timeoutval = (WDT_TIMEOUT - 0.5f) / 0.5f;
 
 void watchdog_init() {
-
   CCM_CCGR3 |= CCM_CCGR3_WDOG1(3);  // enable WDOG1 clocks
   WDOG1_WMCR = 0;                   // disable power down PDE
   WDOG1_WCR |= WDOG_WCR_SRS | WDOG_WCR_WT(timeoutval);
   WDOG1_WCR |= WDOG_WCR_WDE | WDOG_WCR_WDT | WDOG_WCR_SRE;
-
 }
 
 void HAL_watchdog_refresh() {
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index e395bdccb8..be3dcdd109 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -248,7 +248,7 @@ bool wait_for_heatup = true;
   bool wait_for_user; // = false;
 
   void wait_for_user_response(millis_t ms/*=0*/, const bool no_sleep/*=false*/) {
-    TERN(ADVANCED_PAUSE_FEATURE,,UNUSED(no_sleep));
+    UNUSED(no_sleep);
     KEEPALIVE_STATE(PAUSED_FOR_USER);
     wait_for_user = true;
     if (ms) ms += millis(); // expire time
diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index a1e39f9ae8..efccc3716d 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -69,49 +69,50 @@
 #define BOARD_MKS_GEN_L               1113  // MKS GEN L
 #define BOARD_KFB_2                   1114  // BigTreeTech or BIQU KFB2.0
 #define BOARD_ZRIB_V20                1115  // zrib V2.0 control board (Chinese knock off RAMPS replica)
-#define BOARD_FELIX2                  1116  // Felix 2.0+ Electronics Board (RAMPS like)
-#define BOARD_RIGIDBOARD              1117  // Invent-A-Part RigidBoard
-#define BOARD_RIGIDBOARD_V2           1118  // Invent-A-Part RigidBoard V2
-#define BOARD_SAINSMART_2IN1          1119  // Sainsmart 2-in-1 board
-#define BOARD_ULTIMAKER               1120  // Ultimaker
-#define BOARD_ULTIMAKER_OLD           1121  // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-#define BOARD_AZTEEG_X3               1122  // Azteeg X3
-#define BOARD_AZTEEG_X3_PRO           1123  // Azteeg X3 Pro
-#define BOARD_ULTIMAIN_2              1124  // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-#define BOARD_RUMBA                   1125  // Rumba
-#define BOARD_RUMBA_RAISE3D           1126  // Raise3D N series Rumba derivative
-#define BOARD_RL200                   1127  // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
-#define BOARD_FORMBOT_TREX2PLUS       1128  // Formbot T-Rex 2 Plus
-#define BOARD_FORMBOT_TREX3           1129  // Formbot T-Rex 3
-#define BOARD_FORMBOT_RAPTOR          1130  // Formbot Raptor
-#define BOARD_FORMBOT_RAPTOR2         1131  // Formbot Raptor 2
-#define BOARD_BQ_ZUM_MEGA_3D          1132  // bq ZUM Mega 3D
-#define BOARD_MAKEBOARD_MINI          1133  // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-#define BOARD_TRIGORILLA_13           1134  // TriGorilla Anycubic version 1.3-based on RAMPS EFB
-#define BOARD_TRIGORILLA_14           1135  //   ... Ver 1.4
-#define BOARD_TRIGORILLA_14_11        1136  //   ... Rev 1.1 (new servo pin order)
-#define BOARD_RAMPS_ENDER_4           1137  // Creality: Ender-4, CR-8
-#define BOARD_RAMPS_CREALITY          1138  // Creality: CR10S, CR20, CR-X
-#define BOARD_DAGOMA_F5               1139  // Dagoma F5
-#define BOARD_FYSETC_F6_13            1140  // FYSETC F6 1.3
-#define BOARD_FYSETC_F6_14            1141  // FYSETC F6 1.4
-#define BOARD_DUPLICATOR_I3_PLUS      1142  // Wanhao Duplicator i3 Plus
-#define BOARD_VORON                   1143  // VORON Design
-#define BOARD_TRONXY_V3_1_0           1144  // Tronxy TRONXY-V3-1.0
-#define BOARD_Z_BOLT_X_SERIES         1145  // Z-Bolt X Series
-#define BOARD_TT_OSCAR                1146  // TT OSCAR
-#define BOARD_OVERLORD                1147  // Overlord/Overlord Pro
-#define BOARD_HJC2560C_REV1           1148  // ADIMLab Gantry v1
-#define BOARD_HJC2560C_REV2           1149  // ADIMLab Gantry v2
-#define BOARD_TANGO                   1150  // BIQU Tango V1
-#define BOARD_MKS_GEN_L_V2            1151  // MKS GEN L V2
-#define BOARD_MKS_GEN_L_V21           1152  // MKS GEN L V2.1
-#define BOARD_COPYMASTER_3D           1153  // Copymaster 3D
-#define BOARD_ORTUR_4                 1154  // Ortur 4
-#define BOARD_TENLOG_D3_HERO          1155  // Tenlog D3 Hero IDEX printer
-#define BOARD_RAMPS_S_12_EEFB         1156  // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
-#define BOARD_RAMPS_S_12_EEEB         1157  // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
-#define BOARD_RAMPS_S_12_EFFB         1158  // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
+#define BOARD_ZRIB_V52                1116  // zrib V5.2 control board (Chinese knock off RAMPS replica)
+#define BOARD_FELIX2                  1117  // Felix 2.0+ Electronics Board (RAMPS like)
+#define BOARD_RIGIDBOARD              1118  // Invent-A-Part RigidBoard
+#define BOARD_RIGIDBOARD_V2           1119  // Invent-A-Part RigidBoard V2
+#define BOARD_SAINSMART_2IN1          1120  // Sainsmart 2-in-1 board
+#define BOARD_ULTIMAKER               1121  // Ultimaker
+#define BOARD_ULTIMAKER_OLD           1122  // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+#define BOARD_AZTEEG_X3               1123  // Azteeg X3
+#define BOARD_AZTEEG_X3_PRO           1124  // Azteeg X3 Pro
+#define BOARD_ULTIMAIN_2              1125  // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+#define BOARD_RUMBA                   1126  // Rumba
+#define BOARD_RUMBA_RAISE3D           1127  // Raise3D N series Rumba derivative
+#define BOARD_RL200                   1128  // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
+#define BOARD_FORMBOT_TREX2PLUS       1129  // Formbot T-Rex 2 Plus
+#define BOARD_FORMBOT_TREX3           1130  // Formbot T-Rex 3
+#define BOARD_FORMBOT_RAPTOR          1131  // Formbot Raptor
+#define BOARD_FORMBOT_RAPTOR2         1132  // Formbot Raptor 2
+#define BOARD_BQ_ZUM_MEGA_3D          1133  // bq ZUM Mega 3D
+#define BOARD_MAKEBOARD_MINI          1134  // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+#define BOARD_TRIGORILLA_13           1135  // TriGorilla Anycubic version 1.3-based on RAMPS EFB
+#define BOARD_TRIGORILLA_14           1136  //   ... Ver 1.4
+#define BOARD_TRIGORILLA_14_11        1137  //   ... Rev 1.1 (new servo pin order)
+#define BOARD_RAMPS_ENDER_4           1138  // Creality: Ender-4, CR-8
+#define BOARD_RAMPS_CREALITY          1139  // Creality: CR10S, CR20, CR-X
+#define BOARD_DAGOMA_F5               1140  // Dagoma F5
+#define BOARD_FYSETC_F6_13            1141  // FYSETC F6 1.3
+#define BOARD_FYSETC_F6_14            1142  // FYSETC F6 1.4
+#define BOARD_DUPLICATOR_I3_PLUS      1143  // Wanhao Duplicator i3 Plus
+#define BOARD_VORON                   1144  // VORON Design
+#define BOARD_TRONXY_V3_1_0           1145  // Tronxy TRONXY-V3-1.0
+#define BOARD_Z_BOLT_X_SERIES         1146  // Z-Bolt X Series
+#define BOARD_TT_OSCAR                1147  // TT OSCAR
+#define BOARD_OVERLORD                1148  // Overlord/Overlord Pro
+#define BOARD_HJC2560C_REV1           1149  // ADIMLab Gantry v1
+#define BOARD_HJC2560C_REV2           1150  // ADIMLab Gantry v2
+#define BOARD_TANGO                   1151  // BIQU Tango V1
+#define BOARD_MKS_GEN_L_V2            1152  // MKS GEN L V2
+#define BOARD_MKS_GEN_L_V21           1153  // MKS GEN L V2.1
+#define BOARD_COPYMASTER_3D           1154  // Copymaster 3D
+#define BOARD_ORTUR_4                 1155  // Ortur 4
+#define BOARD_TENLOG_D3_HERO          1156  // Tenlog D3 Hero IDEX printer
+#define BOARD_RAMPS_S_12_EEFB         1157  // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
+#define BOARD_RAMPS_S_12_EEEB         1158  // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
+#define BOARD_RAMPS_S_12_EFFB         1159  // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
 
 //
 // RAMBo and derivatives
@@ -378,6 +379,7 @@
 #define BOARD_MRR_ESPA                6001  // MRR ESPA board based on ESP32 (native pins only)
 #define BOARD_MRR_ESPE                6002  // MRR ESPE board based on ESP32 (with I2S stepper stream)
 #define BOARD_E4D_BOX                 6003  // E4d@BOX
+#define BOARD_FYSETC_E4               6004  // FYSETC E4
 
 //
 // SAMD51 ARM Cortex M4
diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h
index 7948e8ce87..7985706173 100644
--- a/Marlin/src/core/macros.h
+++ b/Marlin/src/core/macros.h
@@ -196,6 +196,9 @@
 #define __TERN(T,V...)      ___TERN(_CAT(_NO,T),V)  // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
 #define ___TERN(P,V...)     THIRD(P,V)              // If first argument has a comma, A. Else B.
 
+#define IF_ENABLED          TERN_
+#define IF_DISABLED(O,A)    TERN(O,,A)
+
 #define ANY(V...)          !DISABLED(V)
 #define NONE(V...)          DISABLED(V)
 #define ALL(V...)           ENABLED(V)
diff --git a/Marlin/src/core/multi_language.h b/Marlin/src/core/multi_language.h
index 5852c439a8..6af4af2f8d 100644
--- a/Marlin/src/core/multi_language.h
+++ b/Marlin/src/core/multi_language.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 #pragma once
 
diff --git a/Marlin/src/feature/backlash.h b/Marlin/src/feature/backlash.h
index 8d00570f99..49857f1f99 100644
--- a/Marlin/src/feature/backlash.h
+++ b/Marlin/src/feature/backlash.h
@@ -54,17 +54,17 @@ public:
   #endif
 
   static inline float get_measurement(const AxisEnum a) {
+    UNUSED(a);
     // Return the measurement averaged over all readings
     return TERN(MEASURE_BACKLASH_WHEN_PROBING
       , measured_count[a] > 0 ? measured_mm[a] / measured_count[a] : 0
       , 0
     );
-    TERN(MEASURE_BACKLASH_WHEN_PROBING,,UNUSED(a));
   }
 
   static inline bool has_measurement(const AxisEnum a) {
+    UNUSED(a);
     return TERN0(MEASURE_BACKLASH_WHEN_PROBING, measured_count[a] > 0);
-    TERN(MEASURE_BACKLASH_WHEN_PROBING,,UNUSED(a));
   }
 
   static inline bool has_any_measurement() {
diff --git a/Marlin/src/feature/leds/neopixel.h b/Marlin/src/feature/leds/neopixel.h
index 42046fa563..d7354207fc 100644
--- a/Marlin/src/feature/leds/neopixel.h
+++ b/Marlin/src/feature/leds/neopixel.h
@@ -110,7 +110,7 @@ public:
       #if CONJOINED_NEOPIXEL
         adaneo2.show();
       #else
-        TERN(NEOPIXEL2_SEPARATE,,adaneo1.setPin(NEOPIXEL2_PIN));
+        IF_DISABLED(NEOPIXEL2_SEPARATE, adaneo1.setPin(NEOPIXEL2_PIN));
         adaneo1.show();
         adaneo1.setPin(NEOPIXEL_PIN);
       #endif
diff --git a/Marlin/src/feature/tramming.h b/Marlin/src/feature/tramming.h
new file mode 100644
index 0000000000..79f7407716
--- /dev/null
+++ b/Marlin/src/feature/tramming.h
@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../inc/MarlinConfigPre.h"
+
+#if !WITHIN(TRAMMING_SCREW_THREAD, 30, 51) || TRAMMING_SCREW_THREAD % 10 > 1
+  #error "TRAMMING_SCREW_THREAD must be equal to 30, 31, 40, 41, 50, or 51."
+#endif
+
+constexpr xy_pos_t screws_tilt_adjust_pos[] = TRAMMING_POINT_XY;
+
+#define G35_PROBE_COUNT COUNT(screws_tilt_adjust_pos)
+static_assert(G35_PROBE_COUNT >= 3, "TRAMMING_POINT_XY requires at least 3 XY positions.");
+
+extern const char point_name_1[], point_name_2[], point_name_3[]
+  #ifdef TRAMMING_POINT_NAME_4
+    , point_name_4[]
+    #ifdef TRAMMING_POINT_NAME_5
+      , point_name_5[]
+    #endif
+  #endif
+;
+
+#define _NR_TRAM_NAMES 2
+#ifdef TRAMMING_POINT_NAME_3
+  #undef _NR_TRAM_NAMES
+  #define _NR_TRAM_NAMES 3
+  #ifdef TRAMMING_POINT_NAME_4
+    #undef _NR_TRAM_NAMES
+    #define _NR_TRAM_NAMES 4
+    #ifdef TRAMMING_POINT_NAME_5
+      #undef _NR_TRAM_NAMES
+      #define _NR_TRAM_NAMES 5
+    #endif
+  #endif
+#endif
+static_assert(_NR_TRAM_NAMES >= G35_PROBE_COUNT, "Define enough TRAMMING_POINT_NAME_s for all TRAMMING_POINT_XY entries.");
+#undef _NR_TRAM_NAMES
+
+extern PGM_P const tramming_point_name[];
diff --git a/Marlin/src/gcode/bedlevel/G35.cpp b/Marlin/src/gcode/bedlevel/G35.cpp
index b39a7b9ed8..f0abc543cb 100755
--- a/Marlin/src/gcode/bedlevel/G35.cpp
+++ b/Marlin/src/gcode/bedlevel/G35.cpp
@@ -36,19 +36,23 @@
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
 #include "../../core/debug_out.h"
 
-constexpr xy_pos_t screws_tilt_adjust_pos[] = TRAMMING_POINT_XY;
+//
+// Define tramming point names.
+//
 
-static PGMSTR(point_name_1, TRAMMING_POINT_NAME_1);
-static PGMSTR(point_name_2, TRAMMING_POINT_NAME_2);
-static PGMSTR(point_name_3, TRAMMING_POINT_NAME_3);
+#include "../../feature/tramming.h" // Validate
+
+PGMSTR(point_name_1, TRAMMING_POINT_NAME_1);
+PGMSTR(point_name_2, TRAMMING_POINT_NAME_2);
+PGMSTR(point_name_3, TRAMMING_POINT_NAME_3);
 #ifdef TRAMMING_POINT_NAME_4
-  static PGMSTR(point_name_4, TRAMMING_POINT_NAME_4);
+  PGMSTR(point_name_4, TRAMMING_POINT_NAME_4);
   #ifdef TRAMMING_POINT_NAME_5
-    static PGMSTR(point_name_5, TRAMMING_POINT_NAME_5);
+    PGMSTR(point_name_5, TRAMMING_POINT_NAME_5);
   #endif
 #endif
 
-static PGM_P const tramming_point_name[] PROGMEM = {
+PGM_P const tramming_point_name[] PROGMEM = {
   point_name_1, point_name_2, point_name_3
   #ifdef TRAMMING_POINT_NAME_4
     , point_name_4
@@ -58,14 +62,6 @@ static PGM_P const tramming_point_name[] PROGMEM = {
   #endif
 };
 
-#define G35_PROBE_COUNT COUNT(screws_tilt_adjust_pos)
-
-#if !WITHIN(TRAMMING_SCREW_THREAD, 30, 51) || TRAMMING_SCREW_THREAD % 10 > 1
-  #error "TRAMMING_SCREW_THREAD must be equal to 30, 31, 40, 41, 50, or 51."
-#endif
-
-static_assert(G35_PROBE_COUNT > 2, "TRAMMING_POINT_XY requires at least 3 XY positions.");
-
 /**
  * G35: Read bed corners to help adjust bed screws
  *
diff --git a/Marlin/src/gcode/control/M3-M5.cpp b/Marlin/src/gcode/control/M3-M5.cpp
index 6f2409f69f..4ca103da5b 100644
--- a/Marlin/src/gcode/control/M3-M5.cpp
+++ b/Marlin/src/gcode/control/M3-M5.cpp
@@ -113,7 +113,7 @@ void GcodeSuite::M3_M4(const bool is_M4) {
     else
       cutter.set_power(cutter.upower_to_ocr(get_s_power()));
   #elif ENABLED(SPINDLE_SERVO)
-    cutter.set_power(get_s_power()); 
+    cutter.set_power(get_s_power());
   #else
     cutter.set_enabled(true);
   #endif
diff --git a/Marlin/src/gcode/temp/M104_M109.cpp b/Marlin/src/gcode/temp/M104_M109.cpp
index d2b466e2fb..90e1b601e4 100644
--- a/Marlin/src/gcode/temp/M104_M109.cpp
+++ b/Marlin/src/gcode/temp/M104_M109.cpp
@@ -105,7 +105,7 @@ void GcodeSuite::M104() {
        * mode, for instance in a dual extruder setup, without affecting the running
        * print timer.
        */
-      thermalManager.check_timer_autostart(false, true);
+      thermalManager.auto_job_check_timer(false, true);
     #endif
   }
 
@@ -182,7 +182,7 @@ void GcodeSuite::M109() {
        * standby mode, (e.g., in a dual extruder setup) without affecting
        * the running print timer.
        */
-      thermalManager.check_timer_autostart(true, true);
+      thermalManager.auto_job_check_timer(true, true);
     #endif
 
     #if HAS_DISPLAY
diff --git a/Marlin/src/gcode/temp/M140_M190.cpp b/Marlin/src/gcode/temp/M140_M190.cpp
index ac8228085e..d684127fe1 100644
--- a/Marlin/src/gcode/temp/M140_M190.cpp
+++ b/Marlin/src/gcode/temp/M140_M190.cpp
@@ -81,7 +81,7 @@ void GcodeSuite::M140() {
        * temperatures need to be set below mintemp. Order of M140, M104, and M141
        * at the end of the print does not matter.
        */
-      thermalManager.check_timer_autostart(false, true);
+      thermalManager.auto_job_check_timer(false, true);
     #endif
   }
 }
@@ -128,7 +128,7 @@ void GcodeSuite::M190() {
 
   thermalManager.setTargetBed(temp);
 
-  TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.check_timer_autostart(true, false));
+  TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(true, false));
 
   ui.set_status_P(thermalManager.isHeatingBed() ? GET_TEXT(MSG_BED_HEATING) : GET_TEXT(MSG_BED_COOLING));
 
diff --git a/Marlin/src/gcode/temp/M141_M191.cpp b/Marlin/src/gcode/temp/M141_M191.cpp
index fc80c5f4cb..17eb71eada 100644
--- a/Marlin/src/gcode/temp/M141_M191.cpp
+++ b/Marlin/src/gcode/temp/M141_M191.cpp
@@ -60,7 +60,7 @@ void GcodeSuite::M141() {
        * temperatures need to be set below mintemp. Order of M140, M104, and M141
        * at the end of the print does not matter.
        */
-      thermalManager.check_timer_autostart(false, true);
+      thermalManager.auto_job_check_timer(false, true);
     #endif
   }
 }
@@ -75,7 +75,7 @@ void GcodeSuite::M191() {
   const bool no_wait_for_cooling = parser.seenval('S');
   if (no_wait_for_cooling || parser.seenval('R')) {
     thermalManager.setTargetChamber(parser.value_celsius());
-    TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.check_timer_autostart(true, false));
+    TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(true, false));
   }
   else return;
 
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 6f632aa569..98aa4afb8c 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -235,7 +235,7 @@
   #define BOARD_ST7920_DELAY_2 DELAY_NS(125)
   #define BOARD_ST7920_DELAY_3 DELAY_NS(125)
 
-#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, BQ_LCD_SMART_CONTROLLER)
+#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, ANET_FULL_GRAPHICS_LCD_ALT_WIRING, BQ_LCD_SMART_CONTROLLER)
 
   #define IS_RRD_FG_SC 1
 
@@ -675,6 +675,10 @@
   #define HAS_BED_PROBE 1
 #endif
 
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
+  #undef PROBE_MANUALLY
+#endif
+
 #if ANY(HAS_BED_PROBE, PROBE_MANUALLY, MESH_BED_LEVELING)
   #define PROBE_SELECTED 1
 #endif
@@ -747,6 +751,7 @@
   #define HAS_PROBING_PROCEDURE 1
 #endif
 #if !HAS_LEVELING
+  #undef PROBE_MANUALLY
   #undef RESTORE_LEVELING_AFTER_G28
 #endif
 
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index cadf84abd1..b6ff725470 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1382,9 +1382,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
    * Unified Bed Leveling
    */
 
-  // Hide PROBE_MANUALLY from the rest of the code
-  #undef PROBE_MANUALLY
-
   #if IS_SCARA
     #error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers."
   #elif DISABLED(EEPROM_SETTINGS)
@@ -1410,13 +1407,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 
 #elif ENABLED(MESH_BED_LEVELING)
 
-  // Hide PROBE_MANUALLY from the rest of the code
-  #undef PROBE_MANUALLY
-
-  /**
-   * Mesh Bed Leveling
-   */
-
+  // Mesh Bed Leveling
   #if ENABLED(DELTA)
     #error "MESH_BED_LEVELING is not compatible with DELTA printers."
   #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
@@ -1950,7 +1941,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 #endif
 
 // Delta and Cartesian use 3 homing endstops
-#if !IS_SCARA
+#if NONE(IS_SCARA, SPI_ENDSTOPS)
   #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
     #error "Enable USE_XMIN_PLUG when homing X to MIN."
   #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
@@ -2229,7 +2220,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   + COUNT_ENABLED(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C) \
   + COUNT_ENABLED(VIKI2, miniVIKI) \
   + COUNT_ENABLED(ZONESTAR_12864LCD, ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306) \
-  + ENABLED(ANET_FULL_GRAPHICS_LCD) \
+  + COUNT_ENABLED(ANET_FULL_GRAPHICS_LCD, ANET_FULL_GRAPHICS_LCD_ALT_WIRING) \
   + ENABLED(AZSMZ_12864) \
   + ENABLED(BQ_LCD_SMART_CONTROLLER) \
   + ENABLED(CARTESIO_UI) \
@@ -2303,6 +2294,20 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #error "GRAPHICAL_TFT_UPSCALE must be set to 2 or 3."
 #endif
 
