diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2ef2a54ede..398c5e2cfb 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1187,28 +1187,26 @@
   #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
   #define NUM_RUNOUT_SENSORS   1          // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
 
-  //#define DISTINCT_FIL_RUNOUT_STATES    // Enable if runout sensors need distinct settings
-  #if DISABLED(DISTINCT_FIL_RUNOUT_STATES)
-    #define FIL_RUNOUT_STATE    LOW       // Pin state indicating that filament is NOT present.
-    #define FIL_RUNOUT_PULL               // Use internal pullup / pulldown for filament runout pins.
-  #else
-    #define FIL_RUNOUT1_STATE   LOW
-    #define FIL_RUNOUT1_PULL
-    #define FIL_RUNOUT2_STATE   LOW
-    #define FIL_RUNOUT2_PULL
-    //#define FIL_RUNOUT3_STATE LOW
-    //#define FIL_RUNOUT3_PULL
-    //#define FIL_RUNOUT4_STATE LOW
-    //#define FIL_RUNOUT4_PULL
-    //#define FIL_RUNOUT5_STATE LOW
-    //#define FIL_RUNOUT5_PULL
-    //#define FIL_RUNOUT6_STATE LOW
-    //#define FIL_RUNOUT6_PULL
-    //#define FIL_RUNOUT7_STATE LOW
-    //#define FIL_RUNOUT7_PULL
-    //#define FIL_RUNOUT8_STATE LOW
-    //#define FIL_RUNOUT8_PULL
-  #endif
+  #define FIL_RUNOUT_STATE    LOW         // Pin state indicating that filament is NOT present.
+  #define FIL_RUNOUT_PULL                 // Use internal pullup / pulldown for filament runout pins.
+
+  // Override individually if the runout sensors vary
+  //#define FIL_RUNOUT1_STATE LOW
+  //#define FIL_RUNOUT1_PULL
+  //#define FIL_RUNOUT2_STATE LOW
+  //#define FIL_RUNOUT2_PULL
+  //#define FIL_RUNOUT3_STATE LOW
+  //#define FIL_RUNOUT3_PULL
+  //#define FIL_RUNOUT4_STATE LOW
+  //#define FIL_RUNOUT4_PULL
+  //#define FIL_RUNOUT5_STATE LOW
+  //#define FIL_RUNOUT5_PULL
+  //#define FIL_RUNOUT6_STATE LOW
+  //#define FIL_RUNOUT6_PULL
+  //#define FIL_RUNOUT7_STATE LOW
+  //#define FIL_RUNOUT7_PULL
+  //#define FIL_RUNOUT8_STATE LOW
+  //#define FIL_RUNOUT8_PULL
 
   // Set one or more commands to execute on filament runout.
   // (After 'M412 H' Marlin will ask the host to handle the process.)
diff --git a/Marlin/src/feature/runout.h b/Marlin/src/feature/runout.h
index 5aefb68edc..dbb6e8a77f 100644
--- a/Marlin/src/feature/runout.h
+++ b/Marlin/src/feature/runout.h
@@ -150,7 +150,7 @@ class FilamentSensorBase {
   public:
     static inline void setup() {
       #define _INIT_RUNOUT_PIN(N,P) do{ if (DISABLED(FIL_RUNOUT##N##_PULL)) SET_INPUT(P) else if (FIL_RUNOUT##N##_STATE) SET_INPUT_PULLDOWN(P); else SET_INPUT_PULLUP(P); }while(0)
-      #define INIT_RUNOUT_PIN(N,P) _INIT_RUNOUT_PIN(TERN_(DISTINCT_FIL_RUNOUT_STATES, N),P)
+      #define  INIT_RUNOUT_PIN(N,P) _INIT_RUNOUT_PIN(N,P)
       #if NUM_RUNOUT_SENSORS >= 1
         INIT_RUNOUT_PIN(1, P)
       #endif
@@ -176,7 +176,7 @@ class FilamentSensorBase {
         INIT_RUNOUT_PIN(8, P)
       #endif
       #undef _INIT_RUNOUT_PIN
-      #undef INIT_RUNOUT_PIN
+      #undef  INIT_RUNOUT_PIN
     }
 
     // Return a bitmask of runout pin states
@@ -189,33 +189,29 @@ class FilamentSensorBase {
     // Return a bitmask of runout flag states (1 bits always indicates runout)
     static inline uint8_t poll_runout_states() {
       return poll_runout_pins() ^ uint8_t(0
-        #if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
-          #if NUM_RUNOUT_SENSORS >= 1
-            | (FIL_RUNOUT1_STATE ? 0 : _BV(1 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 2
-            | (FIL_RUNOUT2_STATE ? 0 : _BV(2 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 3
-            | (FIL_RUNOUT3_STATE ? 0 : _BV(3 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 4
-            | (FIL_RUNOUT4_STATE ? 0 : _BV(4 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 5
-            | (FIL_RUNOUT5_STATE ? 0 : _BV(5 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 6
-            | (FIL_RUNOUT6_STATE ? 0 : _BV(6 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 7
-            | (FIL_RUNOUT7_STATE ? 0 : _BV(7 - 1))
-          #endif
-          #if NUM_RUNOUT_SENSORS >= 8
-            | (FIL_RUNOUT8_STATE ? 0 : _BV(8 - 1))
-          #endif
-        #else // !DISTINCT_FIL_RUNOUT_STATES
-          | (FIL_RUNOUT_STATE ? 0 : _BV(NUM_RUNOUT_SENSORS) - 1)
+        #if NUM_RUNOUT_SENSORS >= 1
+          | (FIL_RUNOUT1_STATE ? 0 : _BV(1 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 2
+          | (FIL_RUNOUT2_STATE ? 0 : _BV(2 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 3
+          | (FIL_RUNOUT3_STATE ? 0 : _BV(3 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 4
+          | (FIL_RUNOUT4_STATE ? 0 : _BV(4 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 5
+          | (FIL_RUNOUT5_STATE ? 0 : _BV(5 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 6
+          | (FIL_RUNOUT6_STATE ? 0 : _BV(6 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 7
+          | (FIL_RUNOUT7_STATE ? 0 : _BV(7 - 1))
+        #endif
+        #if NUM_RUNOUT_SENSORS >= 8
+          | (FIL_RUNOUT8_STATE ? 0 : _BV(8 - 1))
         #endif
       );
     }
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 86e20d8a47..e43606e332 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -675,162 +675,78 @@
   #define HAS_BED_PROBE 1
 #endif
 
