Allow for distinct runout sensor pullup/pulldown
You need to define DISTINCT_FIL_RUNOUT_STATES, and then optionally FIL_RUNOUT#_PULLUP or FIL_RUNOUT#_PULLDOWN for each sensor you want to override.
This commit is contained in:
Costas Basdekis
parent
683b0c5021
commit
27a1ba405c
4 changed files with 266 additions and 30 deletions
|
|
@ -1176,26 +1176,50 @@
|
|||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN, and optionally a FIL_RUNOUT#_STATE, for each.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN, and optionally a FIL_RUNOUT#_STATE/FIL_RUNOUT#_PULLUP/FIL_RUNOUT#_PULLDOWN, for each.
|
||||
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
|
||||
/**
|
||||
* With this option each sensor can have a separate state than the first one.
|
||||
* To override the state for a sensor, up to NUM_RUNOUT_SENSORS, set
|
||||
* FIL_RUNOUT#_STATE, otherwise FIL_RUNOUT_STATE will be used.
|
||||
* FIL_RUNOUT#_STATE, otherwise FIL_RUNOUT_STATE will be used. Similarly with
|
||||
* FIL_RUNOUT#_PULLUP and FIL_RUNOUT#_PULLDOWN.
|
||||
*/
|
||||
//#define DISTINCT_FIL_RUNOUT_STATES
|
||||
#ifdef DISTINCT_FIL_RUNOUT_STATES
|
||||
//#define FIL_RUNOUT1_STATE LOW
|
||||
//#define FIL_RUNOUT1_PULLUP
|
||||
//#define FIL_RUNOUT1_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT2_STATE LOW
|
||||
//#define FIL_RUNOUT2_PULLUP
|
||||
//#define FIL_RUNOUT2_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT3_STATE LOW
|
||||
//#define FIL_RUNOUT3_PULLUP
|
||||
//#define FIL_RUNOUT3_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT4_STATE LOW
|
||||
//#define FIL_RUNOUT4_PULLUP
|
||||
//#define FIL_RUNOUT4_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT5_STATE LOW
|
||||
//#define FIL_RUNOUT5_PULLUP
|
||||
//#define FIL_RUNOUT5_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT6_STATE LOW
|
||||
//#define FIL_RUNOUT6_PULLUP
|
||||
//#define FIL_RUNOUT6_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT7_STATE LOW
|
||||
//#define FIL_RUNOUT7_PULLUP
|
||||
//#define FIL_RUNOUT7_PULLDOWN
|
||||
|
||||
//#define FIL_RUNOUT8_STATE LOW
|
||||
#endif
|
||||
//#define FIL_RUNOUT8_PULLUP
|
||||
//#define FIL_RUNOUT8_PULLDOWN
|
||||
#endif // DISTINCT_FIL_RUNOUT_STATES
|
||||
|
||||
// Set one or more commands to execute on filament runout.
|
||||
// (After 'M412 H' Marlin will ask the host to handle the process.)
|
||||
|
|
|
|||
|
|
@ -149,18 +149,106 @@ class FilamentSensorBase {
|
|||
|
||||
public:
|
||||
static inline void setup() {
|
||||
#if ENABLED(FIL_RUNOUT_PULLUP)
|
||||
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT_PULLDOWN)
|
||||
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#if ENABLED(FIL_RUNOUT1_PULLUP)
|
||||
#define INIT_RUNOUT1_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT1_PULLDOWN)
|
||||
#define INIT_RUNOUT1_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT1_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 1
|
||||
#if ENABLED(FIL_RUNOUT2_PULLUP)
|
||||
#define INIT_RUNOUT2_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT2_PULLDOWN)
|
||||
#define INIT_RUNOUT2_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT2_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 2
|
||||
#if ENABLED(FIL_RUNOUT3_PULLUP)
|
||||
#define INIT_RUNOUT3_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT3_PULLDOWN)
|
||||
#define INIT_RUNOUT3_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT3_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 3
|
||||
#if ENABLED(FIL_RUNOUT4_PULLUP)
|
||||
#define INIT_RUNOUT4_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT4_PULLDOWN)
|
||||
#define INIT_RUNOUT4_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT4_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 4
|
||||
#if ENABLED(FIL_RUNOUT5_PULLUP)
|
||||
#define INIT_RUNOUT5_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT5_PULLDOWN)
|
||||
#define INIT_RUNOUT5_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT5_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 5
|
||||
#if ENABLED(FIL_RUNOUT6_PULLUP)
|
||||
#define INIT_RUNOUT6_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT6_PULLDOWN)
|
||||
#define INIT_RUNOUT6_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT6_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 6
|
||||
#if ENABLED(FIL_RUNOUT7_PULLUP)
|
||||
#define INIT_RUNOUT7_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT7_PULLDOWN)
|
||||
#define INIT_RUNOUT7_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT7_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 7
|
||||
#if ENABLED(FIL_RUNOUT8_PULLUP)
|
||||
#define INIT_RUNOUT8_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT8_PULLDOWN)
|
||||
#define INIT_RUNOUT8_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT8_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif
|
||||
#else // !ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#if ENABLED(FIL_RUNOUT_PULLUP)
|
||||
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLUP(P)
|
||||
#elif ENABLED(FIL_RUNOUT_PULLDOWN)
|
||||
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLDOWN(P)
|
||||
#else
|
||||
#define INIT_RUNOUT_PIN(P) SET_INPUT(P)
|
||||
#endif
|
||||
#endif // ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
|
||||
#define _INIT_RUNOUT(N) INIT_RUNOUT_PIN(FIL_RUNOUT##N##_PIN);
|
||||
#if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#define _INIT_RUNOUT(N) INIT_RUNOUT##N##_PIN(FIL_RUNOUT##N##_PIN);
|
||||
#else
|
||||
#define _INIT_RUNOUT(N) INIT_RUNOUT_PIN(FIL_RUNOUT##N##_PIN);
|
||||
#endif
|
||||
REPEAT_S(1, INCREMENT(NUM_RUNOUT_SENSORS), _INIT_RUNOUT)
|
||||
#undef _INIT_RUNOUT
|
||||
#undef INIT_RUNOUT_PIN
|
||||
#if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#undef INIT_RUNOUT1_PIN
|
||||
#undef INIT_RUNOUT2_PIN
|
||||
#undef INIT_RUNOUT3_PIN
|
||||
#undef INIT_RUNOUT4_PIN
|
||||
#undef INIT_RUNOUT5_PIN
|
||||
#undef INIT_RUNOUT6_PIN
|
||||
#undef INIT_RUNOUT7_PIN
|
||||
#undef INIT_RUNOUT8_PIN
|
||||
#else
|
||||
#undef INIT_RUNOUT_PIN
|
||||
#endif
|
||||
}
|
||||
|
||||
// Return a bitmask of runout pin states
|
||||
|
|
|
|||
|
|
@ -714,36 +714,121 @@
|
|||
#define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
|
||||
#endif
|
||||
#endif
|
||||
#if EITHER(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
|
||||
#if ENABLED(FIL_RUNOUT_PULLUP)
|
||||
#if NONE(FIL_RUNOUT1_PULLUP, FIL_RUNOUT1_PULLDOWN)
|
||||
#define FIL_RUNOUT1_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT2_PULLUP, FIL_RUNOUT2_PULLDOWN)
|
||||
#define FIL_RUNOUT2_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT3_PULLUP, FIL_RUNOUT3_PULLDOWN)
|
||||
#define FIL_RUNOUT3_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT4_PULLUP, FIL_RUNOUT4_PULLDOWN)
|
||||
#define FIL_RUNOUT4_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT5_PULLUP, FIL_RUNOUT5_PULLDOWN)
|
||||
#define FIL_RUNOUT5_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT6_PULLUP, FIL_RUNOUT6_PULLDOWN)
|
||||
#define FIL_RUNOUT6_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT7_PULLUP, FIL_RUNOUT7_PULLDOWN)
|
||||
#define FIL_RUNOUT7_PULLUP
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT8_PULLUP, FIL_RUNOUT8_PULLDOWN)
|
||||
#define FIL_RUNOUT8_PULLUP
|
||||
#endif
|
||||
#else // !ENABLED(FIL_RUNOUT_PULLUP)
|
||||
#if NONE(FIL_RUNOUT1_PULLUP, FIL_RUNOUT1_PULLDOWN)
|
||||
#define FIL_RUNOUT1_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT2_PULLUP, FIL_RUNOUT2_PULLDOWN)
|
||||
#define FIL_RUNOUT2_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT3_PULLUP, FIL_RUNOUT3_PULLDOWN)
|
||||
#define FIL_RUNOUT3_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT4_PULLUP, FIL_RUNOUT4_PULLDOWN)
|
||||
#define FIL_RUNOUT4_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT5_PULLUP, FIL_RUNOUT5_PULLDOWN)
|
||||
#define FIL_RUNOUT5_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT6_PULLUP, FIL_RUNOUT6_PULLDOWN)
|
||||
#define FIL_RUNOUT6_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT7_PULLUP, FIL_RUNOUT7_PULLDOWN)
|
||||
#define FIL_RUNOUT7_PULLDOWN
|
||||
#endif
|
||||
#if NONE(FIL_RUNOUT8_PULLUP, FIL_RUNOUT8_PULLDOWN)
|
||||
#define FIL_RUNOUT8_PULLDOWN
|
||||
#endif
|
||||
#endif // ENABLED(FIL_RUNOUT_PULLUP)
|
||||
#endif // EITHER(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
|
||||
#else // !ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#undef FIL_RUNOUT1_STATE
|
||||
#undef FIL_RUNOUT1_PULLUP
|
||||
#undef FIL_RUNOUT1_PULLDOWN
|
||||
#define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT1_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT1_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#undef FIL_RUNOUT2_STATE
|
||||
#undef FIL_RUNOUT2_PULLUP
|
||||
#undef FIL_RUNOUT2_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 1
|
||||
#define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT2_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT2_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#undef FIL_RUNOUT3_STATE
|
||||
#undef FIL_RUNOUT3_PULLUP
|
||||
#undef FIL_RUNOUT3_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 2
|
||||
#define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT3_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT3_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#undef FIL_RUNOUT4_STATE
|
||||
#undef FIL_RUNOUT4_PULLUP
|
||||
#undef FIL_RUNOUT4_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 3
|
||||
#define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT4_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT4_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#undef FIL_RUNOUT5_STATE
|
||||
#undef FIL_RUNOUT5_PULLUP
|
||||
#undef FIL_RUNOUT5_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 4
|
||||
#define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT5_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT5_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#undef FIL_RUNOUT6_STATE
|
||||
#undef FIL_RUNOUT6_PULLUP
|
||||
#undef FIL_RUNOUT6_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 5
|
||||
#define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT6_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT6_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#undef FIL_RUNOUT7_STATE
|
||||
#undef FIL_RUNOUT7_PULLUP
|
||||
#undef FIL_RUNOUT7_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 6
|
||||
#define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT7_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT7_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#undef FIL_RUNOUT8_STATE
|
||||
#undef FIL_RUNOUT8_PULLUP
|
||||
#undef FIL_RUNOUT8_PULLDOWN
|
||||
#if NUM_RUNOUT_SENSORS > 7
|
||||
#define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
|
||||
#define FIL_RUNOUT8_PULLUP FIL_RUNOUT_PULLUP
|
||||
#define FIL_RUNOUT8_PULLDOWN FIL_RUNOUT_PULLDOWN
|
||||
#endif
|
||||
#endif // ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
|
||||
|
|
|
|||
|
|
@ -831,46 +831,85 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|||
#elif DISABLED(ADVANCED_PAUSE_FEATURE)
|
||||
static_assert(nullptr == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR.");
|
||||
#endif
|
||||
#if DISABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#ifdef FIL_RUNOUT1_STATE
|
||||
#warning "You have defined FIL_RUNOUT1_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#if BOTH(FIL_RUNOUT1_PULLUP, FIL_RUNOUT1_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT1_PULLUP or FIL_RUNOUT1_PULLDOWN."