+/**
+ * Some boards forbid the use of -1 Native USB
+ */
+#if ENABLED(BOARD_NO_NATIVE_USB)
+  #undef BOARD_NO_NATIVE_USB
+  #if SERIAL_PORT == -1
+    #error "SERIAL_PORT is set to -1, but the MOTHERBOARD has no native USB support. Set SERIAL_PORT to a valid value for your board."
+  #elif SERIAL_PORT_2 == -1
+    #error "SERIAL_PORT_2 is set to -1, but the MOTHERBOARD has no native USB support. Set SERIAL_PORT_2 to a valid value for your board."
+  #elif LCD_SERIAL_PORT == -1
+    #error "LCD_SERIAL_PORT is set to -1, but the MOTHERBOARD has no native USB support. Set LCD_SERIAL_PORT to a valid value for your board."
+  #endif
+#endif
+
 /**
  * Serial displays require a dedicated serial port
  */
@@ -2505,56 +2510,68 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #define Y_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Y,TMC2209)
   #define Z_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Z,TMC2209)
 
+  #if NONE(SPI_ENDSTOPS, ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS)
+    #if   X_SENSORLESS && X_HOME_DIR < 0 && DISABLED(ENDSTOPPULLUP_XMIN)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMIN (or ENDSTOPPULLUPS) when homing to X_MIN."
+    #elif X_SENSORLESS && X_HOME_DIR > 0 && DISABLED(ENDSTOPPULLUP_XMAX)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMAX (or ENDSTOPPULLUPS) when homing to X_MAX."
+    #elif Y_SENSORLESS && Y_HOME_DIR < 0 && DISABLED(ENDSTOPPULLUP_YMIN)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMIN (or ENDSTOPPULLUPS) when homing to Y_MIN."
+    #elif Y_SENSORLESS && Y_HOME_DIR > 0 && DISABLED(ENDSTOPPULLUP_YMAX)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMAX (or ENDSTOPPULLUPS) when homing to Y_MAX."
+    #elif Z_SENSORLESS && Z_HOME_DIR < 0 && DISABLED(ENDSTOPPULLUP_ZMIN)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMIN (or ENDSTOPPULLUPS) when homing to Z_MIN."
+    #elif Z_SENSORLESS && Z_HOME_DIR > 0 && DISABLED(ENDSTOPPULLUP_ZMAX)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMAX (or ENDSTOPPULLUPS) when homing to Z_MAX."
+    #endif
+  #endif
+
+  #if ENABLED(SPI_ENDSTOPS)
+    #if ENABLED(QUICK_HOME)
+      #warning "SPI_ENDSTOPS may be unreliable with QUICK_HOME. Adjust back-offs for better results."
+    #endif
+  #else
+    #if X_SENSORLESS && X_HOME_DIR < 0 && X_MIN_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
+      #if X_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = true when homing to X_MIN."
+      #else
+        #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to X_MIN."
+      #endif
+    #elif X_SENSORLESS && X_HOME_DIR > 0 && X_MAX_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
+      #if X_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = true when homing to X_MAX."
+      #else
+        #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to X_MAX."
+      #endif
+    #elif Y_SENSORLESS && Y_HOME_DIR < 0 && Y_MIN_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
+      #if Y_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = true when homing to Y_MIN."
+      #else
+        #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MIN."
+      #endif
+    #elif Y_SENSORLESS && Y_HOME_DIR > 0 && Y_MAX_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
+      #if Y_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = true when homing to Y_MAX."
+      #else
+        #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MAX."
+      #endif
+    #elif Z_SENSORLESS && Z_HOME_DIR < 0 && Z_MIN_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
+      #if Z_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = true when homing to Z_MIN."
+      #else
+        #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MIN."
+      #endif
+    #elif Z_SENSORLESS && Z_HOME_DIR > 0 && Z_MAX_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
+      #if Z_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = true when homing to Z_MAX."
+      #else
+        #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MAX."
+      #endif
+    #endif
+  #endif
+
   #if ENABLED(DELTA) && !BOTH(STEALTHCHOP_XY, STEALTHCHOP_Z)
     #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP_XY and STEALTHCHOP_Z."
-  #elif X_SENSORLESS && X_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_XMIN)
-    #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMIN (or ENDSTOPPULLUPS) when homing to X_MIN."
-  #elif X_SENSORLESS && X_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_XMAX)
-    #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMAX (or ENDSTOPPULLUPS) when homing to X_MAX."
-  #elif Y_SENSORLESS && Y_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_YMIN)
-    #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMIN (or ENDSTOPPULLUPS) when homing to Y_MIN."
-  #elif Y_SENSORLESS && Y_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_YMAX)
-    #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMAX (or ENDSTOPPULLUPS) when homing to Y_MAX."
-  #elif Z_SENSORLESS && Z_HOME_DIR < 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMIN)
-    #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMIN (or ENDSTOPPULLUPS) when homing to Z_MIN."
-  #elif Z_SENSORLESS && Z_HOME_DIR > 0 && NONE(ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS, ENDSTOPPULLUP_ZMAX)
-    #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMAX (or ENDSTOPPULLUPS) when homing to Z_MAX."
-  #elif X_SENSORLESS && X_HOME_DIR < 0 && X_MIN_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
-    #if X_ENDSTOP_INVERTING
-      #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = true when homing to X_MIN."
-    #else
-      #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to X_MIN."
-    #endif
-  #elif X_SENSORLESS && X_HOME_DIR > 0 && X_MAX_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
-    #if X_ENDSTOP_INVERTING
-      #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = true when homing to X_MAX."
-    #else
-      #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to X_MAX."
-    #endif
-  #elif Y_SENSORLESS && Y_HOME_DIR < 0 && Y_MIN_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
-    #if Y_ENDSTOP_INVERTING
-      #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = true when homing to Y_MIN."
-    #else
-      #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MIN."
-    #endif
-  #elif Y_SENSORLESS && Y_HOME_DIR > 0 && Y_MAX_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
-    #if Y_ENDSTOP_INVERTING
-      #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = true when homing to Y_MAX."
-    #else
-      #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MAX."
-    #endif
-  #elif Z_SENSORLESS && Z_HOME_DIR < 0 && Z_MIN_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
-    #if Z_ENDSTOP_INVERTING
-      #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = true when homing to Z_MIN."
-    #else
-      #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MIN."
-    #endif
-  #elif Z_SENSORLESS && Z_HOME_DIR > 0 && Z_MAX_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
-    #if Z_ENDSTOP_INVERTING
-      #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = true when homing to Z_MAX."
-    #else
-      #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MAX."
-    #endif
   #elif ENDSTOP_NOISE_THRESHOLD
     #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_THRESHOLD."
   #elif !(X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS)
diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h
index fa505310ef..2cabf66bad 100644
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-11-04"
+  #define STRING_DISTRIBUTION_DATE "2020-11-08"
 #endif
 
 /**
diff --git a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp
index 0aba49d564..480721e56a 100644
--- a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp
+++ b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp
@@ -123,7 +123,7 @@ bool MarlinUI::detected() { return true; }
           custom_start_bmp
         #endif
       ;
-      TERN(CUSTOM_BOOTSCREEN_ANIMATED,,UNUSED(frame));
+      UNUSED(frame);
 
       u8g.drawBitmapP(left, top, CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH, CUSTOM_BOOTSCREEN_BMPHEIGHT, bmp);
 
diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
index d07474d810..85654b9189 100644
--- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
@@ -104,6 +104,9 @@
 
 #if DO_DRAW_HOTENDS
   #define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
+#endif
+
+#if EITHER(DO_DRAW_BED, DO_DRAW_HOTENDS)
   #define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)
 #endif
 
diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.cpp b/Marlin/src/lcd/dwin/e3v2/dwin.cpp
index 5c6022d09e..fe2397fa6b 100644
--- a/Marlin/src/lcd/dwin/e3v2/dwin.cpp
+++ b/Marlin/src/lcd/dwin/e3v2/dwin.cpp
@@ -2144,7 +2144,7 @@ void HMI_Printing() {
             #endif
           #endif
 
-          strcat_P(cmd, PSTR("M24"));
+          strcat_P(cmd, M24_STR);
           queue.inject(cmd);
         }
         else {
diff --git a/Marlin/src/lcd/extui/example.cpp b/Marlin/src/lcd/extui/example.cpp
index a5ef5652bc..592d67214d 100644
--- a/Marlin/src/lcd/extui/example.cpp
+++ b/Marlin/src/lcd/extui/example.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../../inc/MarlinConfigPre.h"
diff --git a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
index e2f2fd9346..467444c214 100644
--- a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
+++ b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.cpp
@@ -26,7 +26,7 @@
 
 #if ENABLED(DGUS_LCD_UI_FYSETC)
 
-#include "../DGUSDisplayDef.h"
+#include "DGUSDisplayDef.h"
 #include "../DGUSDisplay.h"
 #include "../DGUSScreenHandler.h"
 
diff --git a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.h b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.h
index f6a65fe8a0..910f5f7791 100644
--- a/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.h
+++ b/Marlin/src/lcd/extui/lib/dgus/fysetc/DGUSDisplayDef.h
@@ -21,6 +21,8 @@
  */
 #pragma once
 
+#include "../DGUSDisplayDef.h"
+
 enum DGUSLCD_Screens : uint8_t {
   DGUSLCD_SCREEN_BOOT                =   0,
   DGUSLCD_SCREEN_MAIN                =   1,
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
index 2c466ffd04..a64c237fa1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../compat.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.h
index 3edc2a9de1..eef8cf8677 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 class SPIFlash {
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
index 46683401dc..8d2d74ea26 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../compat.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h
index fcaa610e8b..be393a952c 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/compat.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/compat.h
index 11ad0798b5..741b7076d1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/compat.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/compat.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/config.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/config.h
index 7476c9e67e..76b231536b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/config.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/config.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
index c09d10f148..6bb920885a 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
index bb95411e06..f64f2b5b5f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_basic.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.h
index a9fdb5c5c7..74a7f29800 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
   /****************************************************************************
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/constants.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/constants.h
index 1e6642fedc..507e251518 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/constants.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/constants.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /****************************************************************************
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/ftdi_basic.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/ftdi_basic.h
index 75a2d54fca..47cd698253 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/ftdi_basic.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/ftdi_basic.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft800.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft800.h
index 4063bf2d5d..26053709d3 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft800.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft800.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /****************************************************************************
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft810.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft810.h
index 448717b478..e57d11c3a7 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft810.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/registers_ft810.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /****************************************************************************
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
index 8d455907e9..d90fc1e8f0 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
index d91d08fbfa..a9b46e013b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_basic.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
index 30ec786c60..e3a23d768f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
index 436c67edf2..0f4bbbdb9a 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
@@ -12,7 +12,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
@@ -253,6 +253,9 @@
   #define __TERN(T,V...)      ___TERN(_CAT(_NO,T),V)  // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
   #define ___TERN(P,V...)     THIRD(P,V)              // If first argument has a comma, A. Else B.
 
+  #define IF_ENABLED          TERN_
+  #define IF_DISABLED(O,A)    _TERN(_ENA_1(O),,A)
+
   #define ANY(V...)          !DISABLED(V)
   #define NONE(V...)          DISABLED(V)
   #define ALL(V...)           ENABLED(V)
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/bitmap_info.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/bitmap_info.h
index b763c890c2..73260703c2 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/bitmap_info.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/bitmap_info.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.cpp
index 7224b681bb..a7777a97fe 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h
index 94ccbb7a60..b27ed7f59e 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.cpp
index baed9f8502..9f2b6dd35f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.h
index da927aeae2..44934f909a 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/dl_cache.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
index 3dd2b88b19..0808f2f4f2 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.h
index d9bede92df..c5f08297be 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/ftdi_extended.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/ftdi_extended.h
index 6e4d0668fe..006978babb 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/ftdi_extended.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/ftdi_extended.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/grid_layout.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/grid_layout.h
index e3c3ebb39d..490cbd4e54 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/grid_layout.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/grid_layout.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/polygon.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/polygon.h
index 7da6213211..202c3cd7fb 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/polygon.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/polygon.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/rgb_t.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/rgb_t.h
index 2b18244e22..62762ee964 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/rgb_t.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/rgb_t.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.cpp
index 57a9e3e89b..81a081faae 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.h
index d1f84c8a6e..ef92361498 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/screen_types.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
index fbdfe2fe99..20df15a91e 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp
index 6a5b6e3cf8..481589854b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h
index e2650b10ae..fcfe70bd76 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_player.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp
index 3616f15ab6..18e5d4bc5b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.h
index 261995147c..9d8cd44061 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp
index b2f62f060c..a69280f5fc 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.h
index 7852b7ec3e..a2d8aa9443 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_ellipsis.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.cpp
index 58ec96ac15..84233c5ce3 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.h
index 700da7bcf2..f64d033d52 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/tiny_timer.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.cpp
index c5126721ab..e288d27030 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.h
index f1e22e17dd..185b53e6ff 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_bitmaps.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.cpp
index 733cf8f660..0e251f7bb1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.h
index f5bf644ef9..a2cb8b25c9 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/font_size_t.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.cpp
index b50c12fc6d..b795e01d42 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.h
index 7decdfd38f..e320bd7344 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/standard_char_set.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 namespace FTDI {
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.cpp
index bee3f74cab..d21b7f0e7f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../ftdi_extended.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.h
index 16f7e197b5..566f212187 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/unicode.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.cpp
index 4aa2580c63..171637f03a 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../ftdi_extended.h"
@@ -435,7 +435,7 @@
       base_char   = base_special ? NO_DOT_I : std_char;
     }
 
-    // If cmd != NULL, draw the glyph to the screen
+    // If cmd != nullptr, draw the glyph to the screen
     if (cmd) {
       ext_vertex2ii(*cmd, x, y, base_special ? alt_font : std_font, base_char);
       if (accent_char)
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.h
index 2adad2327a..652bd6b2eb 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 namespace FTDI {
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set_bitmap_31.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set_bitmap_31.h
index 3426e1377d..3f85cf02aa 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set_bitmap_31.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/unicode/western_char_set_bitmap_31.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/circular_progress.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/circular_progress.h
index 5357de3ef3..6695134046 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/circular_progress.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/circular_progress.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
index a501de20ba..ba41650f2f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h
@@ -90,7 +90,7 @@ class PolyReader {
         if (start_x != eol)
           close_loop();
         else
-          p = NULL;
+          p = nullptr;
       }
       else {
         x = pgm_read_word_far(p++);
@@ -106,7 +106,7 @@ class PolyReader {
       }
     }
 
-    bool has_more()       { return p != NULL; }
+    bool has_more()       { return p != nullptr; }
     bool end_of_loop()    { return start_x == eol; }
 };
 
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/svg2cpp.py b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/svg2cpp.py
index da08014e89..c6eba3946c 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/svg2cpp.py
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/svg2cpp.py
@@ -56,7 +56,7 @@ header = '''
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/ftdi_eve_lib.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/ftdi_eve_lib.h
index 5c1a74f66e..c5ddbb4a61 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/ftdi_eve_lib.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/ftdi_eve_lib.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.cpp
index 912c95731d..e4ecdc8b49 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.h
index 873e84455a..cbc05c5aa3 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 #pragma once
 
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h
index ce60ab5090..807c816307 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
index fe68faefee..ed7e653af1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "compat.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
index 5ad84c60b0..ae95a64709 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp
index 9cd17637bd..952f0cac02 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp
index cfb268f0b4..1b7d043314 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/alert_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/alert_dialog_box.cpp
index bd09d2a5cd..89d9f05330 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/alert_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/alert_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/backlash_compensation_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/backlash_compensation_screen.cpp
index 8d65518455..58f4544ffc 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/backlash_compensation_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/backlash_compensation_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_numeric_adjustment_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_numeric_adjustment_screen.cpp
index 1c4ef594bb..10cbd3bc62 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_numeric_adjustment_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_numeric_adjustment_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_screen.cpp
index c84dd45f00..16b26e6821 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/base_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.cpp
index a11609dd97..eb8f742313 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_advanced_settings.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_advanced_settings.cpp
index 76ebdca587..b2611be250 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_advanced_settings.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_advanced_settings.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_e.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_e.cpp
index da772971ce..85885fb388 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_e.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_e.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_xyz.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_xyz.cpp
index 48ce320482..102631f18e 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_xyz.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_confirm_home_xyz.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_main_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_main_menu.cpp
index e2bb8a2414..5ddc2d02ae 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_main_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_main_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_landscape.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_landscape.h
index 9279fd7df0..4faddc64b1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_landscape.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_landscape.h
@@ -11,7 +11,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_portrait.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_portrait.h
index f03e3413f8..50fc5ab9f8 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_portrait.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printer_ui_portrait.h
@@ -11,7 +11,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
index c5e26da98a..fc6dc5ee57 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_printing_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_status_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_status_screen.cpp
index e881995f2e..2515732d43 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_status_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_status_screen.cpp
@@ -18,7 +18,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_tune_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_tune_menu.cpp
index 0d8d71b45c..9723abba09 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_tune_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bio_tune_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/boot_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/boot_screen.cpp
index 4ce8f608f1..e79f25fcb5 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/boot_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/boot_screen.cpp
@@ -18,7 +18,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/case_light_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/case_light_screen.cpp
index 776a9fe5f7..5b2b7d4116 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/case_light_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/case_light_screen.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/change_filament_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/change_filament_screen.cpp
index 60394d06df..3f85fc9320 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/change_filament_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/change_filament_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_abort_print_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_abort_print_dialog_box.cpp
index eb3e2a3e01..528d93d5d1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_abort_print_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_abort_print_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_auto_calibration_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_auto_calibration_dialog_box.cpp
index 7e1a82025d..f7c85672af 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_auto_calibration_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_auto_calibration_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_erase_flash_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_erase_flash_dialog_box.cpp
index 574de21088..baf5959c1b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_erase_flash_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_erase_flash_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_start_print_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_start_print_dialog_box.cpp
index 4e5b174d53..0dbee2414d 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_start_print_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_start_print_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp
index 6b6affadd5..93dfcba47d 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/confirm_user_request_alert_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/default_acceleration_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/default_acceleration_screen.cpp
index 8496955f73..203b2b037e 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/default_acceleration_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/default_acceleration_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/developer_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/developer_menu.cpp
index 8e56c4197b..3a5abf9449 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/developer_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/developer_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/dialog_box_base_class.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/dialog_box_base_class.cpp
index 782ae7bbc7..2ae3d7b049 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/dialog_box_base_class.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/dialog_box_base_class.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/display_tuning_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/display_tuning_screen.cpp
index 8845dfb5c0..1a4d9fd705 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/display_tuning_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/display_tuning_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/endstop_state_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/endstop_state_screen.cpp
index 7f3f507fd6..41f72e8e53 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/endstop_state_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/endstop_state_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/feedrate_percent_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/feedrate_percent_screen.cpp
index 2698708e51..28f0e6a731 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/feedrate_percent_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/feedrate_percent_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_menu.cpp
index 82ee118e4c..dfdba33b08 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_runout_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_runout_screen.cpp
index f1808bf20e..c281ccb050 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_runout_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/filament_runout_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp
index f4c224dbe8..90e3040079 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/files_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp
index c806ef499b..3f0e25f734 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_sounds_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_sounds_screen.cpp
index 25a44c1adb..8fb813e79f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_sounds_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_sounds_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/jerk_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/jerk_screen.cpp
index b96c2be7c8..9c751bc345 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/jerk_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/jerk_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/junction_deviation_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/junction_deviation_screen.cpp
index d365b12eb1..329fa6c97f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/junction_deviation_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/junction_deviation_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/kill_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/kill_screen.cpp
index d98324623c..273da348c1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/kill_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/kill_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/language_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/language_menu.cpp
index 5b4c1c9175..6c5dfcfa9f 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/language_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/language_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/leveling_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/leveling_menu.cpp
index a91d48c037..a202a611ec 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/leveling_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/leveling_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/linear_advance_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/linear_advance_screen.cpp
index 8a5c675fac..2feaa03295 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/linear_advance_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/linear_advance_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/lock_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/lock_screen.cpp
index 7854ce5e39..35bbd7ad90 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/lock_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/lock_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp
index 53e3ab00c7..17e15afc5c 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp
@@ -18,7 +18,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_acceleration_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_acceleration_screen.cpp
index 29ac2f1b40..fdbb9623b5 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_acceleration_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_acceleration_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_velocity_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_velocity_screen.cpp
index 2316f93ee2..ac1374b99a 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_velocity_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/max_velocity_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/media_player_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/media_player_screen.cpp
index d7e476e04e..8912663f27 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/media_player_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/media_player_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/move_axis_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/move_axis_screen.cpp
index 5dd3174821..06faf303e2 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/move_axis_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/move_axis_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nozzle_offsets_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nozzle_offsets_screen.cpp
index 07d6900c16..85c7206b04 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nozzle_offsets_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nozzle_offsets_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nudge_nozzle_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nudge_nozzle_screen.cpp
index ed3c8d999b..aac0f9a277 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nudge_nozzle_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nudge_nozzle_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_menu.cpp
index a8891162ea..03f9e2c465 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_menu.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_timer_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_timer_screen.cpp
index 69eecaf54b..c3110b77dc 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_timer_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/preheat_timer_screen.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/restore_failsafe_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/restore_failsafe_dialog_box.cpp
index 94b8ac0fb5..9be2239797 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/restore_failsafe_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/restore_failsafe_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/save_settings_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/save_settings_dialog_box.cpp
index f4a99accd6..350e2de7eb 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/save_settings_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/save_settings_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screen_data.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screen_data.h
index dc38890a0e..dab411a256 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screen_data.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screen_data.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.cpp
index 16aa682168..64927d58d9 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.h
index 71fc7d9ee3..7b062045f9 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/screens.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/spinner_dialog_box.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/spinner_dialog_box.cpp
index de7eb92a88..a4464c1e49 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/spinner_dialog_box.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/spinner_dialog_box.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/statistics_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/statistics_screen.cpp
index cb26324808..0e224da967 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/statistics_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/statistics_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
index fc7453fca7..8aef5dd413 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_bump_sensitivity_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_bump_sensitivity_screen.cpp
index 693d125fbf..84d76dcefa 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_bump_sensitivity_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_bump_sensitivity_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp
index 136582f09a..d6e36c1efa 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/steps_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/steps_screen.cpp
index 92035d1b1c..e9bc50ae45 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/steps_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/steps_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stress_test_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stress_test_screen.cpp
index 44ee453f15..2ffbdb9b8e 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stress_test_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stress_test_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.cpp
index b7ce76ecd2..c3114a3922 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.h
index e37a82d28a..545c701700 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/string_format.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/temperature_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/temperature_screen.cpp
index c254d2997f..e320bf5a01 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/temperature_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/temperature_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_calibration_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_calibration_screen.cpp
index 436445024a..185512b57b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_calibration_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_calibration_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_registers_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_registers_screen.cpp
index 8c3bc856b3..cd5cedf463 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_registers_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/touch_registers_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/tune_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/tune_menu.cpp
index 258ee4b04f..894b238ae0 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/tune_menu.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/tune_menu.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/widget_demo_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/widget_demo_screen.cpp
index d7c4562041..6a9acbf8f1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/widget_demo_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/widget_demo_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/z_offset_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/z_offset_screen.cpp
index f5cd03697c..dd211e3439 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/z_offset_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/z_offset_screen.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../config.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bitmaps.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bitmaps.h
index 2cb039c84d..8c0366ebeb 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bitmaps.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bitmaps.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h
index 6ea317dbc3..5d9735892d 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/bootscreen_logo_portrait.h
@@ -10,7 +10,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <http://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/colors.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/colors.h
index 4e2fde6ab3..cdcf00a21b 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/colors.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/colors.h
@@ -18,7 +18,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/fonts.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/fonts.h
index 63115b4187..bdb9d492ab 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/fonts.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/fonts.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h
index eb9cadeba1..e023599a27 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_landscape.h
@@ -11,7 +11,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h
index dd5088e0ce..e3a30a6dfe 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/marlin_bootscreen_portrait.h
@@ -11,7 +11,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.cpp
index f4a80bcc09..afbed0cab1 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.cpp
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../compat.h"
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.h
index b2b8890386..66c1cb810c 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/sounds.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/theme.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/theme.h
index df7782ce87..e0f0f31da5 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/theme.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/theme/theme.h
@@ -17,7 +17,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/Marlin/src/lcd/extui/lib/mks_ui/printer_operation.cpp b/Marlin/src/lcd/extui/lib/mks_ui/printer_operation.cpp
index edd90848d5..4f700a16dc 100644
--- a/Marlin/src/lcd/extui/lib/mks_ui/printer_operation.cpp
+++ b/Marlin/src/lcd/extui/lib/mks_ui/printer_operation.cpp
@@ -32,6 +32,7 @@
 #include "../../../../module/motion.h"
 #include "../../../../sd/cardreader.h"
 #include "../../../../inc/MarlinConfig.h"
+#include "../../../../MarlinCore.h"
 
 #if ENABLED(POWER_LOSS_RECOVERY)
   #include "../../../../feature/powerloss.h"
@@ -95,7 +96,7 @@ void printer_state_polling() {
         gcode.process_subcommands_now(public_buf_l);
         gcode.process_subcommands_now_P(PSTR("G90"));
       }
-      gcode.process_subcommands_now_P(PSTR("M24"));
+      gcode.process_subcommands_now_P(M24_STR);
       uiCfg.print_state = WORKING;
       start_print_time();
 
diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp
index 80033e911b..ac8e6ebf88 100644
--- a/Marlin/src/lcd/extui/ui_api.cpp
+++ b/Marlin/src/lcd/extui/ui_api.cpp
@@ -38,7 +38,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../../inc/MarlinConfigPre.h"
diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h
index 48d0e97220..c429a0aade 100644
--- a/Marlin/src/lcd/extui/ui_api.h
+++ b/Marlin/src/lcd/extui/ui_api.h
@@ -39,7 +39,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #include "../../inc/MarlinConfig.h"
diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h
index a5030fcd56..13400f8459 100644
--- a/Marlin/src/lcd/language/language_an.h
+++ b/Marlin/src/lcd/language/language_an.h
@@ -42,7 +42,7 @@ namespace Language_an {
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Tarcheta sacada");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("Endstops"); // Max length 8 characters
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menu prencipal");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Inicio automatico");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Inicio automatico");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Amortar motors");
   PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Levar a l'orichen");
   PROGMEM Language_Str MSG_AUTO_HOME_X                     = _UxGT("Orichen X");
diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h
index dcb06e31e7..b774cc29a2 100644
--- a/Marlin/src/lcd/language/language_bg.h
+++ b/Marlin/src/lcd/language/language_bg.h
@@ -40,7 +40,7 @@ namespace Language_bg {
   PROGMEM Language_Str MSG_MEDIA_INSERTED                  = _UxGT("Картата е поставена");
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Картата е извадена");
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Меню");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Автостарт");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Автостарт");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Изкл. двигатели");
   PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Паркиране");
   PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = _UxGT("Задай Начало");
diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h
index 0657c4a759..0ad725262d 100644
--- a/Marlin/src/lcd/language/language_ca.h
+++ b/Marlin/src/lcd/language/language_ca.h
@@ -38,7 +38,7 @@ namespace Language_ca {
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Targeta extreta.");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("Endstops");
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menú principal");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Inici automatic");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Inici automatic");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Desactiva motors");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menu de depuracio");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Test barra progres");
diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
index 9cbd7042d6..073d46bad2 100644
--- a/Marlin/src/lcd/language/language_cz.h
+++ b/Marlin/src/lcd/language/language_cz.h
@@ -57,7 +57,7 @@ namespace Language_cz {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Hlavní nabídka");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Další nastavení");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Konfigurace");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Uvolnit motory");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Nabídka ladění");
   #if LCD_WIDTH >= 20
diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h
index f8d891576e..1ca23d6044 100644
--- a/Marlin/src/lcd/language/language_de.h
+++ b/Marlin/src/lcd/language/language_de.h
@@ -53,7 +53,7 @@ namespace Language_de {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Hauptmenü");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Erw. Einstellungen");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Konfiguration");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Motoren deaktivieren"); // M84 :: Max length 19 characters
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Debug-Menü");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Statusbalken-Test");
diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h
index 125119d5cc..885f745708 100644
--- a/Marlin/src/lcd/language/language_el.h
+++ b/Marlin/src/lcd/language/language_el.h
@@ -40,7 +40,7 @@ namespace Language_el {
   PROGMEM Language_Str MSG_MEDIA_INSERTED                  = _UxGT("Εισαγωγή κάρτας");
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Αφαίρεση κάρτας");
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Βασική Οθόνη");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Αυτόματη εκκίνηση");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Αυτόματη εκκίνηση");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Απενεργοποίηση Μοτέρ");
   PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Αυτομ. επαναφορά στο αρχικό σημείο"); //SHORTEN
   PROGMEM Language_Str MSG_AUTO_HOME_X                     = _UxGT("Αρχικό σημείο X");
diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h
index 3db6fccdf0..fe36b6d663 100644
--- a/Marlin/src/lcd/language/language_el_gr.h
+++ b/Marlin/src/lcd/language/language_el_gr.h
@@ -41,7 +41,7 @@ namespace Language_el_gr {
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Αφαίρεση κάρτας");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("Endstops"); // Max length 8 characters
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Βασική Οθόνη");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Αυτόματη εκκίνηση");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Αυτόματη εκκίνηση");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Απενεργοποίηση βηματιστή");
   PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Αυτομ. επαναφορά στο αρχικό σημείο");
   PROGMEM Language_Str MSG_AUTO_HOME_X                     = _UxGT("Αρχικό σημείο X");
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 42954d79e5..ffaaf2e02a 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -64,7 +64,7 @@ namespace Language_en {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Main");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Advanced Settings");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configuration");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Run Auto Files");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Disable Steppers");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Debug Menu");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Progress Bar Test");
@@ -73,7 +73,6 @@ namespace Language_en {
   PROGMEM Language_Str MSG_AUTO_HOME_Y                     = _UxGT("Home Y");
   PROGMEM Language_Str MSG_AUTO_HOME_Z                     = _UxGT("Home Z");
   PROGMEM Language_Str MSG_AUTO_Z_ALIGN                    = _UxGT("Auto Z-Align");
-  PROGMEM Language_Str MSG_ASSISTED_TRAMMING               = _UxGT("Assisted Tramming");
   PROGMEM Language_Str MSG_ITERATION                       = _UxGT("G34 Iteration: %i");
   PROGMEM Language_Str MSG_DECREASING_ACCURACY             = _UxGT("Accuracy Decreasing!");
   PROGMEM Language_Str MSG_ACCURACY_ACHIEVED               = _UxGT("Accuracy Achieved");
@@ -85,6 +84,10 @@ namespace Language_en {
   PROGMEM Language_Str MSG_SET_HOME_OFFSETS                = _UxGT("Set Home Offsets");
   PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED            = _UxGT("Offsets Applied");
   PROGMEM Language_Str MSG_SET_ORIGIN                      = _UxGT("Set Origin");
+  PROGMEM Language_Str MSG_ASSISTED_TRAMMING               = _UxGT("Assisted Tramming");
+  PROGMEM Language_Str MSG_TRAMMING_WIZARD                 = _UxGT("Tramming Wizard");
+  PROGMEM Language_Str MSG_SELECT_ORIGIN                   = _UxGT("Select Origin");
+  PROGMEM Language_Str MSG_LAST_VALUE_SP                   = _UxGT("Last value ");
   #if PREHEAT_COUNT
     PROGMEM Language_Str MSG_PREHEAT_1                     = _UxGT("Preheat ") PREHEAT_1_LABEL;
     PROGMEM Language_Str MSG_PREHEAT_1_H                   = _UxGT("Preheat ") PREHEAT_1_LABEL " ~";
@@ -666,6 +669,7 @@ namespace Language_en {
   PROGMEM Language_Str MSG_REHEATING                       = _UxGT("Reheating...");
 
   PROGMEM Language_Str MSG_PROBE_WIZARD                    = _UxGT("Z Probe Wizard");
+
   PROGMEM Language_Str MSG_SOUND                           = _UxGT("Sound");
 }
 
diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
index c77b12ee77..d4cf5fe54b 100644
--- a/Marlin/src/lcd/language/language_es.h
+++ b/Marlin/src/lcd/language/language_es.h
@@ -43,15 +43,17 @@ namespace Language_es {
   PROGMEM Language_Str MSG_MEDIA_INSERTED                  = _UxGT("SD/USB insertado");
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("SD/USB retirado");
   PROGMEM Language_Str MSG_MEDIA_WAITING                   = _UxGT("Esperando al SD/USB");
+  PROGMEM Language_Str MSG_SD_INIT_FAIL                    = _UxGT("Fallo al iniciar SD");
   PROGMEM Language_Str MSG_MEDIA_READ_ERROR                = _UxGT("Error lectura SD/USB");
   PROGMEM Language_Str MSG_MEDIA_USB_REMOVED               = _UxGT("Disp. USB retirado");
   PROGMEM Language_Str MSG_MEDIA_USB_FAILED                = _UxGT("Inicio USB fallido");
+  PROGMEM Language_Str MSG_KILL_SUBCALL_OVERFLOW           = _UxGT("Desbordamiento de subllamada");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("Endstops"); // Max length 8 characters
   PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS               = _UxGT("Soft Endstops");
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menú principal");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Ajustes avanzados");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configuración");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Inicio automático");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Inicio automático");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Apagar motores");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menú depuración");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Prob. barra progreso");
@@ -60,6 +62,10 @@ namespace Language_es {
   PROGMEM Language_Str MSG_AUTO_HOME_Y                     = _UxGT("Origen Y");
   PROGMEM Language_Str MSG_AUTO_HOME_Z                     = _UxGT("Origen Z");
   PROGMEM Language_Str MSG_AUTO_Z_ALIGN                    = _UxGT("Auto alineado Z");
+  PROGMEM Language_Str MSG_ASSISTED_TRAMMING               = _UxGT("Recorrido asistido");
+  PROGMEM Language_Str MSG_ITERATION                       = _UxGT("G34 Iteración: %i");
+  PROGMEM Language_Str MSG_DECREASING_ACCURACY             = _UxGT("¡Precisión disminuyendo!");
+  PROGMEM Language_Str MSG_ACCURACY_ACHIEVED               = _UxGT("Precisión conseguida");
   PROGMEM Language_Str MSG_LEVEL_BED_HOMING                = _UxGT("Origen XYZ");
   PROGMEM Language_Str MSG_LEVEL_BED_WAITING               = _UxGT("Pulsar para comenzar");
   PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT            = _UxGT("Siguiente punto");
diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h
index 7e35c6ee41..01ba4b5200 100644
--- a/Marlin/src/lcd/language/language_eu.h
+++ b/Marlin/src/lcd/language/language_eu.h
@@ -42,7 +42,7 @@ namespace Language_eu {
   PROGMEM Language_Str MSG_MEDIA_INSERTED                  = _UxGT("Txartela sartuta");
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Txartela kenduta");
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menu nagusia");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Auto hasiera");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Auto hasiera");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Itzali motoreak");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Arazketa Menua");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Prog. Barra Proba");
diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h
index e8621377d9..c8633ce0aa 100644
--- a/Marlin/src/lcd/language/language_fi.h
+++ b/Marlin/src/lcd/language/language_fi.h
@@ -40,7 +40,7 @@ namespace Language_fi {
   PROGMEM Language_Str MSG_MEDIA_INSERTED                  = _UxGT("Kortti asetettu");
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Kortti poistettu");
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Palaa");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Automaatti");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Automaatti");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Vapauta moottorit");
   PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Aja referenssiin");
   PROGMEM Language_Str MSG_SET_ORIGIN                      = _UxGT("Aseta origo");
diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h
index 714feeee99..661d6b5cc3 100644
--- a/Marlin/src/lcd/language/language_fr.h
+++ b/Marlin/src/lcd/language/language_fr.h
@@ -52,7 +52,7 @@ namespace Language_fr {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menu principal");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Config. avancée");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configuration");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Exéc. auto.gcode");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Exéc. auto.gcode");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Arrêter moteurs");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menu debug");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Test barre progress.");
diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
index 2fd4bf6975..d1d1704174 100644
--- a/Marlin/src/lcd/language/language_gl.h
+++ b/Marlin/src/lcd/language/language_gl.h
@@ -54,7 +54,7 @@ namespace Language_gl {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menú principal");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Axustes avanzados");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configuración");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autoarranque");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autoarranque");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Apagar motores");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menú depuración");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Test barra progreso");
diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h
index 1b2ae41fce..dba0e6df67 100644
--- a/Marlin/src/lcd/language/language_hr.h
+++ b/Marlin/src/lcd/language/language_hr.h
@@ -41,7 +41,7 @@ namespace Language_hr {
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("SD kartica uklonjena");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("Endstops"); // Max length 8 characters
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Main");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Auto pokretanje");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Auto pokretanje");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Ugasi steppere");
   PROGMEM Language_Str MSG_AUTO_HOME                       = _UxGT("Automatski homing");
   PROGMEM Language_Str MSG_AUTO_HOME_X                     = _UxGT("Home-aj X");
diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h
index 6e1b30c180..a5eae451a6 100644
--- a/Marlin/src/lcd/language/language_hu.h
+++ b/Marlin/src/lcd/language/language_hu.h
@@ -56,7 +56,7 @@ namespace Language_hu {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("<Fömenü>");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("További Beállítások");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Konfiguráció");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autoinditás");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autoinditás");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Motorok kikapcsolása");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Hiba Menü");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Haladás sáv teszt");
diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h
index 73639c2790..5a3d8f4c52 100644
--- a/Marlin/src/lcd/language/language_it.h
+++ b/Marlin/src/lcd/language/language_it.h
@@ -62,7 +62,7 @@ namespace Language_it {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menu principale");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Impostaz. avanzate");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configurazione");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Disabilita Motori");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menu di debug");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Test barra avanzam.");
diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h
index 32b12f50cb..ef288bd396 100644
--- a/Marlin/src/lcd/language/language_jp_kana.h
+++ b/Marlin/src/lcd/language/language_jp_kana.h
@@ -47,7 +47,7 @@ namespace Language_jp_kana {
   PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("メディアノトリダシ");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("エンドストップ");                  // "Endstops" // Max length 8 characters
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("メイン");                       // "Main"
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("ジドウカイシ");                   // "Autostart"
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("ジドウカイシ");                   // "Autostart"
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("モーターデンゲン オフ");            // "Disable steppers"
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("デバッグメニュー");                // "Debug Menu"
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("プログレスバー テスト");            // "Progress Bar Test"
diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h
index 1ab03dcf57..20700896c1 100644
--- a/Marlin/src/lcd/language/language_ko_KR.h
+++ b/Marlin/src/lcd/language/language_ko_KR.h
@@ -42,7 +42,7 @@ namespace Language_ko_KR {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("뒤로");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("고급 설정");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("설정");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("자동 시작");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("자동 시작");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("모터 정지");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("디버깅 메뉴");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("프로그레스바 테스트");
diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h
index c142c5c9bf..9cbebe1bb3 100644
--- a/Marlin/src/lcd/language/language_nl.h
+++ b/Marlin/src/lcd/language/language_nl.h
@@ -43,7 +43,7 @@ namespace Language_nl {
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("Kaart verwijderd");
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("Endstops"); // Max length 8 characters
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Hoofdmenu");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Motoren uit");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Debug Menu"); // accepted English terms
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Vooruitgang Test");
diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h
index 770c872a40..9b764c86a7 100644
--- a/Marlin/src/lcd/language/language_pl.h
+++ b/Marlin/src/lcd/language/language_pl.h
@@ -52,7 +52,7 @@ namespace Language_pl {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menu główne");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Ustawienie zaawansowane");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Konfiguracja");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Wyłącz silniki");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menu Debugowania");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Testowy pasek postępu");
diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h
index cf2f7a0cce..b52ae51c1c 100644
--- a/Marlin/src/lcd/language/language_pt_br.h
+++ b/Marlin/src/lcd/language/language_pt_br.h
@@ -51,7 +51,7 @@ namespace Language_pt_br {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Menu principal");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Config. Avançada");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configuração");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Início automático");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Início automático");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Desabilit. motores");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menu Debug");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Testar Barra Progres");
diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h
index 7b54f24abf..c4d2bea073 100644
--- a/Marlin/src/lcd/language/language_ro.h
+++ b/Marlin/src/lcd/language/language_ro.h
@@ -53,7 +53,7 @@ namespace Language_ro {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Principal");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Setari Avansate");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Configurare");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Autostart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Autostart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Dezactivare Motoare");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Meniu Debug");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Test Bara Progres");
diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h
index 2a2f568573..3734185357 100644
--- a/Marlin/src/lcd/language/language_ru.h
+++ b/Marlin/src/lcd/language/language_ru.h
@@ -56,7 +56,7 @@ namespace Language_ru {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Основное меню");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Другие настройки");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Конфигурация");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Автостарт");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Автостарт");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Выключить двигатели");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Меню отладки");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Тест индикатора");
diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h
index d0fdf5749c..e3de108191 100644
--- a/Marlin/src/lcd/language/language_sk.h
+++ b/Marlin/src/lcd/language/language_sk.h
@@ -57,7 +57,7 @@ namespace Language_sk {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Hlavná ponuka");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Pokročilé nastav.");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Konfigurácia");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Auto-štart");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Auto-štart");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Uvolniť motory");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Ponuka ladenia");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Test uk. priebehu");
diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h
index f81f153789..cca3a7eda7 100644
--- a/Marlin/src/lcd/language/language_tr.h
+++ b/Marlin/src/lcd/language/language_tr.h
@@ -57,7 +57,7 @@ namespace Language_tr {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Ana");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Gelişmiş Ayarlar");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Yapılandırma");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Oto. Başlat");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Oto. Başlat");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Motorları Durdur");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Hata Ayıklama");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Durum Çubuğu Testi");
diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h
index 9cc1002964..ac79b0b820 100644
--- a/Marlin/src/lcd/language/language_uk.h
+++ b/Marlin/src/lcd/language/language_uk.h
@@ -58,7 +58,7 @@ namespace Language_uk {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Основне меню");
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Інші налаштування");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Конфігурація");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Автостарт");
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Автостарт");
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Вимкнути двигуни");
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Меню Debug");
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Тест Progress Bar");
diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h
index f7cf606575..8a1cfad92a 100644
--- a/Marlin/src/lcd/language/language_vi.h
+++ b/Marlin/src/lcd/language/language_vi.h
@@ -47,7 +47,7 @@ namespace Language_vi {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("Chính");                                // Main
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("Thiết lập cấp cao");                    // Advanced Settings
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("Cấu hình");                             // Configuration
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("Khởi chạy tự động");                    // Autostart
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("Khởi chạy tự động");                    // Autostart
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("Tắt động cơ bước");                     // Disable steppers
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("Menu gỡ lỗi");                          // Debug Menu
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("Kiểm tra tiến độ");                     // Progress bar test
diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
index 3bebe12fda..56fd8a22f6 100644
--- a/Marlin/src/lcd/language/language_zh_CN.h
+++ b/Marlin/src/lcd/language/language_zh_CN.h
@@ -51,7 +51,7 @@ namespace Language_zh_CN {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("主菜单");     //"Main"
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("高级设置");
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("配置");
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("自动开始");     //"Autostart"
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("自动开始");     //"Autostart"
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("关闭步进电机");     //"Disable steppers"
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("调试菜单");     // "Debug Menu"
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("进度条测试");     // "Progress Bar Test"
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
index 7abf895d54..ac061e9b81 100644
--- a/Marlin/src/lcd/language/language_zh_TW.h
+++ b/Marlin/src/lcd/language/language_zh_TW.h
@@ -50,7 +50,7 @@ namespace Language_zh_TW {
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("主選單");     //"Main"
   PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("進階設置");   //"Advanced Settings"
   PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("設置");    //Configuration
-  PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("自動開始");     //"Autostart"
+  PROGMEM Language_Str MSG_RUN_AUTO_FILES                  = _UxGT("自動開始");     //"Autostart"
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("關閉步進馬達");     //"Disable steppers"
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("除錯選單");     // "Debug Menu"
   PROGMEM Language_Str MSG_PROGRESS_BAR_TEST               = _UxGT("進度條測試");     // "Progress Bar Test"
diff --git a/Marlin/src/lcd/lcdprint.cpp b/Marlin/src/lcd/lcdprint.cpp
index e381c590f5..6781b81d7c 100644
--- a/Marlin/src/lcd/lcdprint.cpp
+++ b/Marlin/src/lcd/lcdprint.cpp
@@ -32,7 +32,12 @@
 
 /**
  * lcd_put_u8str_ind_P
- * Print a string with an index substituted within it
+ *
+ * Print a string with an index substituted within it:
+ *
+ *   = displays  '0'....'10' for indexes 0 - 10
+ *   ~ displays  '1'....'11' for indexes 0 - 10
+ *   * displays 'E1'...'E11' for indexes 0 - 10 (By default. Uses LCD_FIRST_TOOL)
  */
 lcd_uint_t lcd_put_u8str_ind_P(PGM_P const pstr, const int8_t ind, PGM_P const inStr/*=nullptr*/, const lcd_uint_t maxlen/*=LCD_WIDTH*/) {
   uint8_t *p = (uint8_t*)pstr;
diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp
index cd94927049..35c736c560 100644
--- a/Marlin/src/lcd/menu/menu.cpp
+++ b/Marlin/src/lcd/menu/menu.cpp
@@ -81,7 +81,7 @@ void MarlinUI::save_previous_screen() {
 }
 
 void MarlinUI::_goto_previous_screen(TERN_(TURBO_BACK_MENU_ITEM, const bool is_back/*=false*/)) {
-  TERN(TURBO_BACK_MENU_ITEM,,constexpr bool is_back = false);
+  IF_DISABLED(TURBO_BACK_MENU_ITEM, constexpr bool is_back = false);
   TERN_(HAS_TOUCH_XPT2046, on_edit_screen = false);
   if (screen_history_depth > 0) {
     menuPosition &sh = screen_history[--screen_history_depth];
diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp
index 0e207ffc55..fdddf1781a 100644
--- a/Marlin/src/lcd/menu/menu_advanced.cpp
+++ b/Marlin/src/lcd/menu/menu_advanced.cpp
@@ -202,12 +202,12 @@ void menu_backlash();
   // Helpers for editing PID Ki & Kd values
   // grab the PID value out of the temp variable; scale it; then update the PID driver
   void copy_and_scalePID_i(int16_t e) {
-    TERN(PID_PARAMS_PER_HOTEND,,UNUSED(e));
+    UNUSED(e);
     PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
     thermalManager.updatePID();
   }
   void copy_and_scalePID_d(int16_t e) {
-    TERN(PID_PARAMS_PER_HOTEND,,UNUSED(e));
+    UNUSED(e);
     PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
     thermalManager.updatePID();
   }
diff --git a/Marlin/src/lcd/menu/menu_filament.cpp b/Marlin/src/lcd/menu/menu_filament.cpp
index d116a6a398..5f0afa4768 100644
--- a/Marlin/src/lcd/menu/menu_filament.cpp
+++ b/Marlin/src/lcd/menu/menu_filament.cpp
@@ -219,7 +219,7 @@ static PGM_P pause_header() {
 #define HOTEND_STATUS_ITEM() do { \
   if (_menuLineNr == _thisItemNr) { \
     if (ui.should_draw()) { \
-      TERN(HAS_GRAPHICAL_TFT,, MenuItem_static::draw(_lcdLineNr, GET_TEXT(MSG_FILAMENT_CHANGE_NOZZLE), SS_INVERT)); \
+      IF_DISABLED(HAS_GRAPHICAL_TFT, MenuItem_static::draw(_lcdLineNr, GET_TEXT(MSG_FILAMENT_CHANGE_NOZZLE), SS_INVERT)); \
       ui.draw_hotend_status(_lcdLineNr, hotend_status_extruder); \
     } \
     if (_skipStatic && encoderLine <= _thisItemNr) { \
diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp
index 5b98382559..992303b791 100644
--- a/Marlin/src/lcd/menu/menu_main.cpp
+++ b/Marlin/src/lcd/menu/menu_main.cpp
@@ -133,10 +133,10 @@ void menu_main() {
       // *** IF THIS SECTION IS CHANGED, REPRODUCE BELOW ***
 
       //
-      // Autostart
+      // Run Auto Files
       //
       #if ENABLED(MENU_ADDAUTOSTART)
-        ACTION_ITEM(MSG_AUTOSTART, card.beginautostart);
+        ACTION_ITEM(MSG_RUN_AUTO_FILES, card.beginautostart);
       #endif
 
       if (card_detected) {
@@ -238,7 +238,7 @@ void menu_main() {
       // Autostart
       //
       #if ENABLED(MENU_ADDAUTOSTART)
-        ACTION_ITEM(MSG_AUTOSTART, card.beginautostart);
+        ACTION_ITEM(MSG_RUN_AUTO_FILES, card.beginautostart);
       #endif
 
       if (card_detected) {
diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp
index 2972920f34..c681842e90 100644
--- a/Marlin/src/lcd/menu/menu_motion.cpp
+++ b/Marlin/src/lcd/menu/menu_motion.cpp
@@ -305,6 +305,10 @@ void menu_move() {
   void menu_bed_leveling();
 #endif
 
+#if ENABLED(ASSISTED_TRAMMING_WIZARD)
+  void goto_tramming_wizard();
+#endif
+
 void menu_motion() {
   START_MENU();
 
@@ -346,7 +350,9 @@ void menu_motion() {
   //
   // Assisted Bed Tramming
   //
-  #if ENABLED(ASSISTED_TRAMMING_MENU_ITEM)
+  #if ENABLED(ASSISTED_TRAMMING_WIZARD)
+    SUBMENU(MSG_TRAMMING_WIZARD, goto_tramming_wizard);
+  #elif ENABLED(ASSISTED_TRAMMING_MENU_ITEM)
     GCODES_ITEM(MSG_ASSISTED_TRAMMING, PSTR("G35"));
   #endif
 
diff --git a/Marlin/src/lcd/menu/menu_probe_offset.cpp b/Marlin/src/lcd/menu/menu_probe_offset.cpp
index 4623b8f492..8a6cbaaf31 100644
--- a/Marlin/src/lcd/menu/menu_probe_offset.cpp
+++ b/Marlin/src/lcd/menu/menu_probe_offset.cpp
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp
index 28ea54efba..f914301328 100644
--- a/Marlin/src/lcd/menu/menu_temperature.cpp
+++ b/Marlin/src/lcd/menu/menu_temperature.cpp
@@ -63,15 +63,14 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
 
   #if HAS_TEMP_HOTEND
     inline void _preheat_end(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); }
-    #if HAS_HEATED_BED
-      inline void _preheat_both(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, m); }
-    #endif
+    void do_preheat_end_m() { _preheat_end(editable.int8, 0); }
   #endif
   #if HAS_HEATED_BED
     inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(-1, -1, m); }
   #endif
 
   #if HAS_TEMP_HOTEND && HAS_HEATED_BED
+    inline void _preheat_both(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, m); }
 
     // Indexed "Preheat ABC" and "Heat Bed" items
     #define PREHEAT_ITEMS(M,E) do{ \
@@ -86,10 +85,6 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
 
   #endif
 
-  void do_preheat_end_m() {
-    _preheat_end(editable.int8, 0);
-  }
-
   #if HAS_MULTI_HOTEND || HAS_HEATED_BED
 
     // Set editable.int8 to the Material index before entering this menu
diff --git a/Marlin/src/lcd/menu/menu_tramming.cpp b/Marlin/src/lcd/menu/menu_tramming.cpp
new file mode 100644
index 0000000000..a102fe7e57
--- /dev/null
+++ b/Marlin/src/lcd/menu/menu_tramming.cpp
@@ -0,0 +1,93 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+//
+// Bed Tramming Wizard
+//
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if BOTH(HAS_LCD_MENU, ASSISTED_TRAMMING_WIZARD)
+
+#include "menu_item.h"
+
+#include "../../feature/tramming.h"
+
+#include "../../module/motion.h"
+#include "../../module/probe.h"
+#include "../../gcode/queue.h"
+
+//#define DEBUG_OUT 1
+#include "../../core/debug_out.h"
+
+float z_measured[G35_PROBE_COUNT] = { 0 };
+static uint8_t tram_index = 0;
+
+bool probe_single_point() {
+  const float z_probed_height = probe.probe_at_point(screws_tilt_adjust_pos[tram_index], PROBE_PT_RAISE, 0, true);
+  DEBUG_ECHOLNPAIR("probe_single_point: ", z_probed_height, "mm");
+  z_measured[tram_index] = z_probed_height;
+  return !isnan(z_probed_height);
+}
+
+void _menu_single_probe(const uint8_t point) {
+  tram_index = point;
+  DEBUG_ECHOLNPAIR("Screen: single probe screen Arg:", point);
+  START_MENU();
+  STATIC_ITEM(MSG_LEVEL_CORNERS, SS_LEFT);
+  STATIC_ITEM(MSG_LAST_VALUE_SP, SS_LEFT, ftostr42_52(z_measured[0] - z_measured[point])); // Print diff
+  ACTION_ITEM(MSG_UBL_BC_INSERT2, []{ if (probe_single_point()) ui.refresh(); });
+  ACTION_ITEM(MSG_BUTTON_DONE, []{ ui.goto_previous_screen_no_defer(); }); // Back
+  END_MENU();
+}
+
+void tramming_wizard_menu() {
+  DEBUG_ECHOLNPAIR("Screen: tramming_wizard_menu");
+  START_MENU();
+  STATIC_ITEM(MSG_SELECT_ORIGIN);
+
+  // Draw a menu item for each tramming point
+  LOOP_L_N(i, G35_PROBE_COUNT)
+    SUBMENU_N_P(i, (char*)pgm_read_ptr(&tramming_point_name[i]), []{ _menu_single_probe(MenuItemBase::itemIndex); });
+
+  ACTION_ITEM(MSG_BUTTON_DONE, []{ ui.goto_previous_screen_no_defer(); });
+  END_MENU();
+}
+
+// Init the wizard and enter the submenu
+void goto_tramming_wizard() {
+  DEBUG_ECHOLNPAIR("Screen: goto_tramming_wizard", 1);
+  tram_index = 0;
+  ui.defer_status_screen();
+  //probe_single_point(); // Probe first point to get differences
+
+  // Inject G28, wait for homing to complete,
+  set_all_unhomed();
+  queue.inject_P(G28_STR);
+  ui.goto_screen([]{
+    _lcd_draw_homing();
+    if (all_axes_homed())
+      ui.goto_screen(tramming_wizard_menu);
+  });
+}
+
+#endif // HAS_LCD_MENU && ASSISTED_TRAMMING_WIZARD
diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp
index f0f5c21bec..5dce47eec2 100644
--- a/Marlin/src/lcd/menu/menu_ubl.cpp
+++ b/Marlin/src/lcd/menu/menu_ubl.cpp
@@ -64,7 +64,7 @@ static void _lcd_mesh_fine_tune(PGM_P const msg) {
       ubl.encoder_diff > 0 ? 0.005f : -0.005f
     );
     ubl.encoder_diff = 0;
-    TERN(IS_TFTGLCD_PANEL,,ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
+    IF_DISABLED(IS_TFTGLCD_PANEL, ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
   }
   TERN_(IS_TFTGLCD_PANEL, ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
 
diff --git a/Marlin/src/lcd/tft/fontdata/fontdata_10x20.cpp b/Marlin/src/lcd/tft/fontdata/fontdata_10x20.cpp
index cc328e885d..f03366d6f7 100644
--- a/Marlin/src/lcd/tft/fontdata/fontdata_10x20.cpp
+++ b/Marlin/src/lcd/tft/fontdata/fontdata_10x20.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/lcd/tft/fontdata/fontdata_ISO10646_1.cpp b/Marlin/src/lcd/tft/fontdata/fontdata_ISO10646_1.cpp
index ade8bf23b8..21531f5c14 100644
--- a/Marlin/src/lcd/tft/fontdata/fontdata_ISO10646_1.cpp
+++ b/Marlin/src/lcd/tft/fontdata/fontdata_ISO10646_1.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/lcd/tft/fontdata/helvetica_12_bold.cpp b/Marlin/src/lcd/tft/fontdata/helvetica_12_bold.cpp
index 12efb3ba49..e7411ea9ed 100644
--- a/Marlin/src/lcd/tft/fontdata/helvetica_12_bold.cpp
+++ b/Marlin/src/lcd/tft/fontdata/helvetica_12_bold.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/lcd/tft/fontdata/helvetica_14.cpp b/Marlin/src/lcd/tft/fontdata/helvetica_14.cpp
index a27ea43697..87e7135e37 100644
--- a/Marlin/src/lcd/tft/fontdata/helvetica_14.cpp
+++ b/Marlin/src/lcd/tft/fontdata/helvetica_14.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/lcd/tft/tft_string.cpp b/Marlin/src/lcd/tft/tft_string.cpp
index b707596bb3..eb805ac423 100644
--- a/Marlin/src/lcd/tft/tft_string.cpp
+++ b/Marlin/src/lcd/tft/tft_string.cpp
@@ -44,21 +44,21 @@ void TFT_String::set_font(const uint8_t *font) {
 
   for (glyph = 0; glyph < 256; glyph++) glyphs[glyph] = nullptr;
 
-  DEBUG_ECHOLNPAIR("Format: ", font_header->Format);
-  DEBUG_ECHOLNPAIR("BBXWidth: ", font_header->BBXWidth);
-  DEBUG_ECHOLNPAIR("BBXHeight: ", font_header->BBXHeight);
-  DEBUG_ECHOLNPAIR("BBXOffsetX: ", font_header->BBXOffsetX);
-  DEBUG_ECHOLNPAIR("BBXOffsetY: ", font_header->BBXOffsetY);
-  DEBUG_ECHOLNPAIR("CapitalAHeight: ", font_header->CapitalAHeight);
-  DEBUG_ECHOLNPAIR("Encoding65Pos: ", font_header->Encoding65Pos);
-  DEBUG_ECHOLNPAIR("Encoding97Pos: ", font_header->Encoding97Pos);
+  DEBUG_ECHOLNPAIR("Format: ",            font_header->Format);
+  DEBUG_ECHOLNPAIR("BBXWidth: ",          font_header->BBXWidth);
+  DEBUG_ECHOLNPAIR("BBXHeight: ",         font_header->BBXHeight);
+  DEBUG_ECHOLNPAIR("BBXOffsetX: ",        font_header->BBXOffsetX);
+  DEBUG_ECHOLNPAIR("BBXOffsetY: ",        font_header->BBXOffsetY);
+  DEBUG_ECHOLNPAIR("CapitalAHeight: ",    font_header->CapitalAHeight);
+  DEBUG_ECHOLNPAIR("Encoding65Pos: ",     font_header->Encoding65Pos);
+  DEBUG_ECHOLNPAIR("Encoding97Pos: ",     font_header->Encoding97Pos);
   DEBUG_ECHOLNPAIR("FontStartEncoding: ", font_header->FontStartEncoding);
-  DEBUG_ECHOLNPAIR("FontEndEncoding: ", font_header->FontEndEncoding);
-  DEBUG_ECHOLNPAIR("LowerGDescent: ", font_header->LowerGDescent);
-  DEBUG_ECHOLNPAIR("FontAscent: ", font_header->FontAscent);
-  DEBUG_ECHOLNPAIR("FontDescent: ", font_header->FontDescent);
-  DEBUG_ECHOLNPAIR("FontXAscent: ", font_header->FontXAscent);
-  DEBUG_ECHOLNPAIR("FontXDescent: ", font_header->FontXDescent);
+  DEBUG_ECHOLNPAIR("FontEndEncoding: ",   font_header->FontEndEncoding);
+  DEBUG_ECHOLNPAIR("LowerGDescent: ",     font_header->LowerGDescent);
+  DEBUG_ECHOLNPAIR("FontAscent: ",        font_header->FontAscent);
+  DEBUG_ECHOLNPAIR("FontDescent: ",       font_header->FontDescent);
+  DEBUG_ECHOLNPAIR("FontXAscent: ",       font_header->FontXAscent);
+  DEBUG_ECHOLNPAIR("FontXDescent: ",      font_header->FontXDescent);
 
   add_glyphs(font);
 }
@@ -72,9 +72,8 @@ void TFT_String::add_glyphs(const uint8_t *font) {
       glyphs[glyph] = (glyph_t *)pointer;
       pointer += sizeof(glyph_t) + ((glyph_t *)pointer)->DataSize;
     }
-    else {
+    else
       pointer++;
-    }
   }
 }
 
@@ -86,6 +85,13 @@ void TFT_String::set() {
 
 uint8_t read_byte(uint8_t *byte) { return *byte; }
 
+/**
+ * Add a string, applying substitutions for the following characters:
+ *
+ *   = displays  '0'....'10' for indexes 0 - 10
+ *   ~ displays  '1'....'11' for indexes 0 - 10
+ *   * displays 'E1'...'E11' for indexes 0 - 10 (By default. Uses LCD_FIRST_TOOL)
+ */
 void TFT_String::add(uint8_t *string, int8_t index, uint8_t *itemString) {
   wchar_t wchar;
 
diff --git a/Marlin/src/lcd/tft/tft_string.h b/Marlin/src/lcd/tft/tft_string.h
index 924d6de430..e800b1ded9 100644
--- a/Marlin/src/lcd/tft/tft_string.h
+++ b/Marlin/src/lcd/tft/tft_string.h
@@ -80,22 +80,22 @@ class TFT_String {
 
     static font_t *font() { return font_header; };
     static uint16_t font_height() { return font_header->FontAscent - font_header->FontDescent; }
-    static glyph_t *glyph(uint8_t character) { return glyphs[character] == NULL ? glyphs[0x3F] : glyphs[character]; }  /* Use '?' for unknown glyphs */
+    static glyph_t *glyph(uint8_t character) { return glyphs[character] ?: glyphs[0x3F]; }  /* Use '?' for unknown glyphs */
     static inline glyph_t *glyph(uint8_t *character) { return glyph(*character); }
 
     static void set();
     static void add(uint8_t character) { add_character(character); eol(); }
     static void add(uint8_t *string);
-    static void add(uint8_t *string, int8_t index, uint8_t *itemString = NULL);
+    static void add(uint8_t *string, int8_t index, uint8_t *itemString=nullptr);
     static void set(uint8_t *string) { set(); add(string); };
-    static void set(uint8_t *string, int8_t index, const char *itemString = NULL) { set(); add(string, index, (uint8_t *)itemString); };
+    static void set(uint8_t *string, int8_t index, const char *itemString=nullptr) { set(); add(string, index, (uint8_t *)itemString); };
     static inline void set(const char *string) { set((uint8_t *)string); }
-    static inline void set(const char *string, int8_t index, const char *itemString = NULL) { set((uint8_t *)string, index, itemString); }
+    static inline void set(const char *string, int8_t index, const char *itemString=nullptr) { set((uint8_t *)string, index, itemString); }
     static inline void add(const char *string) { add((uint8_t *)string); }
 
-    static void trim(uint8_t character = 0x20);
-    static void rtrim(uint8_t character = 0x20);
-    static void ltrim(uint8_t character = 0x20);
+    static void trim(uint8_t character=0x20);
+    static void rtrim(uint8_t character=0x20);
+    static void ltrim(uint8_t character=0x20);
     static uint16_t width() { return span; }
     static uint8_t *string() { return data; }
     static uint16_t center(uint16_t width) { return span > width ? 0 : (width - span) / 2; }
diff --git a/Marlin/src/lcd/tft/touch.cpp b/Marlin/src/lcd/tft/touch.cpp
index d54506442d..adbc2923a4 100644
--- a/Marlin/src/lcd/tft/touch.cpp
+++ b/Marlin/src/lcd/tft/touch.cpp
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -203,7 +206,10 @@ void Touch::touch(touch_control_t *control) {
 
     case MENU_SCREEN: ui.goto_screen((screenFunc_t)control->data); break;
     case BACK: ui.goto_previous_screen(); break;
-    case CLICK: ui.lcd_clicked = true; break;
+    case CLICK:
+      TERN_(SINGLE_TOUCH_NAVIGATION, ui.encoderPosition = control->data);
+      ui.lcd_clicked = true;
+      break;
     #if HAS_RESUME_CONTINUE
       case RESUME_CONTINUE: extern bool wait_for_user; wait_for_user = false; break;
     #endif
diff --git a/Marlin/src/lcd/tft/touch.h b/Marlin/src/lcd/tft/touch.h
index 4ba3e22c8e..7cb05891de 100644
--- a/Marlin/src/lcd/tft/touch.h
+++ b/Marlin/src/lcd/tft/touch.h
@@ -1,6 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/Marlin/src/lcd/tft/ui_320x240.cpp b/Marlin/src/lcd/tft/ui_320x240.cpp
index 4e2cd8acc4..999cec29ba 100644
--- a/Marlin/src/lcd/tft/ui_320x240.cpp
+++ b/Marlin/src/lcd/tft/ui_320x240.cpp
@@ -647,7 +647,10 @@ void menu_item(const uint8_t row, bool sel ) {
   #endif
 
   menu_line(row, sel ? COLOR_SELECTION_BG : COLOR_BACKGROUND);
-  TERN_(TOUCH_SCREEN, touch.add_control(sel ? CLICK : MENU_ITEM, 0, 2 + 34 * row, 320, 32, encoderTopLine + row));
+  #if ENABLED(TOUCH_SCREEN)
+    const TouchControlType tct = TERN(SINGLE_TOUCH_NAVIGATION, true, sel) ? CLICK : MENU_ITEM;
+    touch.add_control(tct, 0, 2 + 34 * row, 320, 32, encoderTopLine + row);
+  #endif
 }
 
 void MarlinUI::move_axis_screen() {
diff --git a/Marlin/src/lcd/tft/ui_480x320.cpp b/Marlin/src/lcd/tft/ui_480x320.cpp
index 0c44a3151b..e2bbdcde7f 100644
--- a/Marlin/src/lcd/tft/ui_480x320.cpp
+++ b/Marlin/src/lcd/tft/ui_480x320.cpp
@@ -428,21 +428,21 @@ void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const valu
   extern screenFunc_t _manual_move_func_ptr;
   if (ui.currentScreen != _manual_move_func_ptr && !ui.external_control) {
 
-    #define SLIDER_LENGHT 336
+    #define SLIDER_LENGTH 336
     #define SLIDER_Y_POSITION 186
 
-    tft.canvas((TFT_WIDTH - SLIDER_LENGHT) / 2, SLIDER_Y_POSITION, SLIDER_LENGHT, 16);
+    tft.canvas((TFT_WIDTH - SLIDER_LENGTH) / 2, SLIDER_Y_POSITION, SLIDER_LENGTH, 16);
     tft.set_background(COLOR_BACKGROUND);
 
-    int16_t position = (SLIDER_LENGHT - 2) * ui.encoderPosition / maxEditValue;
+    int16_t position = (SLIDER_LENGTH - 2) * ui.encoderPosition / maxEditValue;
     tft.add_bar(0, 7, 1, 2, ui.encoderPosition == 0 ? COLOR_SLIDER_INACTIVE : COLOR_SLIDER);
     tft.add_bar(1, 6, position, 4, COLOR_SLIDER);
-    tft.add_bar(position + 1, 6, SLIDER_LENGHT - 2 - position, 4, COLOR_SLIDER_INACTIVE);
-    tft.add_bar(SLIDER_LENGHT - 1, 7, 1, 2, int32_t(ui.encoderPosition) == maxEditValue ? COLOR_SLIDER : COLOR_SLIDER_INACTIVE);
+    tft.add_bar(position + 1, 6, SLIDER_LENGTH - 2 - position, 4, COLOR_SLIDER_INACTIVE);
+    tft.add_bar(SLIDER_LENGTH - 1, 7, 1, 2, int32_t(ui.encoderPosition) == maxEditValue ? COLOR_SLIDER : COLOR_SLIDER_INACTIVE);
 
     #if ENABLED(TOUCH_SCREEN)
-      tft.add_image((SLIDER_LENGHT - 8) * ui.encoderPosition / maxEditValue, 0, imgSlider, COLOR_SLIDER);
-      touch.add_control(SLIDER, (TFT_WIDTH - SLIDER_LENGHT) / 2, SLIDER_Y_POSITION - 8, SLIDER_LENGHT, 32, maxEditValue);
+      tft.add_image((SLIDER_LENGTH - 8) * ui.encoderPosition / maxEditValue, 0, imgSlider, COLOR_SLIDER);
+      touch.add_control(SLIDER, (TFT_WIDTH - SLIDER_LENGTH) / 2, SLIDER_Y_POSITION - 8, SLIDER_LENGTH, 32, maxEditValue);
     #endif
   }
 
@@ -652,7 +652,10 @@ void menu_item(const uint8_t row, bool sel ) {
   #endif
 
   menu_line(row, sel ? COLOR_SELECTION_BG : COLOR_BACKGROUND);
-  TERN_(TOUCH_SCREEN, touch.add_control(sel ? CLICK : MENU_ITEM, 0, 4 + 45 * row, TFT_WIDTH, 43, encoderTopLine + row));
+  #if ENABLED(TOUCH_SCREEN)
+    const TouchControlType tct = TERN(SINGLE_TOUCH_NAVIGATION, true, sel) ? CLICK : MENU_ITEM;
+    touch.add_control(tct, 0, 4 + 45 * row, TFT_WIDTH, 43, encoderTopLine + row);
+  #endif
 }
 
 #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
diff --git a/Marlin/src/lcd/tft_io/ssd1963.h b/Marlin/src/lcd/tft_io/ssd1963.h
index 4953a96233..af42e306c6 100644
--- a/Marlin/src/lcd/tft_io/ssd1963.h
+++ b/Marlin/src/lcd/tft_io/ssd1963.h
@@ -125,7 +125,7 @@ static const uint16_t ssd1963_init[] = {
   ESC_REG(SSD1963_NORON),
   ESC_REG(SSD1963_DISPON),
 
-  ESC_REG(SSD1963_SPWMCFG), 0x0006, 0x00f0, 0x0001, 0x00f0, 0x0000, 0x0000,
+  ESC_REG(SSD1963_SPWMCFG), 0x0006, 0x00F0, 0x0001, 0x00F0, 0x0000, 0x0000,
   ESC_REG(SSD1963_SDBCCFG), 0x000D,
   ESC_END
 };
diff --git a/Marlin/src/lcd/thermistornames.h b/Marlin/src/lcd/thermistornames.h
index 37f285d483..f9f91ac49a 100644
--- a/Marlin/src/lcd/thermistornames.h
+++ b/Marlin/src/lcd/thermistornames.h
@@ -68,6 +68,8 @@
   #define THERMISTOR_NAME "Zonestar (Tronxy X3A)"
 #elif THERMISTOR_ID == 502
   #define THERMISTOR_NAME "Zonestar (P802M Hot Bed)"
+#elif THERMISTOR_ID == 503
+  #define THERMISTOR_NAME "Zonestar (Z8XM2 Bed)"
 #elif THERMISTOR_ID == 512
   #define THERMISTOR_NAME "RPW-Ultra"
 #elif THERMISTOR_ID == 6
diff --git a/Marlin/src/libs/W25Qxx.cpp b/Marlin/src/libs/W25Qxx.cpp
index 03e002f66f..ebf326f2e5 100644
--- a/Marlin/src/libs/W25Qxx.cpp
+++ b/Marlin/src/libs/W25Qxx.cpp
@@ -25,7 +25,6 @@
 #if HAS_SPI_FLASH
 
 #include "W25Qxx.h"
-#include <SPI.h>
 
 W25QXXFlash W25QXX;
 
@@ -41,6 +40,11 @@ W25QXXFlash W25QXX;
 #ifndef SPI_FLASH_CS_PIN
   #define SPI_FLASH_CS_PIN   W25QXX_CS_PIN
 #endif
+#ifndef NC
+  #define NC -1
+#endif
+
+MarlinSPI W25QXXFlash::mySPI(SPI_FLASH_MOSI_PIN, SPI_FLASH_MISO_PIN, SPI_FLASH_SCK_PIN, NC);
 
 #define W25QXX_CS_H OUT_WRITE(SPI_FLASH_CS_PIN, HIGH)
 #define W25QXX_CS_L OUT_WRITE(SPI_FLASH_CS_PIN, LOW)
@@ -69,11 +73,11 @@ void W25QXXFlash::init(uint8_t spiRate) {
     case SPI_SPEED_6:       clock = SPI_CLOCK_DIV64; break;
     default:                clock = SPI_CLOCK_DIV2;// Default from the SPI library
   }
-  SPI.setModule(SPI_DEVICE);
-  SPI.begin();
-  SPI.setClockDivider(clock);
-  SPI.setBitOrder(MSBFIRST);
-  SPI.setDataMode(SPI_MODE0);
+
+  mySPI.setClockDivider(clock);
+  mySPI.setBitOrder(MSBFIRST);
+  mySPI.setDataMode(SPI_MODE0);
+  mySPI.begin();
 }
 
 /**
@@ -82,12 +86,12 @@ void W25QXXFlash::init(uint8_t spiRate) {
  * @return Byte received
  */
 uint8_t W25QXXFlash::spi_flash_Rec() {
-  const uint8_t returnByte = SPI.transfer(0xFF);
+  const uint8_t returnByte = mySPI.transfer(0xFF);
   return returnByte;
 }
 
 uint8_t W25QXXFlash::spi_flash_read_write_byte(uint8_t data) {
-  const uint8_t returnByte = SPI.transfer(data);
+  const uint8_t returnByte = mySPI.transfer(data);
   return returnByte;
 }
 
@@ -100,7 +104,9 @@ uint8_t W25QXXFlash::spi_flash_read_write_byte(uint8_t data) {
  *
  * @details Uses DMA
  */
-void W25QXXFlash::spi_flash_Read(uint8_t* buf, uint16_t nbyte) { SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte); }
+void W25QXXFlash::spi_flash_Read(uint8_t* buf, uint16_t nbyte) {
+  mySPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);
+}
 
 /**
  * @brief  Send a single byte on SPI port
@@ -109,7 +115,7 @@ void W25QXXFlash::spi_flash_Read(uint8_t* buf, uint16_t nbyte) { SPI.dmaTransfer
  *
  * @details
  */
-void W25QXXFlash::spi_flash_Send(uint8_t b) { SPI.send(b); }
+void W25QXXFlash::spi_flash_Send(uint8_t b) { mySPI.transfer(b); }
 
 /**
  * @brief  Write token and then write from 512 byte buffer to SPI (for SD card)
@@ -120,8 +126,8 @@ void W25QXXFlash::spi_flash_Send(uint8_t b) { SPI.send(b); }
  * @details Use DMA
  */
 void W25QXXFlash::spi_flash_SendBlock(uint8_t token, const uint8_t* buf) {
-  SPI.send(token);
-  SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
+  mySPI.transfer(token);
+  mySPI.dmaSend(const_cast<uint8_t*>(buf), 512);
 }
 
 uint16_t W25QXXFlash::W25QXX_ReadID(void) {
diff --git a/Marlin/src/libs/W25Qxx.h b/Marlin/src/libs/W25Qxx.h
index ac3e8a169b..eddae6b1f2 100644
--- a/Marlin/src/libs/W25Qxx.h
+++ b/Marlin/src/libs/W25Qxx.h
@@ -23,6 +23,8 @@
 
 #include <stdint.h>
 
+#include HAL_PATH(../HAL, MarlinSPI.h)
+
 #define W25X_WriteEnable        0x06
 #define W25X_WriteDisable       0x04
 #define W25X_ReadStatusReg      0x05
@@ -49,6 +51,8 @@
 #define SPI_FLASH_PerWritePageSize   256
 
 class W25QXXFlash {
+private:
+  static MarlinSPI mySPI;
 public:
   void init(uint8_t spiRate);
   static uint8_t spi_flash_Rec();
diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp
index 928c9ad8b9..825194cf45 100644
--- a/Marlin/src/module/endstops.cpp
+++ b/Marlin/src/module/endstops.cpp
@@ -899,6 +899,9 @@ void Endstops::update() {
         hit = true;
       }
     #endif
+
+    if (TERN0(ENDSTOP_INTERRUPTS_FEATURE, hit)) update();
+
     return hit;
   }
 
diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
index fc432b7e9b..b1b9bb6e0a 100644
--- a/Marlin/src/module/settings.cpp
+++ b/Marlin/src/module/settings.cpp
@@ -1497,7 +1497,7 @@ void MarlinSettings::postprocess() {
       }
       DEBUG_ECHO_START();
       DEBUG_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
-      TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_version());
+      IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_version());
       eeprom_error = true;
     }
     else {
@@ -2325,13 +2325,13 @@ void MarlinSettings::postprocess() {
       if (eeprom_error) {
         DEBUG_ECHO_START();
         DEBUG_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize());
-        TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_index());
+        IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_index());
       }
       else if (working_crc != stored_crc) {
         eeprom_error = true;
         DEBUG_ERROR_START();
         DEBUG_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
-        TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_crc());
+        IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_crc());
       }
       else if (!validating) {
         DEBUG_ECHO_START();
diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp
index 0a83a90ba2..627ecf9ebb 100644
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -180,7 +180,7 @@ bool Stepper::abort_current_block;
 uint32_t Stepper::acceleration_time, Stepper::deceleration_time;
 uint8_t Stepper::steps_per_isr;
 
-TERN(ADAPTIVE_STEP_SMOOTHING,,constexpr) uint8_t Stepper::oversampling_factor;
+IF_DISABLED(ADAPTIVE_STEP_SMOOTHING, constexpr) uint8_t Stepper::oversampling_factor;
 
 xyze_long_t Stepper::delta_error{0};
 
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index d119a72a64..4eb7216511 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -268,7 +268,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
     int16_t Temperature::maxtemp_raw_BED = HEATER_BED_RAW_HI_TEMP;
   #endif
   TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 }
-  TERN(PIDTEMPBED,, millis_t Temperature::next_bed_check_ms);
+  IF_DISABLED(PIDTEMPBED, millis_t Temperature::next_bed_check_ms);
 #endif // HAS_HEATED_BED
 
 #if HAS_TEMP_CHAMBER
@@ -2154,7 +2154,7 @@ void Temperature::disable_all_heaters() {
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
 
-  bool Temperature::over_autostart_threshold() {
+  bool Temperature::auto_job_over_threshold() {
     #if HAS_HOTEND
       HOTEND_LOOP() if (degTargetHotend(e) > (EXTRUDE_MINTEMP) / 2) return true;
     #endif
@@ -2162,8 +2162,8 @@ void Temperature::disable_all_heaters() {
         || TERN0(HAS_HEATED_CHAMBER, degTargetChamber() > CHAMBER_MINTEMP);
   }
 
-  void Temperature::check_timer_autostart(const bool can_start, const bool can_stop) {
-    if (over_autostart_threshold()) {
+  void Temperature::auto_job_check_timer(const bool can_start, const bool can_stop) {
+    if (auto_job_over_threshold()) {
       if (can_start) startOrResumeJob();
     }
     else if (can_stop) {
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index 57b0fecbcc..c3c3ce2d8b 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -392,7 +392,7 @@ class Temperature {
 
     #if HAS_HEATED_BED
       TERN_(WATCH_BED, static bed_watch_t watch_bed);
-      TERN(PIDTEMPBED,,static millis_t next_bed_check_ms);
+      IF_DISABLED(PIDTEMPBED, static millis_t next_bed_check_ms);
       #ifdef BED_MINTEMP
         static int16_t mintemp_raw_BED;
       #endif
@@ -731,8 +731,8 @@ class Temperature {
       /**
        * Methods to check if heaters are enabled, indicating an active job
        */
-      static bool over_autostart_threshold();
-      static void check_timer_autostart(const bool can_start, const bool can_stop);
+      static bool auto_job_over_threshold();
+      static void auto_job_check_timer(const bool can_start, const bool can_stop);
     #endif
 
     /**
diff --git a/Marlin/src/module/thermistor/thermistor_503.h b/Marlin/src/module/thermistor/thermistor_503.h
new file mode 100644
index 0000000000..fc4bffffdb
--- /dev/null
+++ b/Marlin/src/module/thermistor/thermistor_503.h
@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Zonestar (Z8XM2) Heated Bed thermistor. Added By AvanOsch
+// These are taken from the Zonestar settings in original Repetier firmware: Z8XM2_ZRIB_LCD12864_V51.zip
+const temp_entry_t temptable_503[] PROGMEM = {
+   { OV(  12), 300 },
+   { OV(  27), 270 },
+   { OV(  47), 250 },
+   { OV(  68), 230 },
+   { OV(  99), 210 },
+   { OV( 120), 200 },
+   { OV( 141), 190 },
+   { OV( 171), 180 },
+   { OV( 201), 170 },
+   { OV( 261), 160 },
+   { OV( 321), 150 },
+   { OV( 401), 140 },
+   { OV( 451), 130 },
+   { OV( 551), 120 },
+   { OV( 596), 110 },
+   { OV( 626), 105 },
+   { OV( 666), 100 },
+   { OV( 697), 90 },
+   { OV( 717), 85 },
+   { OV( 798), 69 },
+   { OV( 819), 65 },
+   { OV( 870), 55 },
+   { OV( 891), 51 },
+   { OV( 922), 39 },
+   { OV( 968), 28 },
+   { OV( 980), 23 },
+   { OV( 991), 17 },
+   { OV( 1001), 9 },
+   { OV(1021), -27 },
+   { OV(1023), -200}
+};
diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h
index f90361d9a3..ab92102de3 100644
--- a/Marlin/src/module/thermistor/thermistors.h
+++ b/Marlin/src/module/thermistor/thermistors.h
@@ -75,6 +75,9 @@ typedef struct { int16_t value, celsius; } temp_entry_t;
 #if ANY_THERMISTOR_IS(502) // Unknown thermistor used by the Zonestar Průša P802M hot bed
   #include "thermistor_502.h"
 #endif
+#if ANY_THERMISTOR_IS(503) // Zonestar (Z8XM2) Heated Bed thermistor
+  #include "thermistor_503.h"
+#endif
 #if ANY_THERMISTOR_IS(512) // 100k thermistor in RPW-Ultra hotend, Pull-up = 4.7 kOhm, "unknown model"
   #include "thermistor_512.h"
 #endif
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 1cdafe019d..d77901f029 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -123,7 +123,7 @@
       if (e < EXTRUDERS - 1)
     #endif
     {
-      MOVE_SERVO(_SERVO_NR(e), servo_angles[_SERVO_NR(e)][e]);
+      MOVE_SERVO(_SERVO_NR(e), servo_angles[_SERVO_NR(e)][e & 1]);
       safe_delay(500);
     }
   }
@@ -799,8 +799,8 @@ void tool_change_prime() {
     // Park
     #if ENABLED(TOOLCHANGE_PARK)
       if (ok) {
-        TERN(TOOLCHANGE_PARK_Y_ONLY,,current_position.x = toolchange_settings.change_point.x);
-        TERN(TOOLCHANGE_PARK_X_ONLY,,current_position.y = toolchange_settings.change_point.y);
+        IF_DISABLED(TOOLCHANGE_PARK_Y_ONLY, current_position.x = toolchange_settings.change_point.x);
+        IF_DISABLED(TOOLCHANGE_PARK_X_ONLY, current_position.y = toolchange_settings.change_point.y);
         planner.buffer_line(current_position, MMM_TO_MMS(TOOLCHANGE_PARK_XY_FEEDRATE), active_extruder);
         planner.synchronize();
       }
@@ -998,8 +998,8 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
       // Toolchange park
       #if ENABLED(TOOLCHANGE_PARK) && DISABLED(SWITCHING_NOZZLE)
         if (can_move_away && toolchange_settings.enable_park) {
-          TERN(TOOLCHANGE_PARK_Y_ONLY,,current_position.x = toolchange_settings.change_point.x);
-          TERN(TOOLCHANGE_PARK_X_ONLY,,current_position.y = toolchange_settings.change_point.y);
+          IF_DISABLED(TOOLCHANGE_PARK_Y_ONLY, current_position.x = toolchange_settings.change_point.x);
+          IF_DISABLED(TOOLCHANGE_PARK_X_ONLY, current_position.y = toolchange_settings.change_point.y);
           planner.buffer_line(current_position, MMM_TO_MMS(TOOLCHANGE_PARK_XY_FEEDRATE), old_tool);
           planner.synchronize();
         }
diff --git a/Marlin/src/pins/esp32/pins_E4D.h b/Marlin/src/pins/esp32/pins_E4D.h
index ebb8e1af7d..2a1f070dda 100644
--- a/Marlin/src/pins/esp32/pins_E4D.h
+++ b/Marlin/src/pins/esp32/pins_E4D.h
@@ -31,7 +31,7 @@
   #error "Oops! Select an ESP32 board in 'Tools > Board.'"
 #elif EXTRUDERS > 1 || E_STEPPERS > 1
   #error "E4d@box only supports one E Stepper. Comment out this line to continue."
-#elif HOTENDS > 2
+#elif HOTENDS > 1
   #error "E4d@box currently supports only one hotend. Comment out this line to continue."
 #endif
 
@@ -39,6 +39,21 @@
 #define BOARD_WEBSITE_URL     "github.com/Exilaus/E4d@box"
 #define DEFAULT_MACHINE_NAME  BOARD_INFO_NAME
 
+//
+// Disable I2S stepper stream
+//
+#undef I2S_STEPPER_STREAM
+
+//
+// Redefine I2S for ESP32
+//
+#undef I2S_WS
+#define I2S_WS                                23
+#undef I2S_BCK
+#define I2S_BCK                               22
+#undef I2S_DATA
+#define I2S_DATA                              21
+
 //
 // Limit Switches
 //
@@ -82,9 +97,11 @@
 #define FAN_PIN                                0
 #define HEATER_BED_PIN                        15
 
-// SPI
+//
+// MicroSD card on SPI
+//
+#define MOSI_PIN                              23
+#define MISO_PIN                              19
+#define SCK_PIN                               18
 #define SDSS                                   5
-#define I2S_STEPPER_STREAM
-#define I2S_WS                                23
-#define I2S_BCK                               22
-#define I2S_DATA                              21
+#define USES_SHARED_SPI                           // SPI is shared by SD card with TMC SPI drivers
diff --git a/Marlin/src/pins/esp32/pins_FYSETC_E4.h b/Marlin/src/pins/esp32/pins_FYSETC_E4.h
new file mode 100644
index 0000000000..af179256e1
--- /dev/null
+++ b/Marlin/src/pins/esp32/pins_FYSETC_E4.h
@@ -0,0 +1,126 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * FYSETC E4 pin assignments
+ * FYSETC E4 is a 3D printer control board based on the ESP32 microcontroller.
+ * Supports 4 stepper drivers, heated bed, single hotend.
+ */
+
+#ifndef ARDUINO_ARCH_ESP32
+  #error "Oops! Select an ESP32 board in 'Tools > Board.'"
+#elif EXTRUDERS > 1 || E_STEPPERS > 1
+  #error "FYSETC E4 only supports one E Stepper. Comment out this line to continue."
+#elif HOTENDS > 1
+  #error "FYSETC E4 currently supports only one hotend. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME       "FYSETC_E4"
+#define DEFAULT_MACHINE_NAME  BOARD_INFO_NAME
+
+//
+// Disable I2S stepper stream
+//
+#undef I2S_STEPPER_STREAM
+#define I2S_WS                                -1
+#define I2S_BCK                               -1
+#define I2S_DATA                              -1
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN                            34
+#define Y_STOP_PIN                            35
+#define Z_STOP_PIN                            15
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            27
+#define X_DIR_PIN                             26
+#define X_ENABLE_PIN                          25
+
+#define Y_STEP_PIN                            33
+#define Y_DIR_PIN                             32
+#define Y_ENABLE_PIN                X_ENABLE_PIN
+
+#define Z_STEP_PIN                            14
+#define Z_DIR_PIN                             12
+#define Z_ENABLE_PIN                X_ENABLE_PIN
+
+#define E0_STEP_PIN                           16
+#define E0_DIR_PIN                            17
+#define E0_ENABLE_PIN               X_ENABLE_PIN
+
+#if HAS_TMC_UART
+  //
+  // TMC2209 stepper drivers
+  //
+
+  //
+  // Hardware serial 1
+  //
+  #define X_HARDWARE_SERIAL              Serial1
+  #define Y_HARDWARE_SERIAL              Serial1
+  #define Z_HARDWARE_SERIAL              Serial1
+  #define E0_HARDWARE_SERIAL             Serial1
+
+  #define TMC_BAUD_RATE 115200
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                            36  // Analog Input
+#define TEMP_BED_PIN                          39  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           2
+#define FAN_PIN                               13
+#define HEATER_BED_PIN                         4
+
+//
+// MicroSD card
+//
+#define MOSI_PIN                              23
+#define MISO_PIN                              19
+#define SCK_PIN                               18
+#define SDSS                                   5
+#define USES_SHARED_SPI                           // SPI is shared by SD card with TMC SPI drivers
+
+/**
+ * Hardware serial pins
+ *
+ * Override these pins in Configuration.h or Configuration_adv.h if needed.
+ *
+ * Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX
+ *       but MRR ESPA does not have enough spare pins for such reassignment.
+ */
+#ifndef HARDWARE_SERIAL1_RX
+  #define HARDWARE_SERIAL1_RX                 21
+#endif
+#ifndef HARDWARE_SERIAL1_TX
+  #define HARDWARE_SERIAL1_TX                 22
+#endif
diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
index 51e48fc8e9..6f84a2a44d 100644
--- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
+++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
@@ -215,9 +215,10 @@
 #define EXPA2_10_PIN                       P0_17
 
 #if HAS_WIRED_LCD
+  #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
+    #error "ANET_FULL_GRAPHICS_LCD_ALT_WIRING only applies to the ANET 1.0 board."
 
-  #if ENABLED(ANET_FULL_GRAPHICS_LCD)
-
+  #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
     #error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_3.h' for details. Comment out this line to continue."
 
