Update Configuration_adv.h
This commit is contained in:
Foxies
parent
79a49de0ad
commit
66a2c85612
1 changed files with 21 additions and 21 deletions
|
|
@ -413,7 +413,7 @@
|
|||
// When first starting the main fan, run it at full speed for the
|
||||
// given number of milliseconds. This gets the fan spinning reliably
|
||||
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
||||
//#define FAN_KICKSTART_TIME 100
|
||||
#define FAN_KICKSTART_TIME 100
|
||||
|
||||
// Some coolers may require a non-zero "off" state.
|
||||
//#define FAN_OFF_PWM 1
|
||||
|
|
@ -653,8 +653,9 @@
|
|||
|
||||
//#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing
|
||||
|
||||
#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump
|
||||
// For delta all values must be the same
|
||||
#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
|
||||
|
||||
|
|
@ -805,8 +806,9 @@
|
|||
#define TRAMMING_POINT_NAME_2 "Front-Right"
|
||||
#define TRAMMING_POINT_NAME_3 "Back-Right"
|
||||
#define TRAMMING_POINT_NAME_4 "Back-Left"
|
||||
|
||||
#define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation
|
||||
|
||||
// Enable to restore leveling setup after operation
|
||||
#define RESTORE_LEVELING_AFTER_G35
|
||||
//#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first
|
||||
//#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming
|
||||
|
||||
|
|
@ -858,7 +860,7 @@
|
|||
|
||||
// Slow down the machine if the lookahead buffer is (by default) half full.
|
||||
// Increase the slowdown divisor for larger buffer sizes.
|
||||
#define SLOWDOWN
|
||||
//#define SLOWDOWN
|
||||
#if ENABLED(SLOWDOWN)
|
||||
#define SLOWDOWN_DIVISOR 2
|
||||
#endif
|
||||
|
|
@ -974,7 +976,7 @@
|
|||
* vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
|
||||
* lowest stepping frequencies.
|
||||
*/
|
||||
//#define ADAPTIVE_STEP_SMOOTHING
|
||||
#define ADAPTIVE_STEP_SMOOTHING
|
||||
|
||||
/**
|
||||
* Custom Microstepping
|
||||
|
|
@ -1049,7 +1051,8 @@
|
|||
// @section lcd
|
||||
|
||||
#if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI)
|
||||
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
|
||||
#define MANUAL_FEEDRATE_XYZ 50*60
|
||||
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
|
||||
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
|
||||
#if IS_ULTIPANEL
|
||||
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
|
||||
|
|
@ -1138,14 +1141,11 @@
|
|||
#endif
|
||||
|
||||
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
|
||||
//#define SHOW_REMAINING_TIME // Display estimated time to completion
|
||||
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
|
||||
#define SHOW_REMAINING_TIME // Display estimated time to completion
|
||||
#if ENABLED(SHOW_REMAINING_TIME)
|
||||
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
|
||||
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
|
||||
#endif
|
||||
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
|
||||
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
|
||||
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
|
||||
#endif
|
||||
|
||||
#if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
|
||||
|
|
@ -1181,7 +1181,7 @@
|
|||
|
||||
//#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
|
||||
|
||||
#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
|
||||
#define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
|
||||
|
||||
#if ENABLED(PRINTER_EVENT_LEDS)
|
||||
#define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
|
||||
|
|
@ -1195,13 +1195,13 @@
|
|||
* an option on the LCD screen to continue the print from the last-known
|
||||
* point in the file.
|
||||
*/
|
||||
//#define POWER_LOSS_RECOVERY
|
||||
#define POWER_LOSS_RECOVERY
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
#define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
|
||||
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
|
||||
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
#define POWER_LOSS_PIN -1 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
|
|
@ -2474,7 +2474,7 @@
|
|||
* Define your own with:
|
||||
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
|
||||
*/
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below)
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
|
||||
//#define CHOPPER_TIMING_X CHOPPER_DEFAULT_12V // For X Axes (override below)
|
||||
//#define CHOPPER_TIMING_X2 CHOPPER_DEFAULT_12V
|
||||
//#define CHOPPER_TIMING_Y CHOPPER_DEFAULT_12V // For Y Axes (override below)
|
||||
|
|
@ -2524,7 +2524,7 @@
|
|||
#define X2_HYBRID_THRESHOLD 100
|
||||
#define Y_HYBRID_THRESHOLD 100
|
||||
#define Y2_HYBRID_THRESHOLD 100
|
||||
#define Z_HYBRID_THRESHOLD 3
|
||||
#define Z_HYBRID_THRESHOLD 100
|
||||
#define Z2_HYBRID_THRESHOLD 3
|
||||
#define Z3_HYBRID_THRESHOLD 3
|
||||
#define Z4_HYBRID_THRESHOLD 3
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue