3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

MAX31865_SENSOR_OHMS_0 and MAX31865_SENSOR_OHMS_1

Browse source
This commit is contained in:
GadgetAngel 2020-11-09 09:35:31 -05:00 • committed by Scott Lahteine
parent cd1f90793a
commit 547bb146bc
1 changed files with 9 additions and 3 deletions
Download patch file Download diff file Expand all files Collapse all files

12
Marlin/Configuration.h
View file

@ -436,11 +436,17 @@
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
#define DUMMY_THERMISTOR_999_VALUE 100 #define DUMMY_THERMISTOR_999_VALUE 100
// Resistor values when using a MAX31865 (sensor -5) // Resistor values when using a MAX31865 (sensor -5) on TEMP_SENSOR_0
// Sensor value is typically 100 (PT100) or 1000 (PT1000) // Sensor value is typically 100 (PT100) or 1000 (PT1000)
// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules. // Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
//#define MAX31865_SENSOR_OHMS 100 //#define MAX31865_SENSOR_OHMS_0 100
//#define MAX31865_CALIBRATION_OHMS 430 //#define MAX31865_CALIBRATION_OHMS_0 430
// Resistor values when using a MAX31865 (sensor -5) TEMP_SENSOR_1
// Sensor value is typically 100 (PT100) or 1000 (PT1000)
// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
//#define MAX31865_SENSOR_OHMS_1 100
//#define MAX31865_CALIBRATION_OHMS_1 430
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
// from the two sensors differ too much the print will be aborted. // from the two sensors differ too much the print will be aborted.