    /**
diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
index 2b8682aac7..14bac7d723 100644
--- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
+++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
@@ -233,7 +233,32 @@
  *               EXP2                                              EXP1
  */
 #if HAS_WIRED_LCD
-  #if ENABLED(ANET_FULL_GRAPHICS_LCD)
+  #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
+    #error "ANET_FULL_GRAPHICS_LCD_ALT_WIRING only applies to the ANET 1.0 board."
+
+  #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
+    #error "CAUTION! ANET_FULL_GRAPHICS_LCD requires wiring modifications. See 'pins_BTT_SKR_V1_4.h' for details. Comment out this line to continue."
+
+   /**
+    * 1. Cut the tab off the LCD connector so it can be plugged into the "EXP1" connector the other way.
+    * 2. Swap the LCD's +5V (Pin2) and GND (Pin1) wires. (This is the critical part!)
+    * 3. Rewire the CLK Signal (LCD Pin9) to LCD Pin7. (LCD Pin9 remains open because this pin is open drain.)
+    * 4. A wire is needed to connect the Reset switch at J3 (LCD Pin7) to EXP2 (Pin3) on the board.
+    *
+    * !!! If you are unsure, ask for help! Your motherboard may be damaged in some circumstances !!!
+    *
+    * The ANET_FULL_GRAPHICS_LCD connector plug:
+    *
+    *                  BEFORE                          AFTER
+    *                  _____                           _____
+    *           GND 1 | 1 2 |  2 5V              5V 1 | 1 2 |  2 GND
+    *            CS 3 | 3 4 |  4 BTN_EN2         CS 3 | 3 4 |  4 BTN_EN2
+    *           SID 5 | 5 6    6 BTN_EN1        SID 5 | 5 6    6 BTN_EN1
+    *          open 7 | 7 8 |  8 BTN_ENC        CLK 7 | 7 8 |  8 BTN_ENC
+    *           CLK 9 | 9 10| 10 Beeper        open 9 | 9 10| 10 Beeper
+    *                  -----                           -----
+    *                   LCD                             LCD
+    */
 
     #define LCD_PINS_RS                    P1_23
 
diff --git a/Marlin/src/pins/mega/pins_GT2560_V3_A20.h b/Marlin/src/pins/mega/pins_GT2560_V3_A20.h
index 20cccf148f..c445f5b241 100644
--- a/Marlin/src/pins/mega/pins_GT2560_V3_A20.h
+++ b/Marlin/src/pins/mega/pins_GT2560_V3_A20.h
@@ -25,17 +25,17 @@
  * Geeetech A20M pin assignment
  */
 
-#define LCD_PINS_RS                           5
-#define LCD_PINS_ENABLE                      36
-#define LCD_PINS_D4                          21
-#define LCD_PINS_D7                           6
+#define LCD_PINS_RS                            5
+#define LCD_PINS_ENABLE                       36
+#define LCD_PINS_D4                           21
+#define LCD_PINS_D7                            6
 
 #define SPEAKER  // The speaker can produce tones
 
 #if IS_NEWPANEL
-  #define BTN_EN1                            16
-  #define BTN_EN2                            17
-  #define BTN_ENC                            19
+  #define BTN_EN1                             16
+  #define BTN_EN2                             17
+  #define BTN_ENC                             19
 #endif
 
 #include "pins_GT2560_V3.h"
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 62749a3f6e..5eb4717e78 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -104,13 +104,13 @@
 #elif MB(3DRAG)
   #include "ramps/pins_3DRAG.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(K8200)
-  #include "ramps/pins_K8200.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560 (3DRAG)
+  #include "ramps/pins_K8200.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(K8400)
-  #include "ramps/pins_K8400.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560 (3DRAG)
+  #include "ramps/pins_K8400.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(K8600)
   #include "ramps/pins_K8600.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(K8800)
-  #include "ramps/pins_K8800.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560 (3DRAG)
+  #include "ramps/pins_K8800.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(BAM_DICE)
   #include "ramps/pins_RAMPS.h"                 // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(BAM_DICE_DUE)
@@ -132,7 +132,9 @@
 #elif MB(KFB_2)
   #include "ramps/pins_BIQU_KFB_2.h"            // ATmega2560                             env:mega2560
 #elif MB(ZRIB_V20)
-  #include "ramps/pins_ZRIB_V20.h"              // ATmega1280, ATmega2560                 env:mega1280 env:mega2560 (MKS_GEN_13)
+  #include "ramps/pins_ZRIB_V20.h"              // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
+#elif MB(ZRIB_V52)
+  #include "ramps/pins_ZRIB_V52.h"              // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(FELIX2)
   #include "ramps/pins_FELIX2.h"                // ATmega1280, ATmega2560                 env:mega1280 env:mega2560
 #elif MB(RIGIDBOARD)
@@ -298,27 +300,27 @@
 //
 
 #elif MB(SANGUINOLOLU_11)
-  #include "sanguino/pins_SANGUINOLOLU_11.h"    // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_SANGUINOLOLU_11.h"    // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(SANGUINOLOLU_12)
-  #include "sanguino/pins_SANGUINOLOLU_12.h"    // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_SANGUINOLOLU_12.h"    // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(MELZI)
-  #include "sanguino/pins_MELZI.h"              // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_MELZI.h"              // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(MELZI_V2)
-  #include "sanguino/pins_MELZI_V2.h"           // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_MELZI_V2.h"           // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(MELZI_MAKR3D)
-  #include "sanguino/pins_MELZI_MAKR3D.h"       // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_MELZI_MAKR3D.h"       // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(MELZI_CREALITY)
-  #include "sanguino/pins_MELZI_CREALITY.h"     // ATmega1284P                            env:melzi env:melzi_optimized env:melzi_optiboot
+  #include "sanguino/pins_MELZI_CREALITY.h"     // ATmega1284P                            env:melzi env:melzi_optimized env:melzi_optiboot env:melzi_optiboot_optimized
 #elif MB(MELZI_MALYAN)
-  #include "sanguino/pins_MELZI_MALYAN.h"       // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_MELZI_MALYAN.h"       // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(MELZI_TRONXY)
-  #include "sanguino/pins_MELZI_TRONXY.h"       // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_MELZI_TRONXY.h"       // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(STB_11)
-  #include "sanguino/pins_STB_11.h"             // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_STB_11.h"             // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(AZTEEG_X1)
-  #include "sanguino/pins_AZTEEG_X1.h"          // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_AZTEEG_X1.h"          // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(ZMIB_V2)
-  #include "sanguino/pins_ZMIB_V2.h"            // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_ZMIB_V2.h"            // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 
 //
 // Other ATmega644P, ATmega644, ATmega1284P
@@ -327,27 +329,27 @@
 #elif MB(GEN3_MONOLITHIC)
   #include "sanguino/pins_GEN3_MONOLITHIC.h"    // ATmega644P                             env:sanguino644p
 #elif MB(GEN3_PLUS)
-  #include "sanguino/pins_GEN3_PLUS.h"          // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN3_PLUS.h"          // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(GEN6)
-  #include "sanguino/pins_GEN6.h"               // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN6.h"               // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(GEN6_DELUXE)
-  #include "sanguino/pins_GEN6_DELUXE.h"        // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN6_DELUXE.h"        // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(GEN7_CUSTOM)
-  #include "sanguino/pins_GEN7_CUSTOM.h"        // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN7_CUSTOM.h"        // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(GEN7_12)
-  #include "sanguino/pins_GEN7_12.h"            // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN7_12.h"            // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(GEN7_13)
-  #include "sanguino/pins_GEN7_13.h"            // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN7_13.h"            // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(GEN7_14)
-  #include "sanguino/pins_GEN7_14.h"            // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_GEN7_14.h"            // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(OMCA_A)
   #include "sanguino/pins_OMCA_A.h"             // ATmega644                              env:sanguino644p
 #elif MB(OMCA)
   #include "sanguino/pins_OMCA.h"               // ATmega644P, ATmega644                  env:sanguino644p
 #elif MB(ANET_10)
-  #include "sanguino/pins_ANET_10.h"            // ATmega1284P                            env:sanguino1284p
+  #include "sanguino/pins_ANET_10.h"            // ATmega1284P                            env:sanguino1284p env:sanguino1284p_optimized
 #elif MB(SETHI)
-  #include "sanguino/pins_SETHI.h"              // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p
+  #include "sanguino/pins_SETHI.h"              // ATmega644P, ATmega644, ATmega1284P     env:sanguino644p env:sanguino1284p env:sanguino1284p_optimized
 
 //
 // Teensyduino - AT90USB1286, AT90USB1286P
@@ -665,6 +667,8 @@
   #include "esp32/pins_MRR_ESPE.h"              // ESP32                                  env:esp32
 #elif MB(E4D_BOX)
   #include "esp32/pins_E4D.h"                   // ESP32                                  env:esp32
+#elif MB(FYSETC_E4)
+  #include "esp32/pins_FYSETC_E4.h"             // ESP32                                  env:FYSETC_E4
 
 //
 // Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)
diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h
index b7f0517aac..5a0afdc550 100644
--- a/Marlin/src/pins/ramps/pins_3DRAG.h
+++ b/Marlin/src/pins/ramps/pins_3DRAG.h
@@ -157,7 +157,7 @@
     #define SPINDLE_LASER_PWM_PIN             46  // Hardware PWM
     #define SPINDLE_LASER_ENA_PIN             62  // Pullup!
     #define SPINDLE_DIR_PIN                   48
-  #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL)             // use expansion header if no LCD in use
+  #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL)          // Use expansion header if no LCD in use
     #define SPINDLE_LASER_ENA_PIN             16  // Pullup or pulldown!
     #define SPINDLE_DIR_PIN                   17
   #endif
diff --git a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h
index af1adabbbc..97ef1b4fd8 100644
--- a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h
+++ b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h
@@ -34,9 +34,9 @@
 //
 // M3/M4/M5 - Spindle/Laser Control
 //
-#define SPINDLE_LASER_ENA_PIN                66   // Pullup or pulldown!
-#define SPINDLE_DIR_PIN                      67
-#define SPINDLE_LASER_PWM_PIN                44   // Hardware PWM
+#define SPINDLE_LASER_ENA_PIN                 66  // Pullup or pulldown!
+#define SPINDLE_DIR_PIN                       67
+#define SPINDLE_LASER_PWM_PIN                 44  // Hardware PWM
 
 #include "pins_RAMPS.h"
 
@@ -45,5 +45,5 @@
 //
 #undef TEMP_0_PIN
 #undef TEMP_1_PIN
-#define TEMP_0_PIN                            9   // Analog Input
-#define TEMP_1_PIN                           11   // Analog Input
+#define TEMP_0_PIN                             9  // Analog Input
+#define TEMP_1_PIN                            11  // Analog Input
diff --git a/Marlin/src/pins/ramps/pins_DAGOMA_F5.h b/Marlin/src/pins/ramps/pins_DAGOMA_F5.h
index 667ae47f70..07e46acfe7 100644
--- a/Marlin/src/pins/ramps/pins_DAGOMA_F5.h
+++ b/Marlin/src/pins/ramps/pins_DAGOMA_F5.h
@@ -30,13 +30,13 @@
 //
 // Endstops
 //
-#define X_STOP_PIN                            2
-#define Y_STOP_PIN                            3
-#define Z_STOP_PIN                           15
+#define X_STOP_PIN                             2
+#define Y_STOP_PIN                             3
+#define Z_STOP_PIN                            15
 
-#define FIL_RUNOUT_PIN                       39
+#define FIL_RUNOUT_PIN                        39
 #if EXTRUDERS > 1
-  #define FIL_RUNOUT2_PIN                    14
+  #define FIL_RUNOUT2_PIN                     14
 #endif
 
 //
diff --git a/Marlin/src/pins/ramps/pins_K8400.h b/Marlin/src/pins/ramps/pins_K8400.h
index c36e291598..af687927f4 100644
--- a/Marlin/src/pins/ramps/pins_K8400.h
+++ b/Marlin/src/pins/ramps/pins_K8400.h
@@ -40,8 +40,8 @@
 //
 // Limit Switches
 //
-#define X_STOP_PIN                            3
-#define Y_STOP_PIN                           14
+#define X_STOP_PIN                             3
+#define Y_STOP_PIN                            14
 
 #undef X_MIN_PIN
 #undef X_MAX_PIN
@@ -52,13 +52,13 @@
 // Steppers
 //
 #undef E1_STEP_PIN
-#define E1_STEP_PIN                          32
+#define E1_STEP_PIN                           32
 
 //
 // Heaters / Fans
 //
 #undef HEATER_1_PIN
-#define HEATER_1_PIN                         11
+#define HEATER_1_PIN                          11
 
 //
 // Misc. Functions
@@ -69,5 +69,5 @@
 
 #if Z_STEP_PIN == 26
   #undef Z_STEP_PIN
-  #define Z_STEP_PIN                         32
+  #define Z_STEP_PIN                          32
 #endif
diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_16.h b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h
index 42796acf8b..a4dfca21b4 100644
--- a/Marlin/src/pins/ramps/pins_MKS_BASE_16.h
+++ b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h
@@ -30,30 +30,30 @@
 #endif
 
 #define BOARD_INFO_NAME "MKS BASE 1.6"
-#define MKS_BASE_VERSION                     16
+#define MKS_BASE_VERSION                      16
 
 //
 // Servos
 //
-#define SERVO1_PIN                           12   // Digital 12 / Pin 25
+#define SERVO1_PIN                            12  // Digital 12 / Pin 25
 
 //
 // Omitted RAMPS pins
 //
 #ifndef SERVO2_PIN
-  #define SERVO2_PIN                         -1
+  #define SERVO2_PIN                          -1
 #endif
 #ifndef SERVO3_PIN
-  #define SERVO3_PIN                         -1
+  #define SERVO3_PIN                          -1
 #endif
 #ifndef FILWIDTH_PIN
-  #define FILWIDTH_PIN                       -1
+  #define FILWIDTH_PIN                        -1
 #endif
 #ifndef FIL_RUNOUT_PIN
-  #define FIL_RUNOUT_PIN                     -1
+  #define FIL_RUNOUT_PIN                      -1
 #endif
 #ifndef PS_ON_PIN
-  #define PS_ON_PIN                          -1
+  #define PS_ON_PIN                           -1
 #endif
 
 #include "pins_MKS_BASE_common.h"
diff --git a/Marlin/src/pins/ramps/pins_RL200.h b/Marlin/src/pins/ramps/pins_RL200.h
index 3fccb90276..047ad160be 100644
--- a/Marlin/src/pins/ramps/pins_RL200.h
+++ b/Marlin/src/pins/ramps/pins_RL200.h
@@ -37,16 +37,16 @@
   #error "You must set ([XYZ]|Z2|E0)_DRIVER_TYPE to DRV8825 in Configuration.h for RL200."
 #endif
 
-#define E0_STEP_PIN                          26   // (RUMBA E1 pins)
-#define E0_DIR_PIN                           25
-#define E0_ENABLE_PIN                        27
+#define E0_STEP_PIN                           26  // (RUMBA E1 pins)
+#define E0_DIR_PIN                            25
+#define E0_ENABLE_PIN                         27
 
-#define E1_STEP_PIN                          29   // (RUMBA E2 pins)
-#define E1_DIR_PIN                           28
-#define E1_ENABLE_PIN                        39
+#define E1_STEP_PIN                           29  // (RUMBA E2 pins)
+#define E1_DIR_PIN                            28
+#define E1_ENABLE_PIN                         39
 
-#define Z2_STEP_PIN                          23   // (RUMBA E0 pins)
-#define Z2_DIR_PIN                           22
-#define Z2_ENABLE_PIN                        24
+#define Z2_STEP_PIN                           23  // (RUMBA E0 pins)
+#define Z2_DIR_PIN                            22
+#define Z2_ENABLE_PIN                         24
 
 #include "pins_RUMBA.h"
diff --git a/Marlin/src/pins/ramps/pins_TANGO.h b/Marlin/src/pins/ramps/pins_TANGO.h
index 715444cee2..451d2f874d 100644
--- a/Marlin/src/pins/ramps/pins_TANGO.h
+++ b/Marlin/src/pins/ramps/pins_TANGO.h
@@ -27,26 +27,26 @@
 
 #define BOARD_INFO_NAME "Tango"
 
-#define FAN_PIN                               8
-#define FAN1_PIN                             -1
+#define FAN_PIN                                8
+#define FAN1_PIN                              -1
 
 #ifndef E0_AUTO_FAN_PIN
-  #define E0_AUTO_FAN_PIN                     7
+  #define E0_AUTO_FAN_PIN                      7
 #endif
 
 #ifndef TEMP_0_PIN
   #if TEMP_SENSOR_0 == -1
-    #define TEMP_0_PIN                       10   // Analog Input (connector *K1* on Tango thermocouple ADD ON is used)
+    #define TEMP_0_PIN                        10  // Analog Input (connector *K1* on Tango thermocouple ADD ON is used)
   #else
-    #define TEMP_0_PIN                       15   // Analog Input (default connector for thermistor *T0* on rumba board is used)
+    #define TEMP_0_PIN                        15  // Analog Input (default connector for thermistor *T0* on rumba board is used)
   #endif
 #endif
 
 #ifndef TEMP_1_PIN
   #if TEMP_SENSOR_1 == -1
-    #define TEMP_1_PIN                        9   // Analog Input (connector *K2* on Tango thermocouple ADD ON is used)
+    #define TEMP_1_PIN                         9  // Analog Input (connector *K2* on Tango thermocouple ADD ON is used)
   #else
-    #define TEMP_1_PIN                       14   // Analog Input (default connector for thermistor *T1* on rumba board is used)
+    #define TEMP_1_PIN                        14  // Analog Input (default connector for thermistor *T1* on rumba board is used)
   #endif
 #endif
 
diff --git a/Marlin/src/pins/ramps/pins_VORON.h b/Marlin/src/pins/ramps/pins_VORON.h
index 40ec71b6f0..9ab6573468 100644
--- a/Marlin/src/pins/ramps/pins_VORON.h
+++ b/Marlin/src/pins/ramps/pins_VORON.h
@@ -28,7 +28,7 @@
 
 #define BOARD_INFO_NAME "VORON Design v2"
 
-#define RAMPS_D8_PIN                         11
+#define RAMPS_D8_PIN                          11
 
 #include "pins_RAMPS.h"
 
@@ -36,17 +36,17 @@
 // Heaters / Fans
 //
 #undef FAN_PIN
-#define FAN_PIN                               5   // Using the pin for the controller fan since controller fan is always on.
-#define CONTROLLER_FAN_PIN                    8
+#define FAN_PIN                                5  // Using the pin for the controller fan since controller fan is always on.
+#define CONTROLLER_FAN_PIN                     8
 
 //
 // Auto fans
 //
 #ifndef E0_AUTO_FAN_PIN
-  #define E0_AUTO_FAN_PIN                     6   // Servo pin 6 for E3D Fan
+  #define E0_AUTO_FAN_PIN                      6  // Servo pin 6 for E3D Fan
 #endif
 #ifndef E1_AUTO_FAN_PIN
-  #define E1_AUTO_FAN_PIN                     6   // Servo pin 6 for E3D Fan (same pin for both extruders since it's the same fan)
+  #define E1_AUTO_FAN_PIN                      6  // Servo pin 6 for E3D Fan (same pin for both extruders since it's the same fan)
 #endif
 
 //
diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V52.h b/Marlin/src/pins/ramps/pins_ZRIB_V52.h
new file mode 100644
index 0000000000..983c840bbc
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_ZRIB_V52.h
@@ -0,0 +1,159 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * ZRIB V5.2 Based on MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping
+ */
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+  #error "ZRIB V5.2 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_INFO_NAME "ZRIB V5.2"
+
+#define MKS_BASE_VERSION                      14
+#define IS_RAMPS_EFB
+
+//
+// Heaters / Fans
+//
+#define FAN_PIN                                9  // PH6 ** Pin18 ** PWM9
+#define FAN1_PIN                               6
+
+//
+// Extra Extruder / Stepper for V5.2
+//
+#define E2_STEP_PIN                            4
+#define E2_DIR_PIN                             5
+#define E2_ENABLE_PIN                         22
+
+#include "pins_MKS_BASE_common.h"
+
+/*
+  Available connectors on MKS BASE v1.4 (Basically same as ZRIB V5.2)
+
+   =======
+   | GND |
+   |-----|   E0
+   |  10 |                (10)  PB4 ** Pin23 ** PWM10
+   |-----|
+   | GND |
+   |-----|   E1
+   |  7  |                ( 7)  PH4 ** Pin16 ** PWM7
+   |-----|
+   | GND |
+   |-----|   FAN
+   |  9  |                ( 9)  PH6 ** Pin18 ** PWM9
+   =======
+
+   =======
+   | GND |
+   |-----|   Heated Bed
+   |  8  |                ( 8)  PH5 ** Pin17 ** PWM8
+   =======
+
+   ==========
+   | 12-24V |
+   |--------|   Power
+   |  GND   |
+   ==========
+
+  XS3 Connector
+   =================
+   | 65 | GND | 5V |      (65)  PK3 ** Pin86 ** A11
+   |----|-----|----|
+   | 66 | GND | 5V |      (66)  PK4 ** Pin85 ** A12
+   =================
+
+  Servos Connector
+   =================
+   | 11 | GND | 5V |      (11)  PB5 ** Pin24 ** PWM11
+   |----|-----|----|
+   | 12 | GND | 5V |      (12)  PB6 ** Pin25 ** PWM12
+   =================
+
+  ICSP
+   =================
+   | 5V | 51 | GND |      (51)  PB2 ** Pin21 ** SPI_MOSI
+   |----|----|-----|
+   | 50 | 52 | RST |      (50)  PB3 ** Pin22 ** SPI_MISO
+   =================      (52)  PB1 ** Pin20 ** SPI_SCK
+
+  XS6/AUX-1 Connector
+   ======================
+   | 5V | GND | NC | 20 | (20)  PD1 ** Pin44 ** I2C_SDA
+   |----|-----|----|----|
+   | 50 |  51 | 52 | 21 | (50)  PB3 ** Pin22 ** SPI_MISO
+   ====================== (51)  PB2 ** Pin21 ** SPI_MOSI
+                          (52)  PB1 ** Pin20 ** SPI_SCK
+                          (21)  PD0 ** Pin43 ** I2C_SCL
+
+  Temperature
+   ==================================
+   | GND | 69 | GND | 68 | GND | 67 |
+   ==================================
+                          (69)  PK7 ** Pin82 ** A15
+                          (68)  PK6 ** Pin83 ** A14
+                          (67)  PK5 ** Pin84 ** A13
+
+  Limit Switches
+   ============
+   |  2 | GND | X+        ( 2)  PE4 ** Pin6  ** PWM2
+   |----|-----|
+   |  3 | GND | X-        ( 3)  PE5 ** Pin7  ** PWM3
+   |----|-----|
+   | 15 | GND | Y+        (15)  PJ0 ** Pin63 ** USART3_RX
+   |----|-----|
+   | 14 | GND | Y-        (14)  PJ1 ** Pin64 ** USART3_TX
+   |----|-----|
+   | 19 | GND | Z+        (19)  PD2 ** Pin45 ** USART1_RX
+   |----|-----|
+   | 18 | GND | Z-        (18)  PD3 ** Pin46 ** USART1_TX
+   ============
+
+  EXP1
+   ============
+   |  37 | 35 |           (37)  PC0 ** Pin53 ** D37
+   |-----|----|           (35)  PC2 ** Pin55 ** D35
+   |  17 | 16 |           (17)  PH0 ** Pin12 ** USART2_RX
+   |-----|----|           (16)  PH1 ** Pin13 ** USART2_TX
+   |  23 | 25 |           (23)  PA1 ** Pin77 ** D23
+   |-----|----|           (25)  PA3 ** Pin75 ** D25
+   |  27 | 29 |           (27)  PA5 ** Pin73 ** D27
+   |-----|----|           (29)  PA7 ** Pin71 ** D29
+   | GND | 5V |
+   ============
+
+  EXP2
+   ============
+   |  50 | 52 |           (50)  PB3 ** Pin22 ** SPI_MISO
+   |-----|----|           (52)  PB1 ** Pin20 ** SPI_SCK
+   |  31 | 53 |           (31)  PC6 ** Pin59 ** D31
+   |-----|----|           (53)  PB0 ** Pin19 ** SPI_SS
+   |  33 | 51 |           (33)  PC4 ** Pin57 ** D33
+   |-----|----|           (51)  PB2 ** Pin21 ** SPI_MOSI
+   |  49 | 41 |           (49)  PL0 ** Pin35 ** D49
+   |-----|----|           (41)  PG0 ** Pin51 ** D41
+   | GND | NC |
+   ============
+*/
diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h
index d48db36287..81c0fe562d 100644
--- a/Marlin/src/pins/sanguino/pins_ANET_10.h
+++ b/Marlin/src/pins/sanguino/pins_ANET_10.h
@@ -145,13 +145,16 @@
  *
  * Only the following displays are supported:
  *  ZONESTAR_LCD
- *  ANET_FULL_GRAPHICS_LCD
+ *  ANET_FULL_GRAPHICS_LCD(_ALT_WIRING)?
  *  REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  */
 