-#if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
-  #ifndef FIL_RUNOUT1_STATE
-    #define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #if ANY(FIL_RUNOUT1_STATE, FIL_RUNOUT1_PULL, FIL_RUNOUT2_STATE, FIL_RUNOUT2_PULL, \
+          FIL_RUNOUT3_STATE, FIL_RUNOUT3_PULL, FIL_RUNOUT4_STATE, FIL_RUNOUT4_PULL, \
+          FIL_RUNOUT5_STATE, FIL_RUNOUT5_PULL, FIL_RUNOUT6_STATE, FIL_RUNOUT6_PULL, \
+          FIL_RUNOUT7_STATE, FIL_RUNOUT7_PULL, FIL_RUNOUT8_STATE, FIL_RUNOUT8_PULL  )
+    #define DISTINCT_FIL_RUNOUT_STATES 1
   #endif
-  #if NUM_RUNOUT_SENSORS > 1
+  #if NUM_RUNOUT_SENSORS >= 1
+    #ifndef FIL_RUNOUT1_STATE
+      #define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
+    #endif
+    #ifndef FIL_RUNOUT1_PULL
+      #define FIL_RUNOUT1_PULL FIL_RUNOUT_PULL
+    #endif
+  #endif
+  #if NUM_RUNOUT_SENSORS >= 2
     #ifndef FIL_RUNOUT2_STATE
       #define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT2_PULL
+      #define FIL_RUNOUT2_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if NUM_RUNOUT_SENSORS > 2
+  #if NUM_RUNOUT_SENSORS >= 3
     #ifndef FIL_RUNOUT3_STATE
       #define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT3_PULL
+      #define FIL_RUNOUT3_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if NUM_RUNOUT_SENSORS > 3
+  #if NUM_RUNOUT_SENSORS >= 4
     #ifndef FIL_RUNOUT4_STATE
       #define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT4_PULL
+      #define FIL_RUNOUT4_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if NUM_RUNOUT_SENSORS > 4
+  #if NUM_RUNOUT_SENSORS >= 5
     #ifndef FIL_RUNOUT5_STATE
       #define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT5_PULL
+      #define FIL_RUNOUT5_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if NUM_RUNOUT_SENSORS > 5
+  #if NUM_RUNOUT_SENSORS >= 6
     #ifndef FIL_RUNOUT6_STATE
       #define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT6_PULL
+      #define FIL_RUNOUT6_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if NUM_RUNOUT_SENSORS > 6
+  #if NUM_RUNOUT_SENSORS >= 7
     #ifndef FIL_RUNOUT7_STATE
       #define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT7_PULL
+      #define FIL_RUNOUT7_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if NUM_RUNOUT_SENSORS > 7
+  #if NUM_RUNOUT_SENSORS >= 8
     #ifndef FIL_RUNOUT8_STATE
       #define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
     #endif
+    #ifndef FIL_RUNOUT8_PULL
+      #define FIL_RUNOUT8_PULL FIL_RUNOUT_PULL
+    #endif
   #endif
-  #if EITHER(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
-    #if ENABLED(FIL_RUNOUT_PULLUP)
-      #if NONE(FIL_RUNOUT1_PULLUP, FIL_RUNOUT1_PULLDOWN)
-        #define FIL_RUNOUT1_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT2_PULLUP, FIL_RUNOUT2_PULLDOWN)
-        #define FIL_RUNOUT2_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT3_PULLUP, FIL_RUNOUT3_PULLDOWN)
-        #define FIL_RUNOUT3_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT4_PULLUP, FIL_RUNOUT4_PULLDOWN)
-        #define FIL_RUNOUT4_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT5_PULLUP, FIL_RUNOUT5_PULLDOWN)
-        #define FIL_RUNOUT5_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT6_PULLUP, FIL_RUNOUT6_PULLDOWN)
-        #define FIL_RUNOUT6_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT7_PULLUP, FIL_RUNOUT7_PULLDOWN)
-        #define FIL_RUNOUT7_PULLUP
-      #endif
-      #if NONE(FIL_RUNOUT8_PULLUP, FIL_RUNOUT8_PULLDOWN)
-        #define FIL_RUNOUT8_PULLUP
-      #endif
-    #else // !FIL_RUNOUT_PULLUP
-      #if NONE(FIL_RUNOUT1_PULLUP, FIL_RUNOUT1_PULLDOWN)
-        #define FIL_RUNOUT1_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT2_PULLUP, FIL_RUNOUT2_PULLDOWN)
-        #define FIL_RUNOUT2_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT3_PULLUP, FIL_RUNOUT3_PULLDOWN)
-        #define FIL_RUNOUT3_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT4_PULLUP, FIL_RUNOUT4_PULLDOWN)
-        #define FIL_RUNOUT4_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT5_PULLUP, FIL_RUNOUT5_PULLDOWN)
-        #define FIL_RUNOUT5_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT6_PULLUP, FIL_RUNOUT6_PULLDOWN)
-        #define FIL_RUNOUT6_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT7_PULLUP, FIL_RUNOUT7_PULLDOWN)
-        #define FIL_RUNOUT7_PULLDOWN
-      #endif
-      #if NONE(FIL_RUNOUT8_PULLUP, FIL_RUNOUT8_PULLDOWN)
-        #define FIL_RUNOUT8_PULLDOWN
-      #endif
-    #endif // FIL_RUNOUT_PULLUP
-  #endif // FIL_RUNOUT_PULLUP || FIL_RUNOUT_PULLDOWN
-#else // !DISTINCT_FIL_RUNOUT_STATES
-  #undef FIL_RUNOUT1_STATE
-  #undef FIL_RUNOUT1_PULLUP
-  #undef FIL_RUNOUT1_PULLDOWN
-  #define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
-  #define FIL_RUNOUT1_PULLUP FIL_RUNOUT_PULLUP
-  #define FIL_RUNOUT1_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #undef FIL_RUNOUT2_STATE
-  #undef FIL_RUNOUT2_PULLUP
-  #undef FIL_RUNOUT2_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 1
-    #define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT2_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT2_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-  #undef FIL_RUNOUT3_STATE
-  #undef FIL_RUNOUT3_PULLUP
-  #undef FIL_RUNOUT3_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 2
-    #define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT3_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT3_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-  #undef FIL_RUNOUT4_STATE
-  #undef FIL_RUNOUT4_PULLUP
-  #undef FIL_RUNOUT4_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 3
-    #define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT4_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT4_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-  #undef FIL_RUNOUT5_STATE
-  #undef FIL_RUNOUT5_PULLUP
-  #undef FIL_RUNOUT5_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 4
-    #define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT5_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT5_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-  #undef FIL_RUNOUT6_STATE
-  #undef FIL_RUNOUT6_PULLUP
-  #undef FIL_RUNOUT6_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 5
-    #define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT6_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT6_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-  #undef FIL_RUNOUT7_STATE
-  #undef FIL_RUNOUT7_PULLUP
-  #undef FIL_RUNOUT7_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 6
-    #define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT7_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT7_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-  #undef FIL_RUNOUT8_STATE
-  #undef FIL_RUNOUT8_PULLUP
-  #undef FIL_RUNOUT8_PULLDOWN
-  #if NUM_RUNOUT_SENSORS > 7
-    #define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
-    #define FIL_RUNOUT8_PULLUP FIL_RUNOUT_PULLUP
-    #define FIL_RUNOUT8_PULLDOWN FIL_RUNOUT_PULLDOWN
-  #endif
-#endif // DISTINCT_FIL_RUNOUT_STATES
+#endif // FILAMENT_RUNOUT_SENSOR
 
 #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   #undef PROBE_MANUALLY
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 94959a9a19..f5827ba0b2 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -111,7 +111,7 @@
 #elif defined(FILAMENT_SENSOR)
   #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration."
 #elif defined(ENDSTOPPULLUP_FIL_RUNOUT)
-  #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP. Please update your configuration."
+  #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULL. Please update your configuration."
 #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
   #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
 #elif defined(LANGUAGE_INCLUDE)
@@ -660,8 +660,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 
 #if BOTH(ENDSTOPPULLUPS, ENDSTOPPULLDOWNS)
   #error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS."
-#elif BOTH(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
-  #error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN."
 #elif BOTH(ENDSTOPPULLUP_XMAX, ENDSTOPPULLDOWN_XMAX)
   #error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX."
 #elif BOTH(ENDSTOPPULLUP_YMAX, ENDSTOPPULLDOWN_YMAX)
@@ -834,27 +832,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #elif DISABLED(ADVANCED_PAUSE_FEATURE)
     static_assert(nullptr == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR.");
   #endif
-
-  #if ENABLED(DISTINCT_FIL_RUNOUT_STATES)
-    #if NUM_RUNOUT_SENSORS >= 1 && !defined(FIL_RUNOUT1_STATE)
-      #error "FIL_RUNOUT1_STATE is required with NUM_RUNOUT_SENSORS >= 2."
-    #elif NUM_RUNOUT_SENSORS >= 2 && !defined(FIL_RUNOUT2_STATE)
-      #error "FIL_RUNOUT2_STATE is required with NUM_RUNOUT_SENSORS >= 2."
-    #elif NUM_RUNOUT_SENSORS >= 3 && !defined(FIL_RUNOUT3_STATE)
-      #error "FIL_RUNOUT3_STATE is required with NUM_RUNOUT_SENSORS >= 3."
-    #elif NUM_RUNOUT_SENSORS >= 4 && !defined(FIL_RUNOUT4_STATE)
-      #error "FIL_RUNOUT4_STATE is required with NUM_RUNOUT_SENSORS >= 4."
-    #elif NUM_RUNOUT_SENSORS >= 5 && !defined(FIL_RUNOUT5_STATE)
-      #error "FIL_RUNOUT5_STATE is required with NUM_RUNOUT_SENSORS >= 5."
-    #elif NUM_RUNOUT_SENSORS >= 6 && !defined(FIL_RUNOUT6_STATE)
-      #error "FIL_RUNOUT6_STATE is required with NUM_RUNOUT_SENSORS >= 6."
-    #elif NUM_RUNOUT_SENSORS >= 7 && !defined(FIL_RUNOUT7_STATE)
-      #error "FIL_RUNOUT7_STATE is required with NUM_RUNOUT_SENSORS >= 7."
-    #elif NUM_RUNOUT_SENSORS >= 8 && !defined(FIL_RUNOUT8_STATE)
-      #error "FIL_RUNOUT8_STATE is required with NUM_RUNOUT_SENSORS >= 8."
-    #endif
-  #endif
-
 #endif
 
