3d_print_resources/Marlin
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity

Add Junction Deviation mm runtime setting (#10989)

Browse source
This commit is contained in:
Scott Lahteine 2018-06-10 18:02:40 -05:00 • committed by GitHub
parent f1ed08e369
commit 327b9c389d
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 124 additions and 69 deletions
Download patch file Download diff file Expand all files Collapse all files

31
Marlin/Marlin_main.cpp
View file

@ -9124,28 +9124,35 @@ inline void gcode_M204() {
/**
* M205: Set Advanced Settings
*
* B = Min Segment Time (µs)
* S = Min Feed Rate (units/s)
* T = Min Travel Feed Rate (units/s)
* B = Min Segment Time (µs)
* X = Max X Jerk (units/sec^2)
* Y = Max Y Jerk (units/sec^2)
* Z = Max Z Jerk (units/sec^2)
* E = Max E Jerk (units/sec^2)
* J = Junction Deviation (mm) (Requires JUNCTION_DEVIATION)
*/
inline void gcode_M205() {
if (parser.seen('B')) planner.min_segment_time_us = parser.value_ulong();
if (parser.seen('S')) planner.min_feedrate_mm_s = parser.value_linear_units();
if (parser.seen('T')) planner.min_travel_feedrate_mm_s = parser.value_linear_units();
if (parser.seen('B')) planner.min_segment_time_us = parser.value_ulong();
if (parser.seen('X')) planner.max_jerk[X_AXIS] = parser.value_linear_units();
if (parser.seen('Y')) planner.max_jerk[Y_AXIS] = parser.value_linear_units();
if (parser.seen('Z')) {
planner.max_jerk[Z_AXIS] = parser.value_linear_units();
#if HAS_MESH
if (planner.max_jerk[Z_AXIS] <= 0.1)
SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses.");
#endif
}
if (parser.seen('E')) planner.max_jerk[E_AXIS] = parser.value_linear_units();
#if ENABLED(JUNCTION_DEVIATION)
if (parser.seen('J')) planner.junction_deviation_mm = parser.value_linear_units();
#else
if (parser.seen('X')) planner.max_jerk[X_AXIS] = parser.value_linear_units();
if (parser.seen('Y')) planner.max_jerk[Y_AXIS] = parser.value_linear_units();
if (parser.seen('Z')) {
planner.max_jerk[Z_AXIS] = parser.value_linear_units();
#if HAS_MESH
if (planner.max_jerk[Z_AXIS] <= 0.1)
SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses.");
#endif
}
#endif
#if DISABLED(JUNCTION_DEVIATION) || ENABLED(LIN_ADVANCE)
if (parser.seen('E')) planner.max_jerk[E_AXIS] = parser.value_linear_units();
#endif
}
#if HAS_M206_COMMAND