 #if HAS_WIRED_LCD
+
   #define LCD_SDSS                            28
+
   #if HAS_ADC_BUTTONS
+
     #define SERVO0_PIN                        27  // free for BLTouch/3D-Touch
     #define LCD_PINS_RS                       28
     #define LCD_PINS_ENABLE                   29
@@ -160,26 +163,49 @@
     #define LCD_PINS_D6                       16
     #define LCD_PINS_D7                       17
     #define ADC_KEYPAD_PIN                     1
+
   #elif IS_RRD_FG_SC
+
     // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
     // display using an adapter board  // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
     // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748
-    #define SERVO0_PIN                        29  // free for BLTouch/3D-Touch
-    #define BEEPER_PIN                        17
-    #define LCD_PINS_RS                       27
-    #define LCD_PINS_ENABLE                   28
-    #define LCD_PINS_D4                       30
-    #define BTN_EN1                           11
-    #define BTN_EN2                           10
-    #define BTN_ENC                           16
-    #define BOARD_ST7920_DELAY_1 DELAY_NS(0)
-    #define BOARD_ST7920_DELAY_2 DELAY_NS(63)
-    #define BOARD_ST7920_DELAY_3 DELAY_NS(125)
-    #define STD_ENCODER_PULSES_PER_STEP        4
-    #define STD_ENCODER_STEPS_PER_MENU_ITEM    1
+
+    #if ENABLED(ANET_FULL_GRAPHICS_LCD_ALT_WIRING)
+      #define SERVO0_PIN                      30
+      #define BEEPER_PIN                      27
+      #define LCD_PINS_RS                     29
+      #define LCD_PINS_ENABLE                 16
+      #define LCD_PINS_D4                     11
+      #define BTN_EN1                         28
+      #define BTN_EN2                         10
+      #define BTN_ENC                         17
+      #define BOARD_ST7920_DELAY_1 DELAY_NS(250)
+      #define BOARD_ST7920_DELAY_2 DELAY_NS(250)
+      #define BOARD_ST7920_DELAY_3 DELAY_NS(250)
+    #else
+      #define SERVO0_PIN                      29  // free for BLTouch/3D-Touch
+      #define BEEPER_PIN                      17
+      #define LCD_PINS_RS                     27
+      #define LCD_PINS_ENABLE                 28
+      #define LCD_PINS_D4                     30
+      #define BTN_EN1                         11
+      #define BTN_EN2                         10
+      #define BTN_ENC                         16
+      #define BOARD_ST7920_DELAY_1 DELAY_NS(0)
+      #define BOARD_ST7920_DELAY_2 DELAY_NS(63)
+      #define BOARD_ST7920_DELAY_3 DELAY_NS(125)
+    #endif
+
   #endif
+
 #else
+
   #define SERVO0_PIN                          27
+
+#endif
+
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN              SERVO0_PIN
 #endif
 
 /**
diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
index 9f406c1f78..f110fe5794 100644
--- a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
+++ b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
@@ -62,17 +62,17 @@
 #undef LCD_PINS_D6
 #undef LCD_PINS_D7
 
-#define LCD_SDSS                             31   // Smart Controller SD card reader (rather than the Melzi)
-#define LCD_PINS_RS                          28   // ST9720 CS
-#define LCD_PINS_ENABLE                      17   // ST9720 DAT
-#define LCD_PINS_D4                          30   // ST9720 CLK
+#define LCD_SDSS                              31  // Smart Controller SD card reader (rather than the Melzi)
+#define LCD_PINS_RS                           28  // ST9720 CS
+#define LCD_PINS_ENABLE                       17  // ST9720 DAT
+#define LCD_PINS_D4                           30  // ST9720 CLK
 
 #if ENABLED(BLTOUCH)
-  #define SERVO0_PIN                         27
+  #define SERVO0_PIN                          27
   #undef BEEPER_PIN
 #elif ENABLED(FILAMENT_RUNOUT_SENSOR)
   #ifndef FIL_RUNOUT_PIN
-    #define FIL_RUNOUT_PIN                   27
+    #define FIL_RUNOUT_PIN                    27
   #endif
   #if FIL_RUNOUT_PIN == BEEPER_PIN
     #undef BEEPER_PIN
@@ -81,7 +81,7 @@
 
 #if ENABLED(MINIPANEL)
   #undef DOGLCD_CS
-  #define DOGLCD_CS LCD_PINS_RS
+  #define DOGLCD_CS                  LCD_PINS_RS
 #endif
 
 /**
diff --git a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h
index 5014620c6b..8b4faeeaf9 100644
--- a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h
+++ b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h
@@ -50,9 +50,9 @@
 #undef BTN_EN2
 #undef BTN_ENC
 
-#define LCD_PINS_RS                          17   // ST9720 CS
-#define LCD_PINS_ENABLE                      16   // ST9720 DAT
-#define LCD_PINS_D4                          11   // ST9720 CLK
-#define BTN_EN1                              30
-#define BTN_EN2                              29
-#define BTN_ENC                              28
+#define LCD_PINS_RS                           17  // ST9720 CS
+#define LCD_PINS_ENABLE                       16  // ST9720 DAT
+#define LCD_PINS_D4                           11  // ST9720 CLK
+#define BTN_EN1                               30
+#define BTN_EN2                               29
+#define BTN_ENC                               28
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h
index 8d384c7396..165c41ffe7 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h
@@ -25,7 +25,7 @@
 
 #define BOARD_INFO_NAME "BTT SKR Mini E3 V1.2"
 
-#define NEOPIXEL_PIN                       PC7    // LED driving pin
+#define NEOPIXEL_PIN                        PC7   // LED driving pin
 
 /**
  * TMC2208/TMC2209 stepper drivers
@@ -34,17 +34,17 @@
   //
   // Software serial
   //
-  #define X_SERIAL_TX_PIN                  PB15
-  #define X_SERIAL_RX_PIN                  PB15
+  #define X_SERIAL_TX_PIN                   PB15
+  #define X_SERIAL_RX_PIN                   PB15
 
-  #define Y_SERIAL_TX_PIN                  PC6
-  #define Y_SERIAL_RX_PIN                  PC6
+  #define Y_SERIAL_TX_PIN                   PC6
+  #define Y_SERIAL_RX_PIN                   PC6
 
-  #define Z_SERIAL_TX_PIN                  PC10
-  #define Z_SERIAL_RX_PIN                  PC10
+  #define Z_SERIAL_TX_PIN                   PC10
+  #define Z_SERIAL_RX_PIN                   PC10
 
-  #define E0_SERIAL_TX_PIN                 PC11
-  #define E0_SERIAL_RX_PIN                 PC11
+  #define E0_SERIAL_TX_PIN                  PC11
+  #define E0_SERIAL_RX_PIN                  PC11
 
   // Reduce baud rate to improve software serial reliability
   #define TMC_BAUD_RATE 19200
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
index 50257f4f46..b65411be8a 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
@@ -62,6 +62,13 @@
   #define FIL_RUNOUT_PIN                    PC15  // "E0-STOP"
 #endif
 
+//
+// Power-loss Detection
+//
+#ifndef POWER_LOSS_PIN
+  #define POWER_LOSS_PIN                    PC12  // Power Loss Detection: PWR-DET
+#endif
+
 //
 // Steppers
 //
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h
index 1d8f4f684b..aa83a0cb04 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h
@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#if NOT_TARGET(__STM32F1__, __STM32F4__)
-  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
 /**
@@ -32,6 +32,8 @@
 #define BOARD_INFO_NAME      "Chitu3D"
 #define DEFAULT_MACHINE_NAME "STM32F103RET6"
 
+#define BOARD_NO_NATIVE_USB
+
 // Enable I2C_EEPROM for testing
 //#define I2C_EEPROM
 
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
index 1818727372..b13fde026c 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#if NOT_TARGET(__STM32F1__, __STM32F4__)
-  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
 /**
@@ -32,6 +32,8 @@
 #define BOARD_INFO_NAME      "Chitu3D V5"
 #define DEFAULT_MACHINE_NAME "STM32F103ZET6"
 
+#define BOARD_NO_NATIVE_USB
+
 #define DISABLE_JTAG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
index 1d6e6b3983..a015fb2704 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#if NOT_TARGET(__STM32F1__, __STM32F4__)
-  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
 /**
@@ -32,6 +32,8 @@
 #define BOARD_INFO_NAME      "Chitu3D"
 #define DEFAULT_MACHINE_NAME "STM32F103ZET6"
 
+#define BOARD_NO_NATIVE_USB
+
 #define DISABLE_JTAG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
index eb910dd846..c6f2dd8b80 100644
--- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
+++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
@@ -26,9 +26,7 @@
 
 #if NOT_TARGET(__STM32F1__)
   #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
-#endif
-
-#if HOTENDS > 1 || E_STEPPERS > 1
+#elif HOTENDS > 1 || E_STEPPERS > 1
   #error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue."
 #endif
 
@@ -39,6 +37,8 @@
   #define DEFAULT_MACHINE_NAME "Ender 3 V2"
 #endif
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // EEPROM
 //
diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
index d463303310..c9c5bbf2d4 100644
--- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
+++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
@@ -38,6 +38,8 @@
 #define BOARD_INFO_NAME      "FLSun HiSpeedV1"
 #define BOARD_WEBSITE_URL    "github.com/Foxies-CSTL"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
index 4f555c373f..073d6c7368 100644
--- a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
@@ -16,17 +16,17 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
-#ifndef __STM32F1__
+#if NOT_TARGET(__STM32F1__)
   #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
 #define BOARD_INFO_NAME   "FLY_MINI"
-#define BOARD_WEBSITE_URL    "github.com/FLYmaker"
+#define BOARD_WEBSITE_URL "github.com/FLYmaker"
 #define DISABLE_JTAG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h
index bab6182e4f..aebb776b29 100644
--- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h
+++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h
@@ -28,6 +28,8 @@
 #define BOARD_INFO_NAME   "FYSETC AIO II"
 #define BOARD_WEBSITE_URL "fysetc.com"
 
+#define BOARD_NO_NATIVE_USB
+
 #define DISABLE_JTAG
 
 #define pins_v2_20190128                          // new pins define
diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
index deca1a0546..b8a4ccf770 100644
--- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
+++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
@@ -29,11 +29,12 @@
 
 #define BOARD_INFO_NAME   "FYSETC Cheetah"
 #define BOARD_WEBSITE_URL "fysetc.com"
-// https://github.com/FYSETC/Cheetah
 
 // Ignore temp readings during development.
 //#define BOGUS_TEMPERATURE_GRACE_PERIOD    2000
 
+#define BOARD_NO_NATIVE_USB
+
 #define DISABLE_JTAG
 
 #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h
index 5e8bd11b4b..65b16755ca 100644
--- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h
+++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h
@@ -36,7 +36,7 @@
 #undef RGB_LED_G_PIN
 #undef RGB_LED_B_PIN
 
-#define FAN1_PIN                           PB0    // Fan1
+#define FAN1_PIN                            PB0   // Fan1
 
 #if HAS_TMC_UART
 
@@ -47,17 +47,17 @@
   //
   // Software serial
   //
-  #define X_SERIAL_TX_PIN                  PA11
-  #define X_SERIAL_RX_PIN                  PA12
+  #define X_SERIAL_TX_PIN                   PA11
+  #define X_SERIAL_RX_PIN                   PA12
 
-  #define Y_SERIAL_TX_PIN                  PB6
-  #define Y_SERIAL_RX_PIN                  PB7
+  #define Y_SERIAL_TX_PIN                   PB6
+  #define Y_SERIAL_RX_PIN                   PB7
 
-  #define Z_SERIAL_TX_PIN                  PB10
-  #define Z_SERIAL_RX_PIN                  PB11
+  #define Z_SERIAL_TX_PIN                   PB10
+  #define Z_SERIAL_RX_PIN                   PB11
 
-  #define E0_SERIAL_TX_PIN                 PA2
-  #define E0_SERIAL_RX_PIN                 PA3
+  #define E0_SERIAL_TX_PIN                  PA2
+  #define E0_SERIAL_RX_PIN                  PA3
 
   // Reduce baud rate to improve software serial reliability
   #define TMC_BAUD_RATE 19200
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
index 00c5721384..52b857ac0a 100644
--- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
@@ -33,6 +33,8 @@
 #define BOARD_INFO_NAME      "GTM32 Pro VB"
 #define DEFAULT_MACHINE_NAME "STM32F103VET6"
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
index b10748e57f..85d0be6d6b 100644
--- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
+++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
@@ -33,6 +33,8 @@
 #define BOARD_INFO_NAME      "GTM32 Pro VB"
 #define DEFAULT_MACHINE_NAME "STM32F103VET6"
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
index 00c5721384..52b857ac0a 100644
--- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
+++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
@@ -33,6 +33,8 @@
 #define BOARD_INFO_NAME      "GTM32 Pro VB"
 #define DEFAULT_MACHINE_NAME "STM32F103VET6"
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
index b913530f67..292119ce02 100644
--- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
+++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
@@ -33,6 +33,8 @@
 #define BOARD_INFO_NAME      "GTM32 Pro VB"
 #define DEFAULT_MACHINE_NAME "M201"
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG
 
 //
diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
index 0dd8fb69a5..f86acf1f24 100644
--- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
+++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h
@@ -33,8 +33,11 @@
 #elif HOTENDS > 1 || E_STEPPERS > 1
   #error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue."
 #endif
+
 #define BOARD_INFO_NAME "JGAurora A5S A1 board"
 
+#define BOARD_NO_NATIVE_USB
+
 #ifndef STM32_XL_DENSITY
   #define STM32_XL_DENSITY
 #endif
diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
index c685570707..fd5c573878 100644
--- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
+++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
@@ -31,6 +31,8 @@
 #define BOARD_INFO_NAME "Longer3D"
 #define ALFAWISE_UX0                              // Common to all Longer3D STM32F1 boards (used for Open drain mosfets)
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG                           //  We still want to debug with STLINK...
 #define DISABLE_JTAG                              //  We free the jtag pins (PA15) but keep STLINK
                                                   //  Release PB4 (STEP_X_PIN) from JTAG NRST role.
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
index e6c8098f2a..581dd5375b 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
@@ -35,6 +35,8 @@
 
 #define BOARD_INFO_NAME "MKS Robin"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
index 2b7417c29f..9c0f2deeab 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
@@ -35,6 +35,8 @@
 
 #define BOARD_INFO_NAME "MKS Robin e3p"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
index ffcdc3cfdf..2dcd7780af 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
@@ -29,6 +29,8 @@
   #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
+#define BOARD_NO_NATIVE_USB
+
 #define BOARD_WEBSITE_URL "github.com/makerbase-mks"
 
 //#define DISABLE_DEBUG
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
index ab5350e4de..d7c4aebe37 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
@@ -32,6 +32,8 @@
 #endif
 #define BOARD_WEBSITE_URL "github.com/makerbase-mks"
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG
 #define DISABLE_JTAG
 
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
index 4c1299fe02..f8b8a891be 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
@@ -36,6 +36,8 @@
 #endif
 #define BOARD_WEBSITE_URL "github.com/makerbase-mks"
 
+#define BOARD_NO_NATIVE_USB
+
 //#define DISABLE_DEBUG
 #define DISABLE_JTAG
 
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
index 8c63f79732..2406c22d55 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
@@ -33,6 +33,8 @@
 
 #define BOARD_INFO_NAME "MKS Robin Mini"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
index 5c3dfc2ad8..3c9b2f5b59 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
@@ -33,6 +33,8 @@
 
 #define BOARD_INFO_NAME "MKS Robin Nano"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
@@ -191,6 +193,9 @@
   #define FSMC_DMA_DEV                      DMA2
   #define FSMC_DMA_CHANNEL               DMA_CH5
 
+  #define TFT_CS_PIN                 FSMC_CS_PIN
+  #define TFT_RS_PIN                 FSMC_RS_PIN
+
   #define TOUCH_BUTTONS_HW_SPI
   #define TOUCH_BUTTONS_HW_SPI_DEVICE          2
 
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
index e009d34d94..9c1d073da6 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
@@ -35,6 +35,8 @@
 
 #define BOARD_INFO_NAME "MKS Robin nano V2.0"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
index 639a8f0579..8f1a405e8c 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
@@ -33,6 +33,8 @@
 
 #define BOARD_INFO_NAME "MKS Robin pro"
 
+#define BOARD_NO_NATIVE_USB
+
 //
 // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
 //
diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
index 3ebc4bca57..ef82b71f56 100644
--- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#if NOT_TARGET(__STM32F1__, __STM32F4__)
-  #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
+#if NOT_TARGET(__STM32F1__)
+  #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
 /**
diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
index 8314858d13..2fc34ce296 100644
--- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
+++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
@@ -35,6 +35,9 @@
 #endif
 
 #define BOARD_INFO_NAME "Trigorilla Pro"
+
+#define BOARD_NO_NATIVE_USB
+
 #define DISABLE_JTAG
 
 //
diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
index 8638e9a4cf..656849487a 100644
--- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
+++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
@@ -34,8 +34,8 @@
   #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
 #endif
 
-// Change the priority to 3. Priority 2 is for software serial.
-//#define TEMP_TIMER_IRQ_PRIO                  3
+// Avoid conflict with TIMER_TONE defined in variant
+#define STEP_TIMER 10
 
 //
 // EEPROM Emulation
diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h
index 021ef1d5f6..b12c12c848 100644
--- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h
+++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h
@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp
index a633440ff6..5a914050c4 100644
--- a/Marlin/src/sd/cardreader.cpp
+++ b/Marlin/src/sd/cardreader.cpp
@@ -637,7 +637,7 @@ bool CardReader::fileExists(const char * const path) {
   if (fname) {
     diveDir->rewind();
     selectByName(*diveDir, fname);
-    diveDir->close();
+    //diveDir->close();
   }
   return !!fname;
 }
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp
index 6d2182cb8b..358b49d5b4 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 /* What follows is a modified version of the MAX3421e originally defined in
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h
index 07ca811a4d..5c3b852d55 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h
@@ -16,7 +16,7 @@
  *   GNU General Public License for more details.                           *
  *                                                                          *
  *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <https://www.gnu.org/licenses/>.                              *
+ *   location: <https://www.gnu.org/licenses/>.                             *
  ****************************************************************************/
 
 #pragma once
diff --git a/buildroot/share/PlatformIO/scripts/common-cxxflags.py b/buildroot/share/PlatformIO/scripts/common-cxxflags.py
index ee2afb1d26..a0a3b45043 100644
--- a/buildroot/share/PlatformIO/scripts/common-cxxflags.py
+++ b/buildroot/share/PlatformIO/scripts/common-cxxflags.py
@@ -13,10 +13,10 @@ env.Append(CXXFLAGS=[
 
 # Useful for JTAG debugging
 #
-# It will separe release and debug build folders. 
-# It useful when we need keep two live versions: one debug, for debugging, 
+# It will separe release and debug build folders.
+# It useful when we need keep two live versions: one debug, for debugging,
 # other release, for flashing.
 # Without this, PIO will recompile everything twice for any small change.
-# 
+#
 if env.GetBuildType() == "debug":
 	env['BUILD_DIR'] = '$PROJECT_BUILD_DIR/$PIOENV/debug'
diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies.h b/buildroot/share/PlatformIO/scripts/common-dependencies.h
index f5b36c407e..ed2f46abae 100644
--- a/buildroot/share/PlatformIO/scripts/common-dependencies.h
+++ b/buildroot/share/PlatformIO/scripts/common-dependencies.h
@@ -111,6 +111,9 @@
   #if ENABLED(TOUCH_SCREEN_CALIBRATION)
     #define HAS_MENU_TOUCH_SCREEN
   #endif
+  #if ENABLED(ASSISTED_TRAMMING_WIZARD)
+    #define HAS_MENU_TRAMMING
+  #endif
   #if ENABLED(AUTO_BED_LEVELING_UBL)
     #define HAS_MENU_UBL
   #endif
diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c
index cff269db0b..bee09b15b1 100644
--- a/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c
+++ b/buildroot/share/PlatformIO/variants/BIGTREE_BTT002/PeripheralPins.c
@@ -114,14 +114,10 @@ const PinMap PinMap_I2C_SCL[] = {
 
 #ifdef HAL_TIM_MODULE_ENABLED
 const PinMap PinMap_PWM[] = {
-  {PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4    HEATER0
-  {PD_14, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3    HEATER1
-  {PB_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3    HEATER2
-  {PD_12, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1    BED
-  {PC_8,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3    FAN0
-  {PE_5,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1    FAN1
-  {PE_6,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2    FAN2
-  {PC_9,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4    EXTENSION1-4
+  {PE_5,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1    BED
+  {PE_6,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2    HEATER0
+  {PB_8,  TIM10,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1  FAN0
+  {PB_9,  TIM11,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1  FAN1
 
   /**
    * Unused by specifications on BTT002. (PLEASE CONFIRM)
@@ -132,9 +128,9 @@ const PinMap PinMap_PWM[] = {
    */
   //{PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
   //{PA_0,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
-  //{PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2  BLTOUCH is a "servo"
+  //{PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
   //{PA_1,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
-  //{PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3  BLTOUCH is a "servo"
+  //{PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
   //{PA_2,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
   //{PA_2,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
   //{PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
@@ -154,8 +150,10 @@ const PinMap PinMap_PWM[] = {
   //{PA_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
   //{PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
   //{PB_0,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+  //{PB_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
   //{PB_0,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
   //{PB_1,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+  //{PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
   //{PB_1,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
   //{PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
   //{PB_4,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
@@ -163,9 +161,7 @@ const PinMap PinMap_PWM[] = {
   //{PB_6,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
   //{PB_7,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
   //{PB_8,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
-  //{PB_8,  TIM10,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
   //{PB_9,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
-  //{PB_9,  TIM11,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
   //{PB_10, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
   //{PB_11, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
   //{PB_13, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
@@ -180,7 +176,11 @@ const PinMap PinMap_PWM[] = {
   //{PC_7,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
   //{PC_7,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
   //{PC_8,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+  //{PC_8,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
   //{PC_9,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+  //{PC_9,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
+  //{PD_12, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+  //{PD_14, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
   //{PD_13, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
   //{PD_15, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
   //{PE_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
diff --git a/buildroot/share/git/mfconfig b/buildroot/share/git/mfconfig
new file mode 100755
index 0000000000..3fd5e399cc
--- /dev/null
+++ b/buildroot/share/git/mfconfig
@@ -0,0 +1,183 @@
+#!/usr/bin/env bash
+#
+# mfconfig init source dest
+# mfconfig manual source dest
+#
+# The MarlinFirmware/Configurations layout could be broken up into branches,
+# but this makes management more complicated and requires more commits to
+# perform the same operation, so this uses a single branch with subfolders.
+#
+# init - Initialize the repo with a base commit and changes:
+#   - Source will be an 'import' branch containing all current configs.
+#   - Create an empty 'BASE' branch from 'init-repo'.
+#   - Add Marlin config files, but reset all to defaults.
+#   - Commit this so changes will be clear in following commits.
+#   - Add changed Marlin config files and commit.
+#
+# manual - Manually import changes from the Marlin repo
+#   - Replace 'default' configs with those from the Marlin repo.
+#   - Wait for manual propagation to the rest of the configs.
+#   - Run init with the given 'source' and 'dest'
+#
+
+REPOHOME="`dirname ~/Projects/Maker/Firmware/.`"
+MARLINREPO="$REPOHOME/MarlinFirmware"
+CONFIGREPO="$REPOHOME/Configurations"
+
+CEXA=config/examples
+CDEF=config/default
+BC=Configuration.h
+AC=Configuration_adv.h
+
+COMMIT_STEPS=0
+
+#cd "$CONFIGREPO" 2>/dev/null || { echo "Can't find Configurations repo!" ; exit 1; }
+
+ACTION=${1:-init}
+IMPORT=${2:-"import-2.0.x"}
+EXPORT=${3:-"bugfix-2.0.x"}
+
+echo -n "Doing grhh ... " ; grhh ; echo
+
+if [[ $ACTION == "manual" ]]; then
+
+  #
+  # Copy the latest default configs from MarlinFirmware/Marlin
+  # or one of the import branches here, then use them to construct
+  # a 'BASE' branch with only defaults as a starting point.
+  #
+
+  echo "- Updating '$IMPORT' from Marlin..."
+
+  git checkout $IMPORT || exit
+
+  # Reset from the latest complete state
+  #git reset --hard master
+
+  cp "$MARLINREPO/Marlin/"Configuration*.h "$CDEF/"
+  #git add . && git commit -m "Changes from Marlin ($(date '+%Y-%m-%d %H:%M'))."
+
+  echo "- Fix up the import branch and come back."
+
+  read -p "- Ready to init [y/N] ?" INIT_YES
+  echo
+
+  [[ $INIT_YES == 'Y' || $INIT_YES == 'y' ]] || { echo "Done." ; exit ; }
+
+  ACTION='init'
+fi
+
+if [[ $ACTION == "init" ]]; then
+  #
+  # Copy all configs from a source such as MarlinFirmware/Marlin
+  # or one of the import branches here, then use them to construct
+  # a 'BASE' branch with only defaults as a starting point.
+  #
+
+  echo "- Initializing BASE branch..."
+
+  # Use the import branch as the source
+  git checkout $IMPORT || exit
+
+  # Copy to a temporary location
+  TEMP=$( mktemp -d ) ; cp -R config $TEMP
+
+  # Make sure we're not on the 'BASE' branch...
+  git checkout master >/dev/null 2>&1 || exit
+
+  # Create 'BASE' as a copy of 'init-repo' (README, LICENSE, etc.)
+  git branch -D BASE 2>/dev/null
+  git checkout init-repo -b BASE || exit
+
+  # Copy all config files into place
+  echo "- Copying configs from Marlin..."
+  cp -R "$TEMP/config" .
+
+  # Delete anything that's not a Configuration file
+  find config -type f \! -name "Configuration*" -exec rm "{}" \;
+
+  # DEBUG: Commit the original config files for comparison
+  ((COMMIT_STEPS)) && git add . >/dev/null && git commit -m "Commit for comparison" >/dev/null
+
+  # Init Cartesian configurations to default
+  echo "- Initializing configs to default state..."
+
+  find "$CEXA" -name $BC ! -path */delta/* -print0 \
+    | while read -d $'\0' F ; do cp "$CDEF/$BC" "$F" ; done
+  find "$CEXA" -name $AC ! -path */delta/* -print0 \
+    | while read -d $'\0' F ; do cp "$CDEF/$AC" "$F" ; done
+
+  # DEBUG: Commit the reset for review
+  ((COMMIT_STEPS)) && git add . >/dev/null && git commit -m "Reset Cartesian/SCARA configs..." >/dev/null
+
+  # Create base Delta configurations
+  cp "$CDEF"/* "$CEXA/delta/generic"
+
+  # DEBUG: Commit the reset for review
+  ((COMMIT_STEPS)) && git add . >/dev/null && git commit -m "Reset Generic Delta..." >/dev/null
+
+  cp -R "$TEMP/$CEXA/delta/generic"/Conf* "$CEXA/delta/generic"
+
+  # DEBUG: Commit Generic Delta changes for review
+  ((COMMIT_STEPS)) && git add . >/dev/null && git commit -m "Apply Generic Delta..." >/dev/null
+
+  find "$CEXA/delta" -name $BC ! -path */generic/* -print0 \
+    | while read -d $'\0' F ; do cp "$CEXA/delta/generic/$BC" "$F" ; done
+  find "$CEXA/delta" -name $AC ! -path */generic/* -print0 \
+    | while read -d $'\0' F ; do cp "$CEXA/delta/generic/$AC" "$F" ; done
+
+  # DEBUG: Commit the reset for review
+  ((COMMIT_STEPS)) && git add . >/dev/null && git commit -m "Reset Delta configs..." >/dev/null
+
+  # SCARA configurations
+  find "$CEXA/SCARA" -name $BC \
+    | while read -d $'\0' F ; do cp "$CDEF/$BC" "$F" ; done
+  find "$CEXA/SCARA" -name $AC \
+    | while read -d $'\0' F ; do cp "$CDEF/$AC" "$F" ; done
+
+  # DEBUG: Commit the reset for review or...
+  ((COMMIT_STEPS)) && git add . >/dev/null && git commit -m "Reset SCARA..." >/dev/null
+
+  # Update the %VERSION% in the README.md file
+  SED=$(which gsed || which sed)
+  VERS=$( echo $EXPORT | $SED 's/release-//' )
+  eval "${SED} -E -i~ -e 's/%VERSION%/$VERS/g' README.md"
+  rm -f README.md~
+
+  # NOT DEBUGGING: Commit the 'BASE', ready for customizations
+  ((COMMIT_STEPS)) || git add . >/dev/null && git commit --amend --no-edit >/dev/null
+
+  # Create a new branch from 'BASE' for the final result
+  echo "- Creating '$EXPORT' branch for the result..."
+  git branch -D $EXPORT 2>/dev/null
+  git checkout -b $EXPORT || exit
+
+  # Delete temporary branch
+  git branch -D BASE 2>/dev/null
+
+  echo "- Applying example config customizations..."
+  cp -R "$TEMP/config" .
+  find config -type f \! -name "Configuration*" -exec rm "{}" \;
+
+  echo "- Adding path labels to all configs..."
+  config-labels.py >/dev/null 2>&1
+
+  git add . >/dev/null && git commit -m "Examples Customizations" >/dev/null
+
+  echo "- Copying extras from Marlin..."
+  cp -R "$TEMP/config" .
+
+  # Apply labels again!
+  config-labels.py >/dev/null 2>&1
+
+  git add . >/dev/null && git commit -m "Examples Extras" >/dev/null
+
+  rm -rf $TEMP
+
+  git push -f --set-upstream upstream "$EXPORT"
+
+else
+
+  echo "Usage: mfconfig init|manual|rebase"
+
+fi
diff --git a/buildroot/tests/DUE-tests b/buildroot/tests/DUE-tests
index 0da0d798d0..4a7c492d7b 100755
--- a/buildroot/tests/DUE-tests
+++ b/buildroot/tests/DUE-tests
@@ -14,7 +14,7 @@ opt_set TEMP_SENSOR_BED 2
 opt_set GRID_MAX_POINTS_X 16
 opt_set FANMUX0_PIN 53
 opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
-           FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING ASSISTED_TRAMMING \
+           FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD \
            EEPROM_SETTINGS SDSUPPORT BINARY_FILE_TRANSFER \
            BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
            NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
diff --git a/buildroot/tests/mks_robin_lite-tests b/buildroot/tests/mks_robin_lite-tests
index 34809641ec..d54627e069 100644
--- a/buildroot/tests/mks_robin_lite-tests
+++ b/buildroot/tests/mks_robin_lite-tests
@@ -8,7 +8,7 @@ set -e
 
 restore_configs
 opt_set MOTHERBOARD BOARD_MKS_ROBIN_LITE
-opt_set SERIAL_PORT -1
+opt_set SERIAL_PORT 1
 opt_enable EEPROM_SETTINGS
 opt_enable SDSUPPORT
 exec_test $1 $2 "Default Configuration with Fallback SD EEPROM"
diff --git a/buildroot/tests/mks_robin_nano35-tests b/buildroot/tests/mks_robin_nano35-tests
index d67fa516b8..426f29d473 100644
--- a/buildroot/tests/mks_robin_nano35-tests
+++ b/buildroot/tests/mks_robin_nano35-tests
@@ -15,7 +15,7 @@ opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
 exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC"
 
 #
-# MKS Robin v2 nano LVGL SPI
+# MKS Robin v2 nano Emulated DOGM SPI
 # (Robin v2 nano has no FSMC interface)
 #
 use_example_configs Mks/Robin
diff --git a/buildroot/tests/mks_robin_nano35_stm32-tests b/buildroot/tests/mks_robin_nano35_stm32-tests
new file mode 100644
index 0000000000..58912b85a3
--- /dev/null
+++ b/buildroot/tests/mks_robin_nano35_stm32-tests
@@ -0,0 +1,69 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano
+# (STM32F1 genericSTM32F103VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS Robin nano v1.2 Emulated DOGM FSMC
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
+exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC"
+
+#
+# MKS Robin v2 nano Emulated DOGM SPI
+# (Robin v2 nano has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC
+opt_enable TFT_INTERFACE_SPI
+exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI"
+
+#
+# MKS Robin nano v1.2 LVGL FSMC
+#
+# use_example_configs Mks/Robin
+# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
+# opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+# opt_enable TFT_LVGL_UI TFT_RES_480x320
+# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC"
+
+#
+# MKS Robin v2 nano LVGL SPI
+# (Robin v2 nano has no FSMC interface)
+#
+# use_example_configs Mks/Robin
+# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
+# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI"
+
+#
+# MKS Robin v2 nano New Color UI 480x320 SPI
+# (Robin v2 nano has no FSMC interface)
+#
+use_example_configs Mks/Robin
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
+opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
+exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI"
+
+#
+# MKS Robin v2 nano LVGL SPI + TMC
+# (Robin v2 nano has no FSMC interface)
+#
+# use_example_configs Mks/Robin
+# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
+# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
+# opt_set X_DRIVER_TYPE TMC2209
+# opt_set Y_DRIVER_TYPE TMC2209
+# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC"
+
+# cleanup
+restore_configs
diff --git a/buildroot/tests/mks_robin_pro-tests b/buildroot/tests/mks_robin_pro-tests
index 50ec7b0dd1..3cafc6142f 100644
--- a/buildroot/tests/mks_robin_pro-tests
+++ b/buildroot/tests/mks_robin_pro-tests
@@ -8,6 +8,8 @@ set -e
 
 use_example_configs Mks/Robin_Pro
 opt_enable EMERGENCY_PARSER
+opt_set SERIAL_PORT 3
+opt_disable SERIAL_PORT_2
 opt_set SDCARD_CONNECTION LCD
 opt_set X_DRIVER_TYPE TMC2209
 opt_set Y_DRIVER_TYPE TMC2130
diff --git a/buildroot/tests/rambo-tests b/buildroot/tests/rambo-tests
index ec8af16c23..6fc720d1e1 100644
--- a/buildroot/tests/rambo-tests
+++ b/buildroot/tests/rambo-tests
@@ -60,6 +60,16 @@ opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
 opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
 exec_test $1 $2 "Rambo CNC Configuration"
 
+#
+# Rambo heated bed only
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO
+opt_set EXTRUDERS 0
+opt_set TEMP_SENSOR_BED 1
+opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+exec_test $1 $2 "Rambo heated bed only"
+
 #
 # Build with the default configurations
 #
diff --git a/platformio.ini b/platformio.ini
index b052a26b58..af7ce47a50 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -48,6 +48,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
   -<src/lcd/menu/menu_temperature.cpp>
   -<src/lcd/menu/menu_tmc.cpp>
   -<src/lcd/menu/menu_touch_screen.cpp>
+  -<src/lcd/menu/menu_tramming.cpp>
   -<src/lcd/menu/menu_ubl.cpp>
   -<src/lcd/extui/lib/mks_ui>
   -<src/lcd/extui/lib/dgus> -<src/lcd/extui/dgus_lcd.cpp>
@@ -259,6 +260,7 @@ HAS_MENU_CUTTER         = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
 HAS_MENU_TEMPERATURE    = src_filter=+<src/lcd/menu/menu_temperature.cpp>
 HAS_MENU_TMC            = src_filter=+<src/lcd/menu/menu_tmc.cpp>
 HAS_MENU_TOUCH_SCREEN   = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
+HAS_MENU_TRAMMING       = src_filter=+<src/lcd/menu/menu_tramming.cpp>
 HAS_MENU_UBL            = src_filter=+<src/lcd/menu/menu_ubl.cpp>
 ANYCUBIC_LCD_CHIRON     = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp> +<src/lcd/extui/lib/anycubic_chiron>
 ANYCUBIC_LCD_I3MEGA     = src_filter=+<src/lcd/extui/anycubic_i3mega_lcd.cpp> +<src/lcd/extui/lib/anycubic_i3mega>
@@ -434,9 +436,9 @@ src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 # ATmega2560
 #
 [env:mega2560]
-platform            = atmelavr
-extends             = common_avr8
-board               = megaatmega2560
+platform = atmelavr
+extends  = common_avr8
+board    = megaatmega2560
 
 #
 # ATmega2560 with extended pins 70-85 defined
@@ -457,9 +459,9 @@ extra_scripts       = ${common.extra_scripts}
 # ATmega1280
 #
 [env:mega1280]
-platform      = atmelavr
-extends       = common_avr8
-board         = megaatmega1280
+platform = atmelavr
+extends  = common_avr8
+board    = megaatmega1280
 
 #
 # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
@@ -474,81 +476,97 @@ upload_speed  = 57600
 # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
 #
 [env:MightyBoard2560]
-platform      = atmelavr
-extends       = common_avr8
-board         = ATmega2560
-upload_protocol = wiring
-upload_speed  = 57600
+platform                  = atmelavr
+extends                   = common_avr8
+board                     = ATmega2560
+upload_protocol           = wiring
+upload_speed              = 57600
 board_upload.maximum_size = 253952
 
 #
 # RAMBo
 #
 [env:rambo]
-platform      = atmelavr
-extends       = common_avr8
-board         = reprap_rambo
+platform = atmelavr
+extends  = common_avr8
+board    = reprap_rambo
 
 #
 # FYSETC F6 V1.3
 #
 [env:FYSETC_F6_13]
-platform      = atmelavr
-extends       = common_avr8
-board         = fysetc_f6_13
+platform = atmelavr
+extends  = common_avr8
+board    = fysetc_f6_13
 
 #
 # FYSETC F6 V1.4
 #
 [env:FYSETC_F6_14]
-platform      = atmelavr
-extends       = common_avr8
-board         = fysetc_f6_14
+platform = atmelavr
+extends  = common_avr8
+board    = fysetc_f6_14
 
 #
 # Sanguinololu (ATmega644p)
 #
 [env:sanguino644p]
-platform      = atmelavr
-extends       = common_avr8
-board         = sanguino_atmega644p
+platform = atmelavr
+extends  = common_avr8
+board    = sanguino_atmega644p
 
 #
 # Sanguinololu (ATmega1284p)
 #
 [env:sanguino1284p]
-platform      = atmelavr
-extends       = common_avr8
-board         = sanguino_atmega1284p
+platform                  = atmelavr
+extends                   = common_avr8
+board                     = sanguino_atmega1284p
 board_upload.maximum_size = 126976
 
 #
 # Melzi and clones (ATmega1284p)
 #
 [env:melzi]
-platform      = atmelavr
-extends       = common_avr8
-board         = sanguino_atmega1284p
-upload_speed  = 57600
-board_upload.maximum_size = 126976
+platform     = atmelavr
+extends      = env:sanguino1284p
+upload_speed = 57600
+
+#
+# Sanguinololu (ATmega1284p stock bootloader with tuned flags)
+#
+
+[tuned_1284p]
+build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
+
+[env:sanguino1284p_optimized]
+platform    = atmelavr
+extends     = env:melzi
+build_flags = ${tuned_1284p.build_flags}
+
+#
+# Melzi and clones (alias for sanguino1284p_optimized)
+#
+[env:melzi_optimized]
+platform = atmelavr
+extends  = env:sanguino1284p_optimized
 
 #
 # Melzi and clones (Optiboot bootloader)
 #
 [env:melzi_optiboot]
-platform      = atmelavr
-extends       = common_avr8
-board         = sanguino_atmega1284p
-upload_speed  = 115200
+platform     = atmelavr
+extends      = common_avr8
+board        = sanguino_atmega1284p
+upload_speed = 115200
 
 #
 # Melzi and clones (Zonestar Melzi2 with tuned flags)
 #
-[env:melzi_optimized]
-platform      = atmelavr
-extends       = env:melzi_optiboot
-build_flags   = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
-build_unflags = -g -ggdb
+[env:melzi_optiboot_optimized]
+platform    = atmelavr
+extends     = env:melzi_optiboot
+build_flags = ${tuned_1284p.build_flags}
 
 #
 # AT90USB1286 boards using CDC bootloader
@@ -558,10 +576,10 @@ build_unflags = -g -ggdb
 # - TEENSYLU
 #
 [env:at90usb1286_cdc]
-platform      = teensy
-extends       = common_avr8
-board         = at90usb1286
-lib_ignore    = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet
+platform   = teensy
+extends    = common_avr8
+board      = at90usb1286
+lib_ignore = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet
 
 #
 # AT90USB1286 boards using DFU bootloader
@@ -570,8 +588,8 @@ lib_ignore    = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet
 # - ? 5DPRINT ?
 #
 [env:at90usb1286_dfu]
-platform      = teensy
-extends       = env:at90usb1286_cdc
+platform = teensy
+extends  = env:at90usb1286_cdc
 
 #################################
 #                               #
@@ -586,20 +604,20 @@ extends       = env:at90usb1286_cdc
 #  - RADDS
 #
 [env:DUE]
-platform      = atmelsam
-board         = due
-src_filter    = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>
+platform   = atmelsam
+board      = due
+src_filter = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>
 
 [env:DUE_USB]
-platform      = atmelsam
-extends       = env:DUE
-board         = dueUSB
+platform = atmelsam
+extends  = env:DUE
+board    = dueUSB
 
 [env:DUE_debug]
 # Used when WATCHDOG_RESET_MANUAL is enabled
-platform      = atmelsam
-extends       = env:DUE
-build_flags   = ${common.build_flags}
+platform    = atmelsam
+extends     = env:DUE
+build_flags = ${common.build_flags}
   -funwind-tables
   -mpoke-function-name
 
@@ -607,24 +625,24 @@ build_flags   = ${common.build_flags}
 # Archim SAM
 #
 [common_DUE_archim]
-platform      = atmelsam
-extends       = env:DUE
-board         = archim
-build_flags   = ${common.build_flags}
+platform                 = atmelsam
+extends                  = env:DUE
+board                    = archim
+build_flags              = ${common.build_flags}
   -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
 board_build.variants_dir = buildroot/share/PlatformIO/variants/
-extra_scripts = ${common.extra_scripts}
+extra_scripts            = ${common.extra_scripts}
   Marlin/src/HAL/DUE/upload_extra_script.py
 
 [env:DUE_archim]
-platform      = ${common_DUE_archim.platform}
-extends       = common_DUE_archim
+platform = ${common_DUE_archim.platform}
+extends  = common_DUE_archim
 
 # Used when WATCHDOG_RESET_MANUAL is enabled
 [env:DUE_archim_debug]
-platform      = ${common_DUE_archim.platform}
-extends       = common_DUE_archim
-build_flags   = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
+platform    = ${common_DUE_archim.platform}
+extends     = common_DUE_archim
+build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
 
 #################################
 #                               #
@@ -678,14 +696,14 @@ build_flags       = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC17
 # NXP LPC176x ARM Cortex-M3
 #
 [env:LPC1768]
-platform  = ${common_LPC.platform}
-extends   = common_LPC
-board     = nxp_lpc1768
+platform = ${common_LPC.platform}
+extends  = common_LPC
+board    = nxp_lpc1768
 
 [env:LPC1769]
-platform  = ${common_LPC.platform}
-extends   = common_LPC
-board     = nxp_lpc1769
+platform = ${common_LPC.platform}
+extends  = common_LPC
+board    = nxp_lpc1769
 
 #################################
 #                               #
@@ -711,7 +729,7 @@ src_filter    = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/b
 [common_stm32f1]
 platform      = ststm32@~6.1
 build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
-  ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL
+  ${common.build_flags}
 build_unflags = -std=gnu11 -std=gnu++11
 src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
 lib_ignore    = SPI
@@ -1121,18 +1139,14 @@ build_flags   = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
 # Creality (STM32F103RET6)
 #
 [env:STM32F103RET6_creality]
-platform        = ${common_stm32f1.platform}
-extends         = common_stm32f1
-board           = genericSTM32F103RE
-build_flags     = !python Marlin/src/HAL/STM32F1/build_flags.py
-  ${common.build_flags} -std=gnu++14 -DSTM32_XL_DENSITY -DTEMP_TIMER_CHAN=4
-extra_scripts   = ${common.extra_scripts}
+platform        = ${env:STM32F103RE.platform}
+extends         = env:STM32F103RE
+build_flags     = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4
+extra_scripts   = ${env:STM32F103RE.extra_scripts}
   pre:buildroot/share/PlatformIO/scripts/random-bin.py
   buildroot/share/PlatformIO/scripts/creality.py
-lib_ignore      = ${common_stm32f1.lib_ignore}
 debug_tool      = jlink
 upload_protocol = jlink
-monitor_speed   = 115200
 
 #
 # FLSUN QQ (STM32F103VET6)
@@ -1363,6 +1377,11 @@ upload_speed  = 115200
 #upload_port   = marlinesp.local
 #board_build.flash_mode = qio
 
+[env:FYSETC_E4]
+platform               = espressif32@1.11.2
+extends                = env:esp32
+board_build.partitions = default_16MB.csv
+
 #
 # Teensy 3.1 / 3.2 (ARM Cortex-M4)
 #