 /**
diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
index a1d1217d6e..4725afb8bc 100644
--- a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
+++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
@@ -76,8 +76,8 @@ namespace Anycubic {
     #endif
 
     // Filament runout is handled by Marlin settings in Configuration.h
-    // set FIL_RUNOUT_STATE HIGH  // Pin state indicating that filament is NOT present.
-    // enable FIL_RUNOUT_PULLUP
+    // opt_set    FIL_RUNOUT_STATE HIGH  // Pin state indicating that filament is NOT present.
+    // opt_enable FIL_RUNOUT_PULL
 
     TFTSer.begin(115200);
 
diff --git a/buildroot/tests/BIGTREE_GTR_V1_0-tests b/buildroot/tests/BIGTREE_GTR_V1_0-tests
index 5f43e1ed57..1db0bcffd2 100644
--- a/buildroot/tests/BIGTREE_GTR_V1_0-tests
+++ b/buildroot/tests/BIGTREE_GTR_V1_0-tests
@@ -24,8 +24,7 @@ opt_set E2_AUTO_FAN_PIN PC12
 opt_set X_DRIVER_TYPE TMC2208
 opt_set Y_DRIVER_TYPE TMC2130
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE \
-           DISTINCT_FIL_RUNOUT_STATES ADVANCED_PAUSE_FEATURE
+opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
 opt_set FIL_RUNOUT_PIN 3
 opt_set FIL_RUNOUT2_PIN 4
 opt_set FIL_RUNOUT3_PIN 5
@@ -35,9 +34,9 @@ opt_set FIL_RUNOUT6_PIN 8
 opt_set FIL_RUNOUT7_PIN 9
 opt_set FIL_RUNOUT8_PIN 10
 opt_set FIL_RUNOUT4_STATE HIGH
-opt_enable FIL_RUNOUT4_PULLDOWN
+opt_enable FIL_RUNOUT4_PULL
 opt_set FIL_RUNOUT8_STATE HIGH
-opt_enable FIL_RUNOUT8_PULLDOWN
+opt_enable FIL_RUNOUT8_PULL
 exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states"
 
 restore_configs
diff --git a/buildroot/tests/mega2560-tests b/buildroot/tests/mega2560-tests
index 060e22d902..9ae43dcdb5 100755
--- a/buildroot/tests/mega2560-tests
+++ b/buildroot/tests/mega2560-tests
@@ -85,8 +85,7 @@ opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_
            AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
            NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
            PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
-           FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING \
-           DISTINCT_FIL_RUNOUT_STATES FIL_RUNOUT3_PULLUP
+           FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULL
 opt_set MIXING_STEPPERS 5
 opt_set FIL_RUNOUT3_STATE HIGH
 exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states"