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 1
|
||||
#ifdef FIL_RUNOUT2_STATE
|
||||
#warning "You have defined FIL_RUNOUT2_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT2_PULLUP, FIL_RUNOUT2_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT2_PULLUP or FIL_RUNOUT2_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 2
|
||||
#ifdef FIL_RUNOUT3_STATE
|
||||
#warning "You have defined FIL_RUNOUT3_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT3_PULLUP, FIL_RUNOUT3_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT3_PULLUP or FIL_RUNOUT3_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 3
|
||||
#ifdef FIL_RUNOUT4_STATE
|
||||
#warning "You have defined FIL_RUNOUT4_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT4_PULLUP, FIL_RUNOUT4_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT4_PULLUP or FIL_RUNOUT4_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 4
|
||||
#ifdef FIL_RUNOUT5_STATE
|
||||
#warning "You have defined FIL_RUNOUT5_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT5_PULLUP, FIL_RUNOUT5_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT5_PULLUP or FIL_RUNOUT5_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 5
|
||||
#ifdef FIL_RUNOUT6_STATE
|
||||
#warning "You have defined FIL_RUNOUT6_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT6_PULLUP, FIL_RUNOUT6_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT6_PULLUP or FIL_RUNOUT6_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 6
|
||||
#ifdef FIL_RUNOUT7_STATE
|
||||
#warning "You have defined FIL_RUNOUT7_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT7_PULLUP, FIL_RUNOUT7_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT7_PULLUP or FIL_RUNOUT7_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 7
|
||||
#ifdef FIL_RUNOUT8_STATE
|
||||
#warning "You have defined FIL_RUNOUT8_STATE but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#if BOTH(FIL_RUNOUT8_PULLUP, FIL_RUNOUT8_PULLDOWN)
|
||||
#error "Enable only one of FIL_RUNOUT8_PULLUP or FIL_RUNOUT8_PULLDOWN."
|
||||
#endif
|
||||
#endif
|
||||
#endif // DISABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#else // !ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#if MANY(defined(FIL_RUNOUT1_STATE), FIL_RUNOUT1_PULLUP, FIL_RUNOUT1_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT1_STATE/FIL_RUNOUT1_PULLUP/FIL_RUNOUT1_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 1
|
||||
#if MANY(defined(FIL_RUNOUT2_STATE), FIL_RUNOUT2_PULLUP, FIL_RUNOUT2_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT2_STATE/FIL_RUNOUT2_PULLUP/FIL_RUNOUT2_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 2
|
||||
#if MANY(defined(FIL_RUNOUT3_STATE), FIL_RUNOUT3_PULLUP, FIL_RUNOUT3_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT3_STATE/FIL_RUNOUT3_PULLUP/FIL_RUNOUT3_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 3
|
||||
#if MANY(defined(FIL_RUNOUT4_STATE), FIL_RUNOUT4_PULLUP, FIL_RUNOUT4_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT4_STATE/FIL_RUNOUT4_PULLUP/FIL_RUNOUT4_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 4
|
||||
#if MANY(defined(FIL_RUNOUT5_STATE), FIL_RUNOUT5_PULLUP, FIL_RUNOUT5_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT5_STATE/FIL_RUNOUT5_PULLUP/FIL_RUNOUT5_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 5
|
||||
#if MANY(defined(FIL_RUNOUT6_STATE), FIL_RUNOUT6_PULLUP, FIL_RUNOUT6_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT6_STATE/FIL_RUNOUT6_PULLUP/FIL_RUNOUT6_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 6
|
||||
#if MANY(defined(FIL_RUNOUT7_STATE), FIL_RUNOUT7_PULLUP, FIL_RUNOUT7_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT7_STATE/FIL_RUNOUT7_PULLUP/FIL_RUNOUT7_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#if NUM_RUNOUT_SENSORS > 7
|
||||
#if MANY(defined(FIL_RUNOUT8_STATE), FIL_RUNOUT8_PULLUP, FIL_RUNOUT8_PULLDOWN)
|
||||
#warning "You have defined FIL_RUNOUT8_STATE/FIL_RUNOUT8_PULLUP/FIL_RUNOUT8_PULLDOWN but you haven't defined DISTINCT_FIL_RUNOUT_STATES"
|
||||
#endif
|
||||
#endif
|
||||
#endif // ENABLED(DISTINCT_FIL_RUNOUT_STATES